telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full.
A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It's basically trusted input or input that needs an actual security flaw to be compromised or controlled.
xterm before 380 supports ReGIS reporting for character-set names even if they have unexpected characters (i.e., neither alphanumeric nor underscore), aka a pointer/overflow issue. This can only occur for xterm installations that are configured at compile time to use a certain experimental feature.
xterm before Patch #366 allows remote attackers to execute arbitrary code or cause a denial of service (segmentation fault) via a crafted UTF-8 combining character sequence.
telnetd in GNU Inetutils through 2.7 allows remote authentication bypass via a "-f root" value for the USER environment variable.
MAWK 1.3.3-17 and prior contains a stack-based buffer overflow vulnerability that allows attackers to execute arbitrary code by exploiting inadequate boundary checks on user-supplied input. Attackers can craft malicious input that overflows the stack buffer and execute a return-oriented programming chain to spawn a shell with application privileges.
xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.
libpspp-core.a in GNU PSPP through 2.0.1 allows attackers to cause a heap-based buffer overflow in inflate_read (called indirectly from zip_member_read_all) in zip-reader.c.
libpspp-core.a in GNU PSPP through 2.0.1 allows attackers to cause a heap-based buffer overflow in inflate_read (called indirectly from spv_read_xml_member) in zip-reader.c.
GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.
Stack-based buffer overflow in the HTrjis function in Lynx 2.8.6 and earlier allows remote NNTP servers to execute arbitrary code via certain article headers containing Asian characters that cause Lynx to add extra escape (ESC) characters.
A vulnerability has been found in GNU Binutils 2.43 and classified as problematic. Affected by this vulnerability is the function __sanitizer::internal_strlen of the file binutils/nm.c of the component nm. The manipulation of the argument const leads to buffer overflow. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as problematic, was found in GNU Binutils up to 2.43. This affects the function disassemble_bytes of the file binutils/objdump.c. The manipulation of the argument buf leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.44 is able to address this issue. The identifier of the patch is baac6c221e9d69335bf41366a1c7d87d8ab2f893. It is recommended to upgrade the affected component.
A vulnerability has been found in GNU ncurses up to 6.5-20250322 and classified as problematic. This vulnerability affects the function postprocess_termcap of the file tinfo/parse_entry.c. The manipulation leads to stack-based buffer overflow. The attack needs to be approached locally. Upgrading to version 6.5-20250329 is able to address this issue. It is recommended to upgrade the affected component.
A vulnerability, which was classified as critical, has been found in GNU cflow up to 1.8. Affected by this issue is the function yylex of the file c.c of the component Lexer. The manipulation leads to buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used.
A vulnerability was found in GNU elfutils 0.192. It has been declared as critical. Affected by this vulnerability is the function dump_data_section/print_string_section of the file readelf.c of the component eu-readelf. The manipulation of the argument z/x leads to buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is 73db9d2021cab9e23fd734b0a76a612d52a6f1db. It is recommended to apply a patch to fix this issue.
xterm through Patch 370, when Sixel support is enabled, allows attackers to trigger a buffer overflow in set_sixel in graphics_sixel.c via crafted text.
A vulnerability, which was classified as critical, was found in GNU elfutils 0.192. This affects the function process_symtab of the file readelf.c of the component eu-readelf. The manipulation of the argument D/a leads to buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5e5c0394d82c53e97750fe7b18023e6f84157b81. It is recommended to apply a patch to fix this issue.
Kofax Power PDF GIF File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GIF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20373.
A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited.
LAquis SCADA Versions 4.1.0.3870 and prior has several stack-based buffer overflow vulnerabilities, which may allow remote code execution.
Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.
A vulnerability has been found in Tenda AC8 16.03.34.06. This impacts an unknown function of the file /goform/DatabaseIniSet. The manipulation of the argument Time leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was identified in Tenda AC21 16.03.08.16. This vulnerability affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg. The manipulation of the argument startIp leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.
MITRE is populating this ID because it was assigned prior to Lenovo becoming a CNA. A buffer overflow vulnerability was reported, (fixed and publicly disclosed in 2015) in the Lenovo Service Engine (LSE), affecting various versions of BIOS for Lenovo Notebooks, that could allow a remote user to execute arbitrary code on the system.
A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.
An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. A buffer overflow existed in the vaultServer component. This was exploitable by a remote unauthenticated attacker.
XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.
A maliciously crafted PDF file, when parsed through Autodesk applications, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process.
A vulnerability was detected in Tenda CH22 1.0.0.1. Affected is the function formWrlExtraGet of the file /goform/WrlExtraGet. Performing a manipulation of the argument chkHz results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.
Heap buffer overflow in paddle.repeat_interleave in PaddlePaddle before 2.6.0. This flaw can lead to a denial of service, information disclosure, or more damage is possible.
A vulnerability has been identified in JT2Go (All versions < V14.3.0.6), Teamcenter Visualization V13.3 (All versions < V13.3.0.13), Teamcenter Visualization V14.1 (All versions < V14.1.0.12), Teamcenter Visualization V14.2 (All versions < V14.2.0.9), Teamcenter Visualization V14.3 (All versions < V14.3.0.6). The affected applications contain a stack overflow vulnerability while parsing specially crafted CGM files. This could allow an attacker to execute code in the context of the current process.
In MicroHttpServer (aka Micro HTTP Server) through a8ab029, _ParseHeader in lib/server.c allows a one-byte recv buffer overflow via a long URI.
Stack overflow vulnerability in the network acceleration module.Successful exploitation of this vulnerability may cause unauthorized file access.
Multiple stack-based buffer overflow vulnerabilities [CWE-121] in the proxy daemon of FortiWeb 5.x all versions, 6.0.7 and below, 6.1.2 and below, 6.2.6 and below, 6.3.16 and below, 6.4 all versions may allow an unauthenticated remote attacker to achieve arbitrary code execution via specifically crafted HTTP requests.
Stack overflow in paddle.linalg.lu_unpack in PaddlePaddle before 2.6.0. This flaw can lead to a denial of service, or even more damage.
A weakness has been identified in Tenda AC23 16.03.07.52. This impacts the function formSetVirtualSer of the file /goform/SetVirtualServerCfg. This manipulation of the argument list causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.
PLC Editor Versions 1.3.8 and prior is vulnerable to a stack-based buffer overflow while processing project files, which may allow an attacker to execute arbitrary code.
A buffer overflow in ecma_builtin_typedarray_prototype_filter() in JerryScript version fe3a5c0 allows an attacker to construct a fake object or a fake arraybuffer with unlimited size.
A security flaw has been discovered in Totolink WA300 5.2cu.7112_B20190227. The affected element is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument http_host results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.
A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.
A buffer overflow vulnerability in stm32_mw_usb_host of STMicroelectronics in versions before 3.5.1 allows an attacker to execute arbitrary code when the descriptor contains more endpoints than USBH_MAX_NUM_ENDPOINTS. The library is typically integrated when using a RTOS such as FreeRTOS on STM32 MCUs.
The MongoDB C Driver's Cyrus SASL integration performs unsafe string copying during username canonicalization, enabling a heap buffer overflow before any authentication or network traffic. This may be triggered by passing untrusted input in the username of a MongoDB URI with authMechanism=GSSAPI.
A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Cesanta MJS 2.20.0 has a getprop_builtin_foreign out-of-bounds read if a Built-in API name occurs in a substring of an input string.
WECON LeviStudioU Versions 2019-09-21 and prior are vulnerable to multiple stack-based buffer overflow instances while parsing project files, which may allow an attacker to execute arbitrary code.
XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.
XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.
A security vulnerability has been detected in EFM ipTIME NAS1dual 1.5.24. This issue affects the function get_csrf_whites of the file /cgi/advanced/misc_main.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.