The Apache Traffic Server txn_box plugin overflows the stack from attacker-controlled input. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue.
The Apache Traffic Server uri_signing and url_sig plugins can exhaust the stack or crash on attacker input. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue.
The function ClientEAPOLKeyRecvd() in the Realtek RTL8195A Wi-Fi Module prior to versions released in April 2020 (up to and excluding 2.08) does not validate the size parameter for an rtl_memcpy() operation, resulting in a stack buffer overflow which can be exploited for denial of service. An attacker can impersonate an Access Point and attack a vulnerable Wi-Fi client, by injecting a crafted packet into the WPA2 handshake. The attacker does not need to know the network's PSK.
HCL DFXAnalytics is affected by a Buffer Overflow vulnerability that can lead to a Denial of Service (DoS). The application fails to properly validate input sizes, allowing an attacker to pass an excessive amount of information into a memory container, which can cause the system to crash or become unresponsive. To mitigate this flaw, comprehensive input length checks must be implemented and enforced on both the client and server sides.
A Stack-based buffer overflow vulnerability in the SonicOS SSLVPN service allows a remote unauthenticated attacker to cause Denial of Service (DoS), which could cause an impacted firewall to crash.
AMR-NB codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service
Stack-based buffer overflow in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
Buffer Overflow vulnerability in aMULE-Project aMule v.2.3.3 allows a remote attacker to cause a denial of service via the OP_SERVERMESSAGE Handler.
Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_448384 component
Tenda CP3 V3.0 firmware V31.1.9.91 contains a stack-based buffer overflow in the RTSP service. The device fails to validate the length of the clock= value in the Range header field when processing a PLAY request. An unauthenticated remote attacker who has completed a standard RTSP session handshake can send a PLAY request with an excessively long clock= value to cause the RTSP service to crash.
Stack-based buffer overflow in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
A stack-based buffer overflow vulnerability in the RTSP service of Tenda CP3 V3.0 (firmware V31.1.9.91) allows an unauthenticated remote attacker to cause a denial of service via a crafted SETUP request. The RTSP service's second-stage URL routing parser fails to validate the length of the URL field in the first SETUP request. By supplying a URL consisting of exactly four consecutive repetitions of a valid RTSP URL, an attacker can bypass first-stage format validation and trigger a stack buffer overflow, causing an immediate crash of the RTSP service process and rendering the device inaccessible to all clients on the local network.
Stack-based buffer overflow in Active Directory Federation Services allows an unauthorized attacker to deny service over a network.
A flaw was found in libsolv. A stack-based buffer overflow vulnerability exists in the PGP verification component due to incorrect length handling when copying EdDSA 's' MPI into a stack buffer. A remote attacker could craft a malicious Ed25519 PGP signature with mismatched MPI lengths. Processing this crafted signature could lead to a denial of service in automated package or repository processing workflows.
ipmi-oem in FreeIPMI before 1.6.18 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Two subcommands "ipmi-oem dell get-active-directory-config" and "ipmi-oem fujitsu get-sel-entry-long-text" were found to have exploitable buffer overflows on response messages.
The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to cause a memory corruption via a Read Request.
Stack-based buffer overflow in Active Directory Federation Services allows an unauthorized attacker to deny service over a network.
In IMS, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service with no additional execution privileges needed.
NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause a stack-based buffer overflow. A successful exploit of this vulnerability might lead to denial of service.
Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the bindDhcpIndex parameter in the modifyDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.
A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. Processing a maliciously crafted image may corrupt process memory.
IBM WebSphere Application Server 9.0 and WebSphere Application Server Liberty 17.0.0.3 through 25.0.0.7 are vulnerable to a denial of service, caused by a stack-based overflow. An attacker can send a specially crafted request that cause the server to consume excessive memory resources.
CryptX versions before 0.088_001 for Perl have a stack buffer overflow in four AEAD decrypt_verify helpers. The gcm_decrypt_verify, ccm_decrypt_verify, chacha20poly1305_decrypt_verify and eax_decrypt_verify XS routines copied the caller-supplied authentication tag into a fixed 144-byte stack buffer (MAXBLOCKSIZE) without checking the supplied length. A longer tag overwrites the stack past the buffer. Version 0.088 added the clamp to gcm_decrypt_verify, and 0.088_001 added it to the other three. Any caller of an affected helper that forwards an attacker-controlled tag longer than the buffer can trigger the overflow.
rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.39 to before 0.10.78, EVP_DigestFinal() always writes EVP_MD_CTX_size(ctx) to the out buffer. If out is smaller than that, MdCtxRef::digest_final() writes past its end, usually corrupting the stack. This is reachable from safe Rust. This vulnerability is fixed in 0.10.78.
A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal.
AGL agl-service-can-low-level contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE.
In the crypt function, we attempt to null terminate a buffer using the size of the input salt without validating that the offset is within the buffer. This issue affects HHVM versions prior to 4.56.3, all versions between 4.57.0 and 4.80.1, all versions between 4.81.0 and 4.93.1, and versions 4.94.0, 4.95.0, 4.96.0, 4.97.0, 4.98.0.
ngtcp2 is a C implementation of the IETF QUIC protocol. In versions prior to 1.22.1, ngtcp2_qlog_parameters_set_transport_params() serializes peer transport parameters into a fixed 1024-byte stack buffer without bounds checking. When qlog is enabled, a remote peer can send sufficiently large transport parameters during the QUIC handshake to cause writes beyond the buffer boundary, resulting in a stack buffer overflow. This affects deployments that enable the qlog callback and process untrusted peer transport parameters. This issue has been fixed in version 1.22.1. If developers are unable to immediately upgrade, they can disable the qlog on client.
Buffer overflow vulnerability has been found in "extension/readdir.c" program file of gawk (ftype() routine). This issue could be used to crash the program and potentially to achieve code execution, although the latter has not been confirmed to be feasible. It affects gawk in versions 5.4.0 and below.
Tenda i12 V1.0.0.10(3805) was discovered to contain a buffer overflow via the ping1 parameter in the formSetAutoPing function.
A stack buffer overflow vulnerability was found in GStreamer's DTLS plugin. During a DTLS handshake, the peer certificate Subject Distinguished Name is printed into a fixed-size 2048-byte stack buffer without bounds checking. A remote unauthenticated attacker can send a certificate with an oversized Subject DN that exceeds the buffer, causing a stack buffer overflow and process crash, resulting in denial of service.
Tenda AC8V4.0 V16.03.34.06 was discovered to contain a stack overflow via the deviceid parameter in the get_parentControl_list_Info function.
Buffer Overflow vulnerability in EPSON L14150 FL27PB allows a remote attacker to execute arbitrary code via the RAW Printing Service (JetDirect) on TCP port 9100
striso-control-firmware 54c9722 is vulnerable to Buffer Overflow in function AuxJack.
TOTOLINK A810R V4.1.2cu.5182_B20201026 was found to contain a buffer overflow vulnerability in downloadFile.cgi.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
striso-control-firmware 54c9722 is vulnerable to Buffer Overflow in function ThreadReadButtons.
A stack overflow in the evaluate() function (editors/awk.c) of BusyBox commit 371fe9 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AWK script.
Triangle MicroWorks SCADA Data Gateway 3.02.0697 through 4.0.122, 2.41.0213 through 4.0.122 allows remote attackers cause a denial-of-service condition due to a lack of proper validation of the length of user-supplied data, prior to copying it to a fixed-length stack-based buffer. Authentication is not required to exploit this vulnerability.
Shenzhen Tenda Technology Co., Ltd Tenda O3 Wireless Router v1.0.0.5(4180) was discovered to contain multiple stack overflows in the fromVirtualSer function via the puVar2, puVar1, __s2, __s1_00, and puVar3 parameters. These vulnerabilities allow attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE.
Shenzhen Tenda Technology Co., Ltd Tenda O3v3 v1.0.0.5 was discovered to contain a stack overflow in the save_list_data parameter of the formSetCfm function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda W15E v15.11.0.10 was discovered to contain a buffer overflow in the webAuthUserPwd parameter of the formModifyWebAuthUser function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda W3 Wireless Router v1.0.0.3(2204) was discovered to contain a stack overflow in the wl_radio parameter of the formwrlSSIDset function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
Shenzhen Tenda Technology Co., Ltd Tenda W20E v15.11.0.6 was discovered to contain a buffer overflow in the macAddr parameter of the formDelStaState function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda W20E v15.11.0.6 was discovered to contain a buffer overflow in the webAuthUserInfo parameter of the formAddWebAuthUser function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda FH451 V1.0.0.9 was discovered to contain a stack overflow in the list1 parameter of the fromDhcpListClient function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda O3 Wireless Router v1.0.0.5(4180) was discovered to contain a stack overflow in the domain parameter of the fromNetToolGet function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda W20E v15.11.0.6 was discovered to contain a buffer overflow in the picCropName parameter of the formCropAndSetWewifiPic function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Shenzhen Tenda Technology Co., Ltd Tenda W3 Wireless Router v1.0.0.3(2204) was discovered to contain a stack overflow in the wl_radio parameter of the formWifiRadioSet function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.