Vulnerability in the CommandPost, Collector, and Sensor components of Fidelis Network and Deception enables an attacker with user level access to the CLI to inject root level commands into the component and neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

An low privileged remote attacker can execute OS commands with root privileges due to improper neutralization of special elements in user data.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

NeDi 1.9C is vulnerable to Remote Command Execution. System-Snapshot.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a psw parameter. (This can also be exploited via CSRF.)

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.

A vulnerability has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102 and classified as critical. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ipDoamin leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272596. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

ALGO 8180 IP Audio Alerter Web UI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28293.

Sme.UP ERP TOKYO V6R1M220406 was discovered to contain an OS command injection vulnerability via calls made to the XMService component.

EyesOfNetwork eonweb through 5.3-11 allows Remote Command Execution (by authenticated users) via shell metacharacters in the nagios_path parameter to lilac/export.php, as demonstrated by %26%26+curl to insert an "&& curl" substring for the shell.

A vulnerability was found in Alien Technology ALR-F800 up to 19.10.24.00. It has been declared as critical. Affected by this vulnerability is the function popen of the file /var/www/cgi-bin/upgrade.cgi of the component File Name Handler. The manipulation of the argument uploadedFile leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

Loadbalancer.org Enterprise VA MAX through 8.3.8 has an OS Command Injection vulnerability that allows a remote authenticated attacker to execute arbitrary code.

KLog Server through 2.4.1 allows authenticated command injection. async.php calls shell_exec() on the original value of the source parameter.

mailcow is a dockerized email package, with multiple containers linked in one bridged network. The Sync Job feature - which can be made available to standard users by assigning them the necessary permission - suffers from a shell command injection. A malicious user can abuse this vulnerability to obtain shell access to the Docker container running dovecot. The imapsync Perl script implements all the necessary functionality for this feature, including the XOAUTH2 authentication mechanism. This code path creates a shell command to call openssl. However, since different parts of the specified user password are included without any validation, one can simply execute additional shell commands. Notably, the default ACL for a newly-created mailcow account does not include the necessary permission. The Issue has been fixed within the 2023-03 Update (March 3rd 2023). As a temporary workaround the Syncjob ACL can be removed from all mailbox users, preventing from creating or changing existing Syncjobs.

SABnzbd 2.3.9 and 3.0.0Alpha2 has a command injection vulnerability in the web configuration interface that permits an authenticated user to execute arbitrary Python commands on the underlying operating system.

ALGO 8180 IP Audio Alerter Web UI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28321.

In QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8, the local www-data user can execute sudo mysql without a password, which means that the www-data user can execute arbitrary OS commands via the mysql -e option.

Pepperl+Fuchs Comtrol IO-Link Master in Version 1.5.48 and below is prone to an authenticated blind OS Command Injection.

LiteSpeed Web Server Enterprise 5.4.11 contains an authenticated command injection vulnerability in the external app configuration interface. Authenticated administrators can inject shell commands through the 'Command' parameter in the server configuration, allowing remote code execution via path traversal and bash command injection.

Poddycast is a podcast app made with Electron. Prior to version 0.8.1, an attacker can create a podcast or episode with malicious characters and execute commands on the client machine. The application does not clean the HTML characters of the podcast information obtained from the Feed, which allows the injection of HTML and JS code (cross-site scripting). Being an application made in electron, cross-site scripting can be scaled to remote code execution, making it possible to execute commands on the machine where the application is running. The vulnerability is patched in Poddycast version 0.8.1.

Centreon before 19.04.15 allows remote attackers to execute arbitrary OS commands by placing shell metacharacters in RRDdatabase_status_path (via a main.get.php request) and then visiting the include/views/graphs/graphStatus/displayServiceStatus.php page.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetmask0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

ZoneMinder is a free, open source Closed-circuit television software application for Linux which supports IP, USB and Analog cameras. Versions prior to 1.36.33 and 1.37.33 contain an OS Command Injection via daemonControl() in (/web/api/app/Controller/HostController.php). Any authenticated user can construct an api command to execute any shell command as the web user. This issue is patched in versions 1.36.33 and 1.37.33.

reNgine 2.2.0 contains a command injection vulnerability in the nmap_cmd parameter of scan engine configuration that allows authenticated attackers to execute arbitrary commands. Attackers can modify the nmap_cmd parameter with malicious base64-encoded payloads to achieve remote code execution during scan engine configuration.

An issue was discovered on Rittal PDU-3C002DEC through 5.15.40 and CMCIII-PU-9333E0FB through 3.15.70_4 devices. Attackers can execute code.

sendfax.php in iFAX AvantFAX before 3.3.6 and HylaFAX Enterprise Web Interface before 0.2.5 allows authenticated Command Injection.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

A vulnerability was found in Sapido BR270n, BRC76n, GR297 and RB1732 and classified as critical. Affected by this issue is some unknown functionality of the file ip/syscmd.htm. The manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214592.

VIVOTEK Network Cameras before XXXXX-VVTK-2.2002.xx.01x (and before XXXXX-VVTK-0XXXX_Beta2) allows an authenticated user to upload and execute a script (with resultant execution of OS commands). For example, this affects IT9388-HT devices.

Nextcloud server is an open source home cloud implementation. In affected versions a missing scope validation allowed users to create workflows which are designed to be only available for administrators. Some workflows are designed to be RCE by invoking defined scripts, in order to generate PDFs, invoking webhooks or running scripts on the server. Due to this combination depending on the available apps the issue can result in a RCE at the end. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. Users unable to upgrade should disable app `workflow_scripts` and `workflow_pdf_converter` as a mitigation.

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetwork0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

DKIM key management page vulnerability on Micro Focus Secure Messaging Gateway (SMG). Affecting all SMG Appliance running releases prior to July 2020. The vulnerability could allow a logged in user with rights to generate DKIM key information to inject system commands into the call to the DKIM system command.

Certain TP-Link devices allow Command Injection. This affects NC200 2.1.9 build 200225, NC210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 247632.

An issue was discovered in Titan SpamTitan 7.07. Improper validation of the parameter fname on the page certs-x.php would allow an attacker to execute remote code on the target server. The user has to be authenticated before interacting with this page.

An issue was discovered in Open-AudIT 3.2.2. There is OS Command injection in Discovery.

An issue was discovered in Open-AudIT 3.3.1. There is shell metacharacter injection via attributes to an open-audit/configuration/ URI. An attacker can exploit this by adding an excluded IP address to the global discovery settings (internally called exclude_ip). This exclude_ip value is passed to the exec function in the discoveries_helper.php file (inside the all_ip_list function) without being filtered, which means that the attacker can provide a payload instead of a valid IP address.

IntelMQ Manager from version 1.1.0 and before version 2.1.1 has a vulnerability where the backend incorrectly handled messages given by user-input in the "send" functionality of the Inspect-tool of the Monitor component. An attacker with access to the IntelMQ Manager could possibly use this issue to execute arbitrary code with the privileges of the webserver. Version 2.1.1 fixes the vulnerability.

lib/ajaxHandlers/ajaxAddTemplate.php in rConfig through 3.94 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the fileName POST parameter.

Comtrend VR-3033 DE11-416SSG-C01_R02.A2pvI042j1.d26m devices have Multiple Authenticated Command Injection vulnerabilities via the ping and traceroute diagnostic pages, as demonstrated by shell metacharacters in the pingIpAddress parameter to ping.cgi.

An issue was discovered in Froxlor before 0.10.14. Remote attackers with access to the installation routine could have executed arbitrary code via the database configuration options that were passed unescaped to exec, because of _backupExistingDatabase in install/lib/class.FroxlorInstall.php.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.