The telnet server for 3Com hardware such as PS40 SuperStack II does not delay or disconnect remote attackers who provide an incorrect username or password, which makes it easier to break into the server via brute force password guessing.

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.

Lightwave ConsoleServer 3200 does not disconnect users after unsuccessful login attempts, which could allow remote attackers to conduct brute force password guessing.

This vulnerability exists in Apex Softcell LD Geo due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on login OTP, which could lead to gain unauthorized access to other user accounts.

VAXstations running Open VMS 5.3 through 5.5-2 with VMS DECwindows or MOTIF do not properly disable access to user accounts that exceed the break-in limit threshold for failed login attempts, which makes it easier for attackers to conduct brute force password guessing.

Dell PowerScale OneFS versions prior to 9.13.0.0 contains an improper restriction of excessive authentication attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.

This vulnerability exists in Shilpi Client Dashboard due to missing restrictions for incorrect login attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on password, which could lead to gain unauthorized access to other user accounts.

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or misrouting legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.

Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.

Impact varies for each individual vulnerability in the application. For generation of accounts, it may be possible, depending on the amount of system resources available, to create a DoS event in the server. These accounts still need to be activated; however, it is possible to identify the output Status Code to separate accounts that are generated and waiting for email verification. \n\nFor the sign in directories, it is possible to brute force login attempts to either login portal, which could lead to account compromise.

This vulnerability exists in Reedos aiM-Star version 2.0.1 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user passwords, which could lead to gain unauthorized access and compromise other user accounts.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

Nextcloud Talk is a video and audio conferencing app for Nextcloud. Prior to versions 12.2.7, 13.0.7, and 14.0.3, password protected conversations are susceptible to brute force attacks if the attacker has the link/conversation token. It is recommended that the Nextcloud Talk application is upgraded to 12.2.7, 13.0.7 or 14.0.3. There are currently no known workarounds available apart from not having password protected conversations.

Dell SupportAssist contains a rate limit bypass issues in screenmeet API third party component. An unauthenticated attacker could potentially exploit this vulnerability and impersonate a legitimate dell customer to a dell support technician.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

An Improper Restriction of Excessive Authentication Attempts issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. There are no penalties for repeatedly entering incorrect passwords.

Nextcloud server is an open source personal cloud solution. In affected versions an attacker could brute force to find if federated sharing is being used and potentially try to brute force access tokens for federated shares (`a-zA-Z0-9` ^ 15). It is recommended that the Nextcloud Server is upgraded to 22.2.9, 23.0.6 or 24.0.2. Users unable to upgrade may disable federated sharing via the Admin Sharing settings in `index.php/settings/admin/sharing`.

Dell EMC PowerStore, contain(s) an Improper Restriction of Excessive Authentication Attempts Vulnerability in PowerStore Manager GUI. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.

Dell RecoverPoint for Virtual Machines 5.3.x, 6.0.SP1 contains a brute force/dictionary attack vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to launch a brute force attack or a dictionary attack against the RecoverPoint login form. This allows attackers to brute-force the password of valid users in an automated manner.

Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.4, there is a security vulnerability in Vaultwarden that allows bypassing the login brute-force protection if email 2fa is enabled. If email 2fa is enabled, the unprotected 2fa-function send_email_login (email.rs, api endpoint /api/two-factor/send-email-login) also acts as an oracle determining whether a username-password combination is correct. An attacker can abuse that endpoint to brute-force passwords without rate-limiting. This works even for users who don't have email 2fa configured. This vulnerability is fixed in 1.35.4.

A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

Improper Restriction of Excessive Authentication Attempts in GitHub repository wger-project/wger prior to 2.2.

A vulnerability has been identified in Mendix Forgot Password Appstore module (All versions >= V3.3.0 < V3.5.1), Mendix Forgot Password Appstore module (Mendix 7 compatible) (All versions < V3.2.2). Initial passwords are generated in an insecure manner. This could allow an unauthenticated remote attacker to efficiently brute force passwords in specific situations.

Improper Restriction of Excessive Authentication Attempts in GitHub repository janeczku/calibre-web prior to 0.6.20.

A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

An issue was discovered in DSK DSKNet 2.16.136.0 and 2.17.136.5. It mishandles access control. This allows a remote attacker to access account information pages (including personal data) without being authenticated. The collected information includes the badge numbers that operate as user login names. They have a PIN code. The PIN code is 4 digits and thus can be guessed in 10000 brute force attempts.

In ExtremeGuest Essentials before 25.5.0, captive-portal may permit unauthorized access via manual brute-force procedure. Under certain ExtremeGuest Essentials captive-portal SSID configurations, repeated manual login attempts may allow an unauthenticated device to be marked as authenticated and obtain network access. Client360 logs may display the client MAC as the username despite no MAC-authentication being enabled.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

The Login with OTP plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.6. This is due to an incomplete fix for CVE-2024-11178: the rate-limit/lockout check added to `otpl_login_action()` was placed only inside the OTP-generation branch and is never evaluated on the OTP-validation branch, and the generated 6-digit OTP additionally has no expiration. This makes it possible for unauthenticated attackers to brute-force the 900,000-value OTP space for any user account (including administrators) and obtain a valid `wp_set_auth_cookie()` session, leading to full site compromise.

Dell EMC AppSync versions 3.9 to 4.3 contain an Improper Restriction of Excessive Authentication Attempts Vulnerability that can be exploited from UI and CLI. An adjacent unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.

In Eclipse GlassFish versions before 8.0.3 it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts. GlassFish 8.0.3 adds automatic attack protection documented in https://glassfish.org/docs/latest/security-guide.html#brute-force-attack-protection .

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

Dell PowerScale OneFS, versions 8.2.x-9.3.0.x, contain an improper restriction of excessive authentication attempts. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to compromised accounts.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

An IBM Spectrum Protect storage agent could allow a remote attacker to perform a brute force attack by allowing unlimited attempts to login to the storage agent without locking the administrative ID. A remote attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to both the IBM Spectrum Protect storage agent and the IBM Spectrum Protect Server 8.1.0.000 through 8.1.14 with which it communicates. IBM X-Force ID: 226326.

Improper restriction of excessive authentication attempts vulnerability in Başbelen Group Food Cafe Businesses Industry and Trade Ltd. Co. Pause+ Mobile App allows Authentication Bypass. This issue affects Pause+ Mobile App: from v1.0.6 before v1.5.

Outline is a service that allows for collaborative documentation. Outline implements an Email OTP login flow for users not associated with an Identity Provider. Starting in version 0.86.0 and prior to version 1.6.0, Outline does not invalidate OTP codes based on amount or frequency of invalid submissions, rather it relies on the rate limiter to restrict attempts. Consequently, identified bypasses in the rate limiter permit unrestricted OTP code submissions within the codes lifetime. This allows attackers to perform brute force attacks which enable account takeover. Version 1.6.0 fixes the issue.

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

Federated Learning and Interoperability Platform (FLIP) is an open-source platform for federated training and evaluation of medical imaging AI models across healthcare institutions. The FLIP login page in versions 0.1.1 and prior has no rate limiting or CAPTCHA, enabling brute-force and credential-stuffing attacks. FLIP users are external to the organization, increasing credential reuse risk. As of time of publication, it is unclear if a patch is available.

ChurchCRM is an open-source church management system. In versions prior to 7.2.0, the public API login endpoint (/api/public/user/login) returns distinguishable HTTP response codes based on whether a username exists: 404 for non-existent users and 401 for valid users with incorrect passwords. An unauthenticated attacker can exploit this difference to enumerate valid usernames, with no rate limiting or account lockout to impede the process. This issue has been fixed in version 7.2.0.

Various rest resources in Fisheye and Crucible before version 4.8.9 allowed remote attackers to brute force user login credentials as rest resources did not check if users were beyond their max failed login limits and therefore required solving a CAPTCHA in addition to providing user credentials for authentication via a improper restriction of excess authentication attempts vulnerability.

A brute-force protection bypass in CAPTCHA protection in ASUS ROG Rapture GT-AX11000, RT-AX3000, RT-AX55, RT-AX56U, RT-AX56U_V2, RT-AX58U, RT-AX82U, RT-AX82U GUNDAM EDITION, RT-AX86 Series(RT-AX86U/RT-AX86S), RT-AX86U ZAKU II EDITION, RT-AX88U, RT-AX92U, TUF Gaming AX3000, TUF Gaming AX5400 (TUF-AX5400), ASUS ZenWiFi XD6, ASUS ZenWiFi AX (XT8) before 3.0.0.4.386.45898, and RT-AX68U before 3.0.0.4.386.45911, allows a remote attacker to attempt any number of login attempts via sending a specific HTTP request.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

This vulnerability exists in the Wave 2.0 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user OTP, MPIN or password, which could lead to gain unauthorized access and compromise other user accounts.

WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `get_api_video_password_is_correct` API endpoint allows any unauthenticated user to verify whether a given password is correct for any password-protected video. The endpoint returns a boolean `passwordIsCorrect` field with no rate limiting, CAPTCHA, or authentication requirement, enabling efficient offline-speed brute-force attacks against video passwords. Commit 01a0614fedcdaee47832c0d913a0fb86d8c28135 contains a patch.

Fuel CMS 1.5.0 has a brute force vulnerability in fuel/modules/fuel/controllers/Login.php

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.