A deserialization vulnerability in a .NET framework class used and not properly checked by Flexi Soft Designer in all versions up to and including 1.9.4 SP1 allows an attacker to craft malicious project files. Opening/importing such a malicious project file would execute arbitrary code with the privileges of the current user when opened or imported by the Flexi Soft Designer. This compromises confidentiality integrity and availability. For the attack to succeed a user must manually open a malicious project file.

A vulnerability in the file opening process of Cisco Unified Contact Center Express (Unified CCX) Editor could allow an unauthenticated attacker to execute arbitrary code on an affected device.  This vulnerability is due to insecure deserialization of Java objects by the affected software. An attacker could exploit this vulnerability by persuading an authenticated, local user to open a crafted .aef file. A successful exploit could allow the attacker to execute arbitrary code on the host that is running the editor application with the privileges of the user who launched it.

Deserialization of Untrusted Data vulnerability in yolo 3 allows attackers to execute arbitrary code via crafted yaml file.

By launching the drb_remote_codeexec exploit, a Metasploit Framework user will inadvertently expose Metasploit to the same deserialization issue that is exploited by that module, due to the reliance on the vulnerable Distributed Ruby class functions. Since Metasploit Framework typically runs with elevated privileges, this can lead to a system compromise on the Metasploit workstation. Note that an attacker would have to lie in wait and entice the Metasploit user to run the affected module against a malicious endpoint in a "hack-back" type of attack. Metasploit is only vulnerable when the drb_remote_codeexec module is running. In most cases, this cannot happen automatically.

Pdfminer.six is a community maintained fork of the original PDFMiner, a tool for extracting information from PDF documents. Prior to version 20251107, pdfminer.six will execute arbitrary code from a malicious pickle file if provided with a malicious PDF file. The `CMapDB._load_data()` function in pdfminer.six uses `pickle.loads()` to deserialize pickle files. These pickle files are supposed to be part of the pdfminer.six distribution stored in the `cmap/` directory, but a malicious PDF can specify an alternative directory and filename as long as the filename ends in `.pickle.gz`. A malicious, zipped pickle file can then contain code which will automatically execute when the PDF is processed. Version 20251107 fixes the issue.

PHPMailer before 5.2.27 and 6.x before 6.0.6 is vulnerable to an object injection attack.

cryptidy through 1.2.4 allows code execution via untrusted data because pickle.loads is used. This occurs in aes_decrypt_message in symmetric_encryption.py.

A safe mode bypass vulnerability in the `Model.load_model` method in Keras versions 3.0.0 through 3.10.0 allows an attacker to achieve arbitrary code execution by convincing a user to load a specially crafted `.keras` model archive.

Fuji Electric FRENIC-Loader 4 is vulnerable to a deserialization of untrusted data when importing a file through a specified window, which may allow an attacker to execute arbitrary code.

A vulnerability in the FAISS.deserialize_from_bytes function of langchain-ai/langchain allows for pickle deserialization of untrusted data. This can lead to the execution of arbitrary commands via the os.system function. The issue affects the latest version of the product.

LMDeploy is a toolkit for compressing, deploying, and serving LLMs. Prior to version 0.11.1, an insecure deserialization vulnerability exists in lmdeploy where torch.load() is called without the weights_only=True parameter when loading model checkpoint files. This allows an attacker to execute arbitrary code on the victim's machine when they load a malicious .bin or .pt model file. This issue has been patched in version 0.11.1.

Deserialization of untrusted data can occur in versions 2.4.0 or newer of the Cleanlab project, enabling a maliciously crafted datalab.pkl file to run arbitrary code on an end user’s system when the data directory is loaded.

In onReceive of AppRestrictionsFragment.java, there is a possible escalation of privilege due to unsafe deserialization. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.

In Progress® Telerik® Reporting versions prior to 2024 Q2 (18.1.24.2.514), a code execution attack is possible by a local threat actor through an insecure deserialization vulnerability.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 2.5.0 or newer, enabling a maliciously uploaded Langchain AgentExecutor model to run arbitrary code on an end user’s system when interacted with.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 1.1.0 or newer, enabling a maliciously uploaded scikit-learn model to run arbitrary code on an end user’s system when interacted with.

Deserialization of untrusted data can occur in versions 0.6 or newer of the skops python library, enabling a maliciously crafted model to run arbitrary code on an end user's system when loaded.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 0.5.0 or newer, enabling a maliciously uploaded PyTorch model to run arbitrary code on an end user’s system when interacted with.

Deserialization of Untrusted Data vulnerability in sbouey Falang multilanguage falang allows Object Injection.This issue affects Falang multilanguage: from n/a through <= 1.3.65.

Deserialization of untrusted data can occur in versions 3.7.0 or newer of Ydata's ydata-profiling open-source library, enabling a malicously crafted report to run arbitrary code on an end user's system when loaded.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 0.9.0 or newer, enabling a maliciously uploaded PyFunc model to run arbitrary code on an end user’s system when interacted with.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 1.27.0 or newer, enabling a maliciously crafted Recipe to execute arbitrary code on an end user’s system when run.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 1.1.0 or newer, enabling a maliciously uploaded scikit-learn model to run arbitrary code on an end user’s system when interacted with.

Deserialization of untrusted data can occur in versions of the MLflow platform running version 1.24.0 or newer, enabling a maliciously uploaded pmdarima model to run arbitrary code on an end user’s system when interacted with.

There is a vulnerability in AVEVA PI Asset Framework Client that could allow malicious code to execute on the PI System Explorer environment under the privileges of an interactive user that was socially engineered to import XML supplied by an attacker.

MONAI (Medical Open Network for AI) is an AI toolkit for health care imaging. In versions up to and including 1.5.0, the `pickle_operations` function in `monai/data/utils.py` automatically handles dictionary key-value pairs ending with a specific suffix and deserializes them using `pickle.loads()` . This function also lacks any security measures. The deserialization may lead to code execution. As of time of publication, no known fixed versions are available.

A vulnerability has been identified in SIMATIC S7-PLCSIM V17 (All versions), SIMATIC STEP 7 V17 (All versions < V17 Update 9), SIMATIC STEP 7 V18 (All versions), SIMATIC STEP 7 V19 (All versions < V19 Update 4), SIMATIC STEP 7 V20 (All versions < V20 Update 4), SIMATIC WinCC V17 (All versions < V17 Update 9), SIMATIC WinCC V18 (All versions), SIMATIC WinCC V19 (All versions < V19 Update 4), SIMATIC WinCC V20 (All versions < V20 Update 4), SIMOCODE ES V17 (All versions), SIMOCODE ES V18 (All versions), SIMOCODE ES V19 (All versions), SIMOCODE ES V20 (All versions), SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SIMOTION SCOUT TIA V5.7 (All versions), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SINAMICS Startdrive V19 (All versions), SINAMICS Startdrive V20 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Safety ES V19 (TIA Portal) (All versions), SIRIUS Safety ES V20 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V19 (TIA Portal) (All versions), SIRIUS Soft Starter ES V20 (TIA Portal) (All versions), TIA Portal Cloud V17 (All versions), TIA Portal Cloud V18 (All versions), TIA Portal Cloud V19 (All versions < V5.2.1.1), TIA Portal Cloud V20 (All versions < V5.2.2.2). Affected products do not properly sanitize stored security properties when parsing project files. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application.

A CWE-502: Deserialization of Untrusted Data vulnerability exists in the Dashboard module that could cause an interpretation of malicious payload data, potentially leading to remote code execution when an attacker gets the user to open a malicious file.

Deserialization of untrusted data in Microsoft Office SharePoint allows an unauthorized attacker to execute code locally.

Datart 1.0.0-rc.3 is vulnerable to Directory Traversal. The configuration file handling of the application allows attackers to upload arbitrary YAML files to the config/jdbc-driver-ext.yml path. The application parses this file using SnakeYAML's unsafe load() or loadAs() method without input sanitization. This allows deserialization of attacker-controlled YAML content, leading to arbitrary class instantiation. Under certain conditions, this can be exploited to achieve remote code execution (RCE).

A CWE-502: Deserialization of Untrusted Data vulnerability exists in the Dashboard module that could cause an interpretation of malicious payload data, potentially leading to remote code execution when an attacker gets the user to open a malicious file. Affected Products: IGSS Data Server(IGSSdataServer.exe)(V16.0.0.23040 and prior), IGSS Dashboard(DashBoard.exe)(V16.0.0.23040 and prior), Custom Reports(RMS16.dll)(V16.0.0.23040 and prior).

Delta Electronics DTM Soft Project File Parsing Deserialization of Untrusted Data Remote Code Execution

Microsoft Excel Security Feature Bypass Vulnerability

sagemaker-python-sdk is a library for training and deploying machine learning models on Amazon SageMaker. The sagemaker.base_deserializers.NumpyDeserializer module before v2.218.0 allows potentially unsafe deserialization when untrusted data is passed as pickled object arrays. This consequently may allow an unprivileged third party to cause remote code execution, denial of service, affecting both confidentiality and integrity. Users are advised to upgrade to version 2.218.0. Users unable to upgrade should not pass pickled numpy object arrays which originated from an untrusted source, or that could have been tampered with. Only pass pickled numpy object arrays from trusted sources.

Delta Electronics DTN Soft Project File Parsing Deserialization of Untrusted Data Remote Code Execution

ADB Explorer is a fluent UI for ADB on Windows. Prior to Beta 0.9.26020, ADB Explorer is vulnerable to Insecure Deserialization leading to Remote Code Execution. The application attempts to deserialize the App.txt settings file using Newtonsoft.Json with TypeNameHandling set to Objects. This allows an attacker to supply a crafted JSON file containing a gadget chain (e.g., ObjectDataProvider) to execute arbitrary code when the application launches and subsequently saves its settings. This vulnerability is fixed in Beta 0.9.26020.

Visual Studio Code Remote Code Execution Vulnerability

ToolboxST prior to version 7.10 is affected by a deserialization vulnerability. An attacker with local access to an HMI or who has conducted a social engineering attack on an authorized operator could execute code in a Toolbox user's context through the deserialization of an untrusted configuration file. Two CVSS scores have been provided to capture the differences between the two aforementioned attack vectors.  Customers are advised to update to ToolboxST 7.10 which can be found in ControlST 7.10. If unable to update at this time customers should ensure they are following the guidance laid out in GE Gas Power's Secure Deployment Guide (GEH-6839). Customers should ensure they are not running ToolboxST as an Administrative user. 

A vulnerability has been identified in SIMATIC S7-PLCSIM V16 (All versions), SIMATIC S7-PLCSIM V17 (All versions), SIMATIC STEP 7 Safety V16 (All versions), SIMATIC STEP 7 Safety V17 (All versions < V17 Update 9), SIMATIC STEP 7 Safety V18 (All versions), SIMATIC STEP 7 Safety V19 (All versions < V19 Update 4), SIMATIC STEP 7 V16 (All versions), SIMATIC STEP 7 V17 (All versions < V17 Update 9), SIMATIC STEP 7 V18 (All versions), SIMATIC STEP 7 V19 (All versions < V19 Update 4), SIMATIC WinCC Unified V16 (All versions), SIMATIC WinCC Unified V17 (All versions < V17 Update 9), SIMATIC WinCC Unified V18 (All versions), SIMATIC WinCC Unified V19 (All versions < V19 Update 4), SIMATIC WinCC V16 (All versions), SIMATIC WinCC V17 (All versions < V17 Update 9), SIMATIC WinCC V18 (All versions), SIMATIC WinCC V19 (All versions < V19 Update 4), SIMOCODE ES V16 (All versions), SIMOCODE ES V17 (All versions), SIMOCODE ES V18 (All versions), SIMOCODE ES V19 (All versions), SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SINAMICS Startdrive V16 (All versions), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SINAMICS Startdrive V19 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Safety ES V19 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V19 (TIA Portal) (All versions), TIA Portal Cloud V16 (All versions), TIA Portal Cloud V17 (All versions), TIA Portal Cloud V18 (All versions), TIA Portal Cloud V19 (All versions < V5.2.1.1). Affected products do not properly sanitize user-controllable input when parsing log files. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application.

OperaMasks SDK ELite Script Engine v0.5.0 was discovered to contain a deserialization vulnerability.

A vulnerability has been identified in SIMATIC PCS neo V4.0 (All versions), SIMATIC STEP 7 V16 (All versions), SIMATIC STEP 7 V17 (All versions), SIMATIC STEP 7 V18 (All versions < V18 Update 2). Affected applications do not properly restrict the .NET BinaryFormatter when deserializing user-controllable input. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application. This is the same issue that exists for .NET BinaryFormatter https://docs.microsoft.com/en-us/visualstudio/code-quality/ca2300.

Deserialization of untrusted data in Microsoft Office allows an unauthorized attacker to elevate privileges locally.

A remote code execution vulnerability exists in "Microsoft COM for Windows" when it fails to properly handle serialized objects, aka "Microsoft COM for Windows Remote Code Execution Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.

IBM InfoSphere Information Server 11.3, 11.5, and 11.7 could allow a remote attacker to execute arbitrary code on the system, caused by the deserialization of untrusted data. By persuading a victim to visit a specially crafted Web site, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 176677.

LLama Factory enables fine-tuning of large language models. Prior to version 1.0.0, a critical vulnerability exists in the `llamafy_baichuan2.py` script of the LLaMA-Factory project. The script performs insecure deserialization using `torch.load()` on user-supplied `.bin` files from an input directory. An attacker can exploit this behavior by crafting a malicious `.bin` file that executes arbitrary commands during deserialization. This issue has been patched in version 1.0.0.

FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to org.apache.tomcat.dbcp.dbcp2.datasources.PerUserPoolDataSource.

An unauthenticated attacker can trick a local user into executing arbitrary code by opening a deliberately manipulated CODESYS project file with a CODESYS development system. This arbitrary code is executed in the user context.

An unauthenticated attacker can trick a local user into executing arbitrary commands by opening a deliberately manipulated project file with an affected engineering tool. These arbitrary commands are executed in the user context.

NVIDIA NVTabular for Linux contains a vulnerability in the Workflow component, where a user could cause a deserialization issue. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.

NVIDIA Merlin Transformers4Rec for Linux contains a vulnerability in the Trainer component, where a user could cause a deserialization issue. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.