TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection via the host_time parameter in the NTPSyncWithHost function.

A vulnerability in NuPoint Messenger (NPM) of Mitel MiCollab through 9.8.0.33 allows an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization.

Tenda O3V2 v1.0.0.12(3880) was discovered to contain a Blind Command Injection via stpEn parameter in the SetStp function. This vulnerability allows attackers to execute arbitrary commands with root privileges.

A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01. Affected is the function wake_on_lan. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 contains a command execution vulnerability in the setDeviceName interface of the /lib/cste_modules/global.so library, specifically in the processing of the deviceMac parameter.

Remote Code Execution has been discovered in OpenText™ iManager 3.2.6.0200. The vulnerability can trigger command injection and insecure deserialization issues.

Green Packet WiMax DV-360 2.10.14-g1.0.6.1 devices allow Command Injection, with unauthenticated remote command execution, via a crafted payload to the HTTPS port, because lighttpd listens on all network interfaces (including the external Internet) by default. NOTE: this may overlap CVE-2017-9980.

Blink routers BL-WR9000 V2.4.9 , BL-AC2100_AZ3 V1.0.4, BL-X10_AC8 v1.0.5 , BL-LTE300 v1.2.3, BL-F1200_AT1 v1.0.0, BL-X26_AC8 v1.2.8, BLAC450M_AE4 v4.0.0 and BL-X26_DA3 v1.2.7 were discovered to contain a command injection vulnerability via the bs_SetSSIDHide function.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the username parameter.

A command inject vulnerability allows an attacker to perform command injection on Windows applications that indirectly depend on the CreateProcess function when the specific conditions are satisfied.

A vulnerability was found in D-Link DIR-619L 2.04B04. It has been declared as critical. This vulnerability affects the function wake_on_lan. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to command injection. The variables exp_dir1, np7, trainset_dir4 and sr2 take user input and pass it to the preprocess_dataset function, which concatenates them into a command that is run on the server. This can lead to arbitrary command execution. As of time of publication, no known patches exist.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ftext function of upload_firmware.cgi, which allows remote attackers to execute arbitrary commands via shell.

This affects all versions of package heroku-env. The injection point is located in lib/get.js which is required by index.js.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

A vulnerability was found in Tenda RX3 16.03.13.11_multi. It has been rated as critical. This issue affects some unknown processing of the file /goform/telnet. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An os command injection vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted set of HTTP requests can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

pgAdmin <= 8.4 is affected by a Remote Code Execution (RCE) vulnerability through the validate binary path API. This vulnerability allows attackers to execute arbitrary code on the server hosting PGAdmin, posing a severe risk to the database management system's integrity and the security of the underlying data.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.0.28 and earlier) allows a malicious actor with UniFi Network Application Administrator credentials to escalate privileges to root on the host device. Affected Products: UniFi Network Application (Version 8.0.28 and earlier) . Mitigation: Update UniFi Network Application to Version 8.1.113 or later.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

FitNesse all releases allows a remote authenticated attacker to execute arbitrary OS commands. Note: A contributor of FitNesse has claimed that this is not a vulnerability but a product specification and this is currently under further investigation.

An issue in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to execute arbitrary code via a crafted request.

A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

Python Software Foundation Python (CPython) version 2.7 contains a CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in shutil module (make_archive function) that can result in Denial of service, Information gain via injection of arbitrary files on the system or entire drive. This attack appear to be exploitable via Passage of unfiltered user input to the function. This vulnerability appears to have been fixed in after commit add531a1e55b0a739b0f42582f1c9747e5649ace.

Sublime Text 4 was discovered to contain a command injection vulnerability via the New Build System module. NOTE: multiple third parties report that this is intended behavior.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

A command injection vulnerability in the `devcert` module may lead to remote code execution when users of the module pass untrusted input to the `certificateFor` function.

In Notion Web Clipper 1.0.3(7), a .nib file is susceptible to the Dirty NIB attack. NIB files can be manipulated to execute arbitrary commands. Additionally, even if a NIB file is modified within an application, Gatekeeper may still permit the execution of the application, enabling the execution of arbitrary commands within the application's context. NOTE: the vendor's perspective is that this is simply an instance of CVE-2022-48505, cannot properly be categorized as a product-level vulnerability, and cannot have a product-level fix because it is about incorrect caching of file signatures on macOS.

An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

An issue in Dlink DIR-816A2 v.1.10CNB05 allows a remote attacker to execute arbitrary code via the wizardstep4_ssid_2 parameter in the sub_42DA54 function.

Improper input validation in Citrix XenMobile Server 10.12 before RP3, Citrix XenMobile Server 10.11 before RP6, Citrix XenMobile Server 10.10 RP6 and Citrix XenMobile Server before 10.9 RP5 allows SQL Injection.

Zentao v18.0 to v18.10 was discovered to contain a remote code execution (RCE) vulnerability via the checkConnection method of /app/zentao/module/repo/model.php.

This command injection vulnerability in File Station allows attackers to execute commands on the affected device. To fix the vulnerability, QNAP recommend updating QTS to their latest versions.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

A vulnerability, which was classified as critical, has been found in 1Panel up to 1.10.1-lts. Affected by this issue is the function baseApi.UpdateDeviceSwap of the file /api/v1/toolbox/device/update/swap. The manipulation of the argument Path with the input 123123123\nopen -a Calculator leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-256304.

The package get-npm-package-version before 1.0.7 are vulnerable to Command Injection via main function in index.js.

Versions of the package network before 0.7.0 are vulnerable to Arbitrary Command Injection due to use of the child_process exec function without input sanitization. If (attacker-controlled) user input is given to the mac_address_for function of the package, it is possible for the attacker to execute arbitrary commands on the operating system that this package is being run on.

A Heap Overflow vulnerability in WLInfoRailService component of Ivanti Avalanche before 6.4.3 allows a remote unauthenticated attacker to execute arbitrary commands

An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network. Affected Products: UniFi Access Reader Pro (Version 2.14.21 and earlier) UniFi Access G2 Reader Pro (Version 1.10.32 and earlier) UniFi Access G3 Reader Pro (Version 1.10.30 and earlier) UniFi Access Intercom (Version 1.7.28 and earlier) UniFi Access G3 Intercom (Version 1.7.29 and earlier) UniFi Access Intercom Viewer (Version 1.3.20 and earlier) Mitigation: Update UniFi Access Reader Pro Version 2.15.9 or later Update UniFi Access G2 Reader Pro Version 1.11.23 or later Update UniFi Access G3 Reader Pro Version 1.11.22 or later Update UniFi Access Intercom Version 1.8.22 or later Update UniFi Access G3 Intercom Version 1.8.22 or later Update UniFi Access Intercom Viewer Version 1.4.39 or later

We have recently released new version of AirMax AirOS firmware v6.3.0 for TI, XW and XM boards that fixes vulnerabilities found on AirMax AirOS v6.2.0 and prior TI, XW and XM boards, according to the description below:There are certain end-points containing functionalities that are vulnerable to command injection. It is possible to craft an input string that passes the filter check but still contains commands, resulting in remote code execution.Mitigation:Update to the latest AirMax AirOS firmware version available at the AirMax download page.

An attacker may inject commands via specially-crafted post requests.