NVIDIA CUDA-Q contains a vulnerability in an endpoint, where an unauthenticated attacker could cause an out-of-bounds read by sending a maliciously crafted request. A successful exploit of this vulnerability might lead to denial of service and information disclosure.
GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10.
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1.
GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_wavparse_smpl_chunk function within gstwavparse.c. This function attempts to read 4 bytes from the data + 12 offset without checking if the size of the data buffer is sufficient. If the buffer is too small, the function reads beyond its bounds. This vulnerability may result in reading 4 bytes out of the boundaries of the data buffer. This vulnerability is fixed in 1.24.10.
libaspell.a in GNU Aspell before 0.60.8 has a stack-based buffer over-read in acommon::unescape in common/getdata.cpp via an isolated \ character.
GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10.
A buffer over-read was discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP packet header starting from the message token. The length of the token in the received message is provided in the first byte parsed by the sn_coap_parser_options_parse() function. The length encoded in the message is not validated against the actual input buffer length before accessing the token. As a result, memory access outside of the intended boundary of the buffer may occur.
Dual-Algorithm CertificateVerify out-of-bounds read. When processing a dual-algorithm CertificateVerify message, an out-of-bounds read can occur on crafted input. This can only occur when --enable-experimental and --enable-dual-alg-certs is used when building wolfSSL.
An issue was discovered in the fltk crate before 0.15.3 for Rust. There is an out-of bounds read because the pixmap constructor lacks pixmap input validation.
Improper validation of the length field of LLDP-MED TLV in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, allows information disclosure to attackers due to controllable loop counter variable via a crafted lldp packet.
In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_choice() In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */ When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end), which is false. The subsequent get_len() call then dereferences *bs->cur++, reading 1 byte past the end of the buffer. If that byte has bit 7 set, get_len() reads a second byte as well. This can be triggered remotely by sending a crafted Q.931 SETUP message with a User-User Information Element containing exactly 2 bytes of PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with the nf_conntrack_h323 helper active. The decoder fully consumes the PER buffer before reaching this code path, resulting in a 1-2 byte heap-buffer-overflow read confirmed by AddressSanitizer. Fix this by checking for 2 bytes (the maximum that get_len() may read) instead of the uninitialized `len`. This matches the pattern used at every other get_len() call site in the same file, where the caller checks for 2 bytes of available data before calling get_len().
The htmlParseTryOrFinish function in HTMLparser.c in libxml2 2.9.4 allows attackers to cause a denial of service (buffer over-read) or information disclosure.
There is an Improper verification vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause out-of-bounds read.
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.
An issue was discovered in the Linux kernel before 6.3.9. ksmbd does not validate the SMB request protocol ID, leading to an out-of-bounds read.
A missing bound check in RTCP flag parsing code prior to WhatsApp for Android v2.21.23.2, WhatsApp Business for Android v2.21.23.2, WhatsApp for iOS v2.21.230.6, WhatsApp Business for iOS 2.21.230.7, and WhatsApp Desktop v2.2145.0 could have allowed an out-of-bounds heap read if a user sent a malformed RTCP packet during an established call.
There is an Improper verification vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause out-of-bounds read.
Improper input validation vulnerability for processing SIB12 PDU in Exynos modems prior to SMR Sep-2022 Release allows remote attacker to read out of bounds memory.
In kernel/compat.c in the Linux kernel before 3.17, as used in Google Chrome OS and other products, there is a possible out-of-bounds read. restart_syscall uses uninitialized data when restarting compat_sys_nanosleep. NOTE: this is disputed because the code path is unreachable
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, global-buffer-overflow was observed in FreeRDP's Base64 decoding path. The root cause appears to be implementation-defined char signedness: on Arm/AArch64 builds, plain char is treated as unsigned, so the guard c <= 0 can be optimized into a simple c != 0 check. As a result, non-ASCII bytes (e.g., 0x80-0xFF) may bypass the intended range restriction and be used as an index into a global lookup table, causing out-of-bounds access. This vulnerability is fixed in 3.20.1.
An issue was discovered in Ollama before 0.1.46. An attacker can use two HTTP requests to upload a malformed GGUF file containing just 4 bytes starting with the GGUF custom magic header. By leveraging a custom Modelfile that includes a FROM statement pointing to the attacker-controlled blob file, the attacker can crash the application through the CreateModel route, leading to a segmentation fault (signal SIGSEGV: segmentation violation).
A heap-based buffer overflow was found in libwebp in versions before 1.0.1 in GetLE24().
An issue was discovered in app-layer-ssl.c in Suricata 4.1.4. Upon receiving a corrupted SSLv3 (TLS 1.2) packet, the parser function TLSDecodeHSHelloExtensions tries to access a memory region that is not allocated, because the expected length of HSHelloExtensions does not match the real length of the HSHelloExtensions part of the packet.
Potential buffer over-read due to lack of bound check of memory offset passed in WLAN firmware in Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in IPQ8074, MDM9206, MDM9207C, MDM9607, QCN7605, SM8150
In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.
Libarchive before 3.7.4 allows name out-of-bounds access when a ZIP archive has an empty-name file and mac-ext is enabled. This occurs in slurp_central_directory in archive_read_support_format_zip.c.
Multiple Read overflows issue due to improper length check while decoding 3G attach accept/ SMS/ pdn connection reject/ esm data transport/ bearer modify context reject in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8053, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9207C, MDM9607, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130
An XML External Entity (XXE) injection vulnerability in Intersec Geosafe-ea 2022.12, 2022.13, and 2022.14 allows attackers to perform arbitrary file reading under the privileges of the running process, make SSRF requests, or cause a Denial of Service (DoS) via unspecified vectors.
FFmpeg n6.1.1 has an Out-of-bounds Read via libavcodec/ppc/vp8dsp_altivec.c, static const vec_s8 h_subpel_filters_outer
An issue was discovered in libmodbus before 3.0.7 and 3.1.x before 3.1.5. There is an out-of-bounds read for the MODBUS_FC_WRITE_MULTIPLE_REGISTERS case, aka VD-1301.
ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer over-read vulnerability exists in the MAP image decoder when processing crafted MAP files, potentially leading to crashes or unintended memory disclosure during image decoding. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
HDF5 Library through 1.14.3 contains a out-of-bounds read operation in H5FL_arr_malloc in H5FL.c (called from H5S_set_extent_simple in H5S.c).
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the Crypto_AOS_ProcessSecurity function reads memory without valid bounds checking when parsing AOS frame hashes. This issue has been patched in version 1.4.3.
RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In version 2025.10 and prior, multiple out-of-bounds read allow any unauthenticated user, with ability to send or manipulate input packets, to read adjacent memory locations, or crash a vulnerable device running the 6LoWPAN stack. The received packet is cast into a sixlowpan_sfr_rfrag_t struct and dereferenced without validating the packet is large enough to contain the struct object. At time of publication, no known patch exists.
ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, the UIL and XPM image encoder do not validate the pixel index value returned by `GetPixelIndex()` before using it as an array subscript. In HDRI builds, `Quantum` is a floating-point type, so pixel index values can be negative. An attacker can craft an image with negative pixel index values to trigger a global buffer overflow read during conversion, leading to information disclosure or a process crash. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a heap out-of-bounds read occurs in the smartcard SetAttrib path when cbAttrLen does not match the actual NDR buffer length. This vulnerability is fixed in 3.20.1.
Versions of the package onnx before and including 1.15.0 are vulnerable to Out-of-bounds Read as the ONNX_ASSERT and ONNX_ASSERTM functions have an off by one string copy.
Out-of-bounds read in libimagecodec.quram.so prior to SMR Jan-2026 Release 1 allows remote attacker to access out-of-bounds memory.
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240314 have an out-of-bounds read in the stack-overflow handler in lj_state.c.
JFreeChart v1.5.4 was discovered to contain a NullPointerException via the component /chart/annotations/CategoryLineAnnotation. NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification.
Information Disclosure while parsing beacon frame in STA.
All versions of the package node-stringbuilder are vulnerable to Out-of-bounds Read due to incorrect memory length calculation, by calling ToBuffer, ToString, or CharAt on a StringBuilder object with a non-empty string value input. It's possible to return previously allocated memory, for example, by providing negative indexes, leading to an Information Disclosure.
An exploitable information leak/denial of service vulnerability exists in the libevm (Ethereum Virtual Machine) `create2` opcode handler of CPP-Ethereum. A specially crafted smart contract code can cause an out-of-bounds read leading to memory disclosure or denial of service. An attacker can create/send malicious a smart contract to trigger this vulnerability.
unrar 0.0.1 (aka unrar-free or unrar-gpl) suffers from a stack-based buffer over-read in unrarlib.c, related to ExtrFile and stricomp.
Out-of-bounds Read in GitHub repository gpac/gpac prior to 2.3-DEV.
An out-of-bounds read in the BGP daemon of FRRouting FRR before 8.4 may lead to a segmentation fault and denial of service. This occurs in bgp_capability_msg_parse in bgpd/bgp_packet.c.
Industrial Control Systems Network Protocol Parsers (ICSNPP) - Ethercat Zeek Plugin versions d78dda6 and prior are vulnerable to out-of-bounds read during the process of analyzing a specific Ethercat packet. This could allow an attacker to crash the Zeek process and leak some information in memory.
In wolfSSL prior to 5.6.6, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS client or network attacker can trigger a buffer over-read on the heap of 5 bytes (WOLFSSL_CALLBACKS is only intended for debugging).
TensorFlow is an open source platform for machine learning. The `GatherNd` function takes arguments that determine the sizes of inputs and outputs. If the inputs given are greater than or equal to the sizes of the outputs, an out-of-bounds memory read is triggered. This issue has been patched in GitHub commit 595a65a3e224a0362d7e68c2213acfc2b499a196. The fix will be included in TensorFlow 2.10.0. We will also cherrypick this commit on TensorFlow 2.9.1, TensorFlow 2.8.1, and TensorFlow 2.7.2, as these are also affected and still in supported range. There are no known workarounds for this issue.