A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-LogoffUser instruction prior V21.1. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Nomad-GetCmContentLocations instruction prior V19.2. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-FindFileBySizeAndHash instruction prior V21.1. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-DevicesListeningOnAPort instruction prior V21. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-ConfigMgrConsoleExtensions instructions. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Nomad-PauseNomadJobQueue instruction prior V25. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Explorer-TachyonCore-CheckSimpleIoC instruction. Improper input validation, allowing authenticated attackers with Actioner privileges to inject arbitrary commands. Exploitation enables remote execution of elevated commands on devices connected to the platform.

A command injection vulnerability was discovered in TeamViewer DEX (former 1E DEX), specifically within the 1E-Nomad-RunPkgStatusRequest instruction. Improper input validation allows authenticated attackers with actioner privilege to run elevated arbitrary commands on connected hosts via malicious commands injected into the instruction’s input field. Users of 1E Client version 24.5 or higher are not affected.

Improper access control in the TeamViewer Full and Host clients (Windows, macOS, Linux) prior version 15.74.5 allows an authenticated user to bypass additional access controls with “Allow after confirmation” configuration in a remote session. An exploit could result in unauthorized access prior to local confirmation. The user needs to be authenticated for the remote session via ID/password, Session Link, or Easy Access as a prerequisite to exploit this vulnerability.

A vulnerability in TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 25.11 for Windows allows malicious actors to cause a denial of service (application crash) via a crafted command, resulting in service termination.

A vulnerability in TeamViewer DEX Client (former 1E client) - Content Distribution Service (NomadBranch.exe) prior version 25.11 for Windows allows malicious actors to bypass file integrity validation via a crafted request. By providing a valid hash for a malicious file, an attacker can cause the service to incorrectly validate and process the file as trusted, enabling arbitrary code execution under the Nomad Branch service context.

A vulnerability in TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 25.11 for Windows allows malicious actors to coerce the service into transmitting data to an arbitrary internal IP address, potentially leaking sensitive information.

A command injection vulnerability was discovered in TeamViewer DEX Platform On-Premises (former 1E DEX Platform On-Premises) prior to version 9.2. Improper input validation allows authenticated users with at least questioner privileges to inject commands in specific instructions. Exploitation could lead to execution of elevated commands on devices connected to the platform.

A missing validation of a user-controlled value in the TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 26.1 for Windows allows an adjacent network attacker to tamper with log timestamps via crafted UDP Sync command. This could result in forged or nonsensical datetime prefixes and compromising log integrity and forensic correlation.

A vulnerability in TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 26.1 for Windows allows an attacker on the adjacent network to inject, tamper with, or forge log entries in \Nomad Branch.log via crafted data sent to the UDP network handler. This can impact log integrity and nonrepudiation.

The webserver in Delta DX-3021 versions prior to 1.24 is vulnerable to command injection through the network diagnosis page. This vulnerability could allow a remote unauthenticated user to add files, delete files, and change file permissions.

Alotcer - AR7088H-A firmware version 16.10.3 Command execution Improper validation of unspecified input field may allow Authenticated command execution.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

IBM QRadar SIEM 7.4 and 7.5 is vulnerable to privilege escalation, allowing a user with some admin capabilities to gain additional admin capabilities. IBM X-Force ID: 239425.

An issue was discovered in GTB Central Console 15.17.1-30814.NG. The method systemSettingsDnsDataAction at /opt/webapp/src/AppBundle/Controller/React/SystemSettingsController.php is vulnerable to command injection via the /old/react/v1/api/system/dns/data endpoint. An authenticated attacker can abuse it to inject an arbitrary command and compromise the platform.

Zoho ManageEngine ServiceDesk Plus versions 13010 and prior are vulnerable to authenticated command injection. This can be exploited by high-privileged users.

A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.

Microsoft Defender for IoT Remote Code Execution Vulnerability

This affects versions of the package opencart/opencart from 4.0.0.0. An Arbitrary File Creation issue was identified via the database restoration functionality. By injecting PHP code into the database, an attacker with admin privileges can create a backup file with an arbitrary filename (including the extension), within /system/storage/backup. **Note:** It is less likely for the created file to be available within the web root, as part of the security recommendations for the application suggest moving the storage path outside of the web root.

A command injection vulnerability could allow an authenticated user to execute operating system commands as root via a specially crafted API request.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability via the url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Enphase) allows OS Command Injection.This issue affects Envoy: 4.x <= 7.x

An administrative user with access to configure webhooks can execute arbitrary commands by configuring and then triggering webhooks containing specific FreeMarker template syntax.  This issue affects all MongoDB Ops Manager 7.0 versions and MongoDB Ops Manager versions 8.0.22 and prior.

A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A buffer overflow vulnerability exists in the ONVIF GetStreamUri function of LSC Indoor Camera V7.6.32. The application fails to validate the length of the Protocol parameter inside the Transport element. By sending a specially crafted SOAP request containing an oversized protocol string, an attacker can overflow the stack buffer, overwriting the return instruction pointer (RIP). This vulnerability allows for Denial of Service (DoS) via device crash or Remote Code Execution (RCE) in the context of the ONVIF service.

A remote command injection issues exists in the web server of the Kratos SpectralNet device with SpectralNet Narrowband (NB) before 1.7.5. As an admin user, an attacker can send a crafted password in order to execute Linux commands as the root user.

A vulnerability in the web-based management interface of the Cisco WAP371 Wireless-AC/N Dual Radio Access Point (AP) with Single Point Setup could allow an authenticated, remote attacker to perform command injection attacks against an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit this vulnerability, the attacker must have valid administrative credentials for the device.

Zoho ManageEngine ADManager Plus through 7151 allows authenticated admin users to execute the commands in proxy settings.

A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

In battery, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08488849; Issue ID: ALPS08488849.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

A vulnerability, which was classified as critical, was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. Affected is an unknown function of the file /admin/network/diag_nslookup. The manipulation of the argument diag_nslookup leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper Input Validation of plugin files in Administrator Interface of Secomea GateManager allows a server administrator to inject code into the GateManager interface. This issue affects: Secomea GateManager versions prior to 10.0.

A vulnerability in the Redfish API of Cisco UCS B-Series, Cisco UCS Managed C-Series, and Cisco UCS X-Series Servers could allow an authenticated, remote attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root. This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending crafted commands through the Redfish API on an affected device. A successful exploit could allow the attacker to elevate privileges to root.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

A vulnerability exists in the SecOps SOAR server. The custom integrations feature allowed an authenticated user with an "IDE role" to achieve Remote Code Execution (RCE) in the server. The flaw stemmed from weak validation of uploaded Python package code. An attacker could upload a package containing a malicious setup.py file, which would execute on the server during the installation process, leading to potential server compromise. No customer action is required. All customers have been automatically upgraded to the fixed version: 6.3.64 or higher.

IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034.

The lack of nested page table protection in the AMD SEV/SEV-ES feature could potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution.

Improper input validation in the Wazuh agent for Windows prior to version 4.8.0 allows an attacker with control over the Wazuh server or agent key to configure the agent to connect to a malicious UNC path. This results in the leakage of the machine account NetNTLMv2 hash, which can be relayed for remote code execution or used to escalate privileges to SYSTEM via AD CS certificate forging and other similar attacks.

There is command injection in the meshd program in the routing system, resulting in command execution under administrator authority on Xiaomi router AX3600 with ROM version =< 1.1.12

An improper input insertion vulnerability in AiCloud on certain router models may lead to arbitrary command execution. Refer to the '01/02/2025 ASUS Router AiCloud vulnerability' section on the ASUS Security Advisory for more information.

A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.