In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: add hash if ready poll request can't complete inline If we don't, then we may lose access to it completely, leading to a request leak. This will eventually stall the ring exit process as well.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to decrease the reference count in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp().

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: fix of_iomap memory leak Smatch reports: drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn: 'base' from of_iomap() not released on lines: 496. This problem was also found in linux-next. In mtk_clk_simple_probe(), base is not released when handling errors if clk_data is not existed, which may cause a leak. So free_base should be added here to release base.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix percpu counter block leak on error path when creating new netns Here is the stack where we allocate percpu counter block: +-< __alloc_percpu +-< xt_percpu_counter_alloc +-< find_check_entry # {arp,ip,ip6}_tables.c +-< translate_table And it can be leaked on this code path: +-> ip6t_register_table +-> translate_table # allocates percpu counter block +-> xt_register_table # fails there is no freeing of the counter block on xt_register_table fail. Note: xt_percpu_counter_free should be called to free it like we do in do_replace through cleanup_entry helper (or in __ip6t_unregister_table). Probability of hitting this error path is low AFAICS (xt_register_table can only return ENOMEM here, as it is not replacing anything, as we are creating new netns, and it is hard to imagine that all previous allocations succeeded and after that one in xt_register_table failed). But it's worth fixing even the rare leak.

In the Linux kernel, the following vulnerability has been resolved: spi: qup: Don't skip cleanup in remove's error path Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails.

In the Linux kernel, the following vulnerability has been resolved: PM: domains: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event() The kfree() should be called when memory fails to be allocated for cb_data in xlnx_add_cb_for_notify_event(), otherwise there will be a memory leak, so add kfree() to fix it.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential memleak in dasd_eckd_init() `dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it also needs to be freed before the error returns, just like the other cases in this function.

In the Linux kernel, the following vulnerability has been resolved: misc: vmw_balloon: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup} If the filename casefolding fails, we'll be leaking memory from the fscrypt_name struct, namely from the 'crypto_buf.name' member. Make sure we free it in the error path on both ext4_fname_setup_filename() and ext4_fname_prepare_lookup() functions.

In the Linux kernel, the following vulnerability has been resolved: nvme-core: fix dev_pm_qos memleak Call dev_pm_qos_hide_latency_tolerance() in the error unwind patch to avoid following kmemleak:- blktests (master) # kmemleak-clear; ./check nvme/044; blktests (master) # kmemleak-scan ; kmemleak-show nvme/044 (Test bi-directional authentication) [passed] runtime 2.111s ... 2.124s unreferenced object 0xffff888110c46240 (size 96): comm "nvme", pid 33461, jiffies 4345365353 (age 75.586s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000069ac2cec>] kmalloc_trace+0x25/0x90 [<000000006acc66d5>] dev_pm_qos_update_user_latency_tolerance+0x6f/0x100 [<00000000cc376ea7>] nvme_init_ctrl+0x38e/0x410 [nvme_core] [<000000007df61b4b>] 0xffffffffc05e88b3 [<00000000d152b985>] 0xffffffffc05744cb [<00000000f04a4041>] vfs_write+0xc5/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp().

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix leak of 'r10bio->remaining' for recovery raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid.

In the Linux kernel, the following vulnerability has been resolved: tracing: Free error logs of tracing instances When a tracing instance is removed, the error messages that hold errors that occurred in the instance needs to be freed. The following reports a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger # cat instances/foo/error_log [ 117.404795] hist:sched:sched_switch: error: Couldn't find field Command: hist:keys=x ^ # rmdir instances/foo Then check for memory leaks: # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88810d8ec700 (size 192): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff `.ha....`.ha.... a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00 .0......&....... backtrace: [<00000000dae26536>] kmalloc_trace+0x2a/0xa0 [<00000000b2938940>] tracing_log_err+0x277/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff888170c35a00 (size 32): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74 . Command: hist 3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00 :keys=x......... backtrace: [<000000006a747de5>] __kmalloc+0x4d/0x160 [<000000000039df5f>] tracing_log_err+0x29b/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc The problem is that the error log needs to be freed when the instance is removed.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in do_rename If renaming a file in an encrypted directory, function fscrypt_setup_filename allocates memory for a file name. This name is never used, and before returning to the caller the memory for it is not freed. When running kmemleak on it we see that it is registered as a leak. The report below is triggered by a simple program 'rename' that renames a file in an encrypted directory: unreferenced object 0xffff888101502840 (size 32): comm "rename", pid 9404, jiffies 4302582475 (age 435.735s) backtrace: __kmem_cache_alloc_node __kmalloc fscrypt_setup_filename do_rename ubifs_rename vfs_rename do_renameat2 To fix this we can remove the call to fscrypt_setup_filename as it's not needed.

In the Linux kernel, the following vulnerability has been resolved: tun: Fix memory leak for detached NAPI queue. syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [< ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Do `kfree_skb(new)` before `goto out` to prevent potential leak.

In the Linux kernel, the following vulnerability has been resolved: USB: dwc3: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix memory leaks in error path The memory allocated by vxlan_vnigroup_init() is not freed in the error path, leading to memory leaks [1]. Fix by calling vxlan_vnigroup_uninit() in the error path. The leaks can be reproduced by annotating gro_cells_init() with ALLOW_ERROR_INJECTION() and then running: # echo "100" > /sys/kernel/debug/fail_function/probability # echo "1" > /sys/kernel/debug/fail_function/times # echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject # printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval # ip link add name vxlan0 type vxlan dstport 4789 external vnifilter RTNETLINK answers: Cannot allocate memory [1] unreferenced object 0xffff88810db84a00 (size 512): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v............. 03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H........... backtrace: [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60 [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff8424da78>] do_syscall_64+0x38/0x80 unreferenced object 0xffff88810e76d5f8 (size 192): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O..... 08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v..... backtrace: [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90 [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0 [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0 [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90

In the Linux kernel, the following vulnerability has been resolved: HV: hv_balloon: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: media: hi846: Fix memleak in hi846_init_controls() hi846_init_controls doesn't clean the allocated ctrl_hdlr in case there is a failure, which causes memleak. Add v4l2_ctrl_handler_free to free the resource properly.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc() Don't allocate memory again when IOC is being reinitialized.

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix leak in devfreq_dev_release() srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix memory leak in rtw_usb_probe() drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement.

In the Linux kernel, the following vulnerability has been resolved: drivers: base: component: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe Use devm_of_iomap() instead of of_iomap() to automatically handle the unused ioremap region. If any error occurs, regions allocated by kzalloc() will leak, but using devm_kzalloc() instead will automatically free the memory using devm_kfree(). Also, fix error handling of hws by adding unregister_hws label, which unregisters remaining hws when iomap failed.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fw: fix memory leak in debugfs Fix a memory leak that occurs when reading the fw_info file all the way, since we return NULL indicating no more data, but don't free the status tracking object.

In the Linux kernel, the following vulnerability has been resolved: media: imon: fix access to invalid resource for the second interface imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time.

In the Linux kernel, the following vulnerability has been resolved: USB: uhci: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove() Free mpi3mr_hba_port at .remove.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create The memory pointed to by the fs->any pointer is not freed in the error path of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_fs_tt_redirect_any_destroy().

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine).

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix SKB corruption in REO destination ring While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix vram leak on bind errors Make sure to release the VRAM buffer also in a case a subcomponent fails to bind. Patchwork: https://patchwork.freedesktop.org/patch/525094/

In the Linux kernel, the following vulnerability has been resolved: kernel/fail_function: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: Add missing free for alloc_percpu Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid memory leak, same as the "pf->hw.lmt_info" in `drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup Fix device unregister memory leak and alway cleanup all configured rx queues in mt76_dma_tx_cleanup routine.

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc95xx: Limit packet length to skb->len Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: PM: EM: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: time/debug: Fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: spi: imx: Don't skip cleanup in remove's error path Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails.

In the Linux kernel, the following vulnerability has been resolved: caif: fix memory leak in cfctrl_linkup_request() When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix memory leak of se_io context in nfc_genl_se_io The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix slicing memory leak The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up.

In the Linux kernel, the following vulnerability has been resolved: net: fix net_dev_start_xmit trace event vs skb_transport_offset() After blamed commit, we must be more careful about using skb_transport_offset(), as reminded us by syzbot: WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline] WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Modules linked in: CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline] RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff RSP: 0018:ffffc900002bf700 EFLAGS: 00010293 RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67 R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline] [<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline] [<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660 [<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108 [<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 [<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] [<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] [<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701 [<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289 [<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436