In the HDF5 1.8.16 library's failure to check if the number of dimensions for an array read from the file is within the bounds of the space allocated for it, a heap-based buffer overflow will occur, potentially leading to arbitrary code execution.

HDF5 Library through 1.14.3 contains a heap-based buffer overflow in H5T__ref_mem_setnull in H5Tref.c (called from H5T__conv_ref in H5Tconv.c), resulting in the corruption of the instruction pointer.

HDF5 through 1.14.3 contains a heap buffer overflow in H5A__attr_release_table, resulting in the corruption of the instruction pointer and causing denial of service or potential code execution.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]

Kernel Streaming WOW Thunk Service Driver Elevation of Privilege Vulnerability

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() If authblob->SessionKey.Length is bigger than session key size(CIFS_KEY_SIZE), slub overflow can happen in key exchange codes. cifs_arc4_crypt copy to session key array from SessionKey from client.

Windows Ancillary Function Driver for WinSock Elevation of Privilege Vulnerability

In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]

Windows Graphics Component Elevation of Privilege Vulnerability

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds in init_smb2_rsp_hdr() If client send smb2 negotiate request and then send smb1 negotiate request, init_smb2_rsp_hdr is called for smb1 negotiate request since need_neg is set to false. This patch ignore smb1 packets after ->need_neg is set to false.

Huawei Matebook D16(Model: CREM-WXX9, BIOS: v2.26) Arbitrary Memory Corruption in SMI Handler of ThisiServicesSmm SMM module. This can be leveraged by a malicious OS attacker to corrupt arbitrary SMRAM memory and, in turn, lead to code execution in SMM

A vulnerability was determined in OSGeo gdal up to 3.13.0dev-4. This vulnerability affects the function memmove of the file frmts/hdf4/hdf-eos/SWapi.c of the component HDF-EOS Grid File Handler. This manipulation causes out-of-bounds read. The attack is restricted to local execution. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.13.0RC1 is able to resolve this issue. Patch name: a791f70f8eaec540974ec989ca6fb00266b7646c. Upgrading the affected component is advised.

A weakness has been identified in OSGeo gdal up to 3.13.0dev-4. The affected element is the function GDfieldinfo of the file frmts/hdf4/hdf-eos/GDapi.c. Executing a manipulation can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. Upgrading to version 3.13.0RC1 is sufficient to fix this issue. This patch is called a791f70f8eaec540974ec989ca6fb00266b7646c. The affected component should be upgraded.

In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00441509; Issue ID: MSV-4138.

An invalid memory write issue in Jasper-Software Jasper v.4.1.1 and before allows a local attacker to execute arbitrary code.

In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00435349; Issue ID: MSV-4051.

In wlan STA driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00447115; Issue ID: MSV-4276.

Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavfilter/af_stereowiden.c:120:69.

A vulnerability was found in SourceCodester Telecom Billing Management System 1.0. It has been rated as critical. This issue affects the function addrecords of the file main.cpp of the component Add New Record. The manipulation of the argument name/phonenumber leads to buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

A vulnerability was found in AcademySoftwareFoundation OpenColorIO up to 2.5.0. This issue affects the function ConvertToRegularExpression of the file src/OpenColorIO/FileRules.cpp. Performing a manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named ebdbb75123c9d5f4643e041314e2bc988a13f20d. To fix this issue, it is recommended to deploy a patch. The fix was added to the 2.5.1 milestone.

A vulnerability was found in PX4 PX4-Autopilot up to 1.16.0. Affected by this issue is the function MavlinkLogHandler::state_listing/MavlinkLogHandler::log_entry_from_id of the file src/modules/mavlink/mavlink_log_handler.cpp. The manipulation results in stack-based buffer overflow. The attack is only possible with local access. The patch is identified as 338595edd1d235efd885fd5e9f45e7f9dcf4013d. It is best practice to apply a patch to resolve this issue.

A security vulnerability has been detected in WebAssembly wabt up to 1.0.39. This issue affects the function wabt::Decompiler::VarName of the file /src/repro/wabt/bin/wasm-decompile of the component wasm-decompile. Such manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Unfortunately, the project has no active maintainer at the moment. In a reply to the issue report somebody recommended to the researcher to provide a PR himself.

A vulnerability was detected in wasm3 up to 0.5.0. Impacted is the function op_SetSlot_i32/op_CallIndirect of the file m3_exec.h. Performing a manipulation results in memory corruption. The attack needs to be approached locally. The exploit is now public and may be used. Unfortunately, the project has no active maintainer at the moment.

A security flaw has been discovered in OSGeo gdal up to 3.13.0dev-4. Impacted is the function GDnentries of the file frmts/hdf4/hdf-eos/GDapi.c. Performing a manipulation of the argument DataFieldName results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 3.13.0RC1 is recommended to address this issue. The patch is named 184f77dbcc74118c062c05e464c88161d3c37b9b. You should upgrade the affected component.

A weakness has been identified in WebAssembly wabt up to 1.0.39. This vulnerability affects the function wabt::AST::InsertNode of the file /src/repro/wabt/bin/wasm-decompile of the component wasm-decompile. This manipulation causes memory corruption. It is possible to launch the attack on the local host. The exploit has been made available to the public and could be used for attacks. Unfortunately, the project has no active maintainer at the moment. In a reply to the issue report somebody recommended to the researcher to provide a PR himself.

Buffer overflow vulnerability in Explorer++ affecting version 1.3.5.531. A local attacker could execute arbitrary code via a long filename argument by monitoring Structured Exception Handler (SEH) records.

A security flaw has been discovered in floooh sokol up to 33e2271c431bf21de001e972f72da17a984da932. This vulnerability affects the function _sg_pipeline_common_init in the library sokol_gfx.h. Performing manipulation results in heap-based buffer overflow. The attack needs to be approached locally. The exploit has been released to the public and may be exploited. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The patch is named 33e2271c431bf21de001e972f72da17a984da932. It is suggested to install a patch to address this issue.

Memory Corruption in IMS while calling VoLTE Streamingmedia Interface

A vulnerability was identified in OSGeo gdal up to 3.13.0dev-4. This issue affects the function SWnentries of the file frmts/hdf4/hdf-eos/SWapi.c. Such manipulation of the argument DimensionName leads to heap-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. Upgrading to version 3.12.4RC1 is capable of addressing this issue. The name of the patch is 9491e794f1757f08063ea2f7a274ad2994afa636. It is advisable to upgrade the affected component.

A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.

A vulnerability, which was classified as problematic, was found in radare2 5.9.9 33286. Affected is an unknown function in the library /libr/main/rasm2.c of the component rasm2. The manipulation leads to memory corruption. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. Upgrading to version 6.0.0 is able to address this issue. The patch is identified as c6c772d2eab692ce7ada5a4227afd50c355ad545. It is recommended to upgrade the affected component.

A security vulnerability has been detected in jarun nnn up to 5.1. The impacted element is the function show_content_in_floating_window/run_cmd_as_plugin of the file nnn/src/nnn.c. The manipulation leads to double free. An attack has to be approached locally. The identifier of the patch is 2f07ccdf21e705377862e5f9dfa31e1694979ac7. It is suggested to install a patch to address this issue.

A vulnerability was found in MicroWord eScan Antivirus 7.0.32 on Linux and classified as critical. Affected by this issue is the function strcpy of the component VirusPopUp. The manipulation leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in GNU elfutils 0.192. This affects the function process_symtab of the file readelf.c of the component eu-readelf. The manipulation of the argument D/a leads to buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5e5c0394d82c53e97750fe7b18023e6f84157b81. It is recommended to apply a patch to fix this issue.

A vulnerability classified as problematic was found in vim up to 9.1.1096. This vulnerability affects unknown code of the file src/main.c. The manipulation of the argument --log leads to memory corruption. It is possible to launch the attack on the local host. Upgrading to version 9.1.1097 is able to address this issue. The patch is identified as c5654b84480822817bb7b69ebc97c174c91185e9. It is recommended to upgrade the affected component.

An out-of-bounds write flaw was found in grub2's NTFS filesystem driver. This issue may allow an attacker to present a specially crafted NTFS filesystem image, leading to grub's heap metadata corruption. In some circumstances, the attack may also corrupt the UEFI firmware heap metadata. As a result, arbitrary code execution and secure boot protection bypass may be achieved.

Improper buffer restrictions in Intel(R) Media SDK software all versions may allow an authenticated user to potentially enable denial of service via local access.

A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.

A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.

While handling the vendor command there is an integer truncation issue that could yield a buffer overflow due to int data type copied to u8 data type in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile in APQ8096AU, MSM8996AU, QCA6574AU, QCN7605, Rennell, SC8180X, SDM710, SDX55, SM7150, SM8150, SM8250, SXR2130

NVIDIA Virtual GPU Manager contains a vulnerability in the vGPU plugin, in which the software does not restrict or incorrectly restricts operations within the boundaries of a resource that is accessed by using an index or pointer, such as memory or files, which may lead to code execution, denial of service, escalation of privileges, or information disclosure. This affects vGPU version 8.x (prior to 8.4), version 9.x (prior to 9.4) and version 10.x (prior to 10.3).

Improper buffer restrictions in Intel(R) Media SDK all versions may allow an authenticated user to potentially enable escalation of privilege via local access.

Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in Arm Ltd Bifrost GPU Userspace Driver, Arm Ltd Valhall GPU Userspace Driver, Arm Ltd Arm 5th Gen GPU Architecture Userspace Driver allows a non-privileged user process to perform valid GPU processing operations, including via WebGL or WebGPU, to access outside of buffer bounds.This issue affects Bifrost GPU Userspace Driver: from r18p0 through r49p3, from r50p0 through r51p0; Valhall GPU Userspace Driver: from r28p0 through r49p3, from r50p0 through r54p0; Arm 5th Gen GPU Architecture Userspace Driver: from r41p0 through r49p3, from r50p0 through r54p0.

IBM AIX 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the invscout command to execute arbitrary commands. IBM X-Force ID: 267966.

A vulnerability was found in libX11 due to an integer overflow within the XCreateImage() function. This flaw allows a local user to trigger an integer overflow and execute arbitrary code with elevated privileges.

In convertYUV420Planar16ToY410 of ColorConverter.cpp, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

A weakness has been identified in QuickJS up to eb2c89087def1829ed99630cb14b549d7a98408c. This affects the function js_array_buffer_slice of the file quickjs.c. This manipulation causes buffer over-read. The attack is restricted to local execution. The exploit has been made available to the public and could be exploited. This product adopts a rolling release strategy to maintain continuous delivery Patch name: c6fe5a98fd3ef3b7064e6e0145dfebfe12449fea. To fix this issue, it is recommended to deploy a patch.

IBM Concert 1.0.0 through 2.1.0 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system.