In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix user-after-free from session log off There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used.

In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: x86/lam: Disable ADDRESS_MASKING in most cases Linear Address Masking (LAM) has a weakness related to transient execution as described in the SLAM paper[1]. Unless Linear Address Space Separation (LASS) is enabled this weakness may be exploitable. Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST, or when speculation mitigations have been disabled at compile time, otherwise keep LAM disabled. There are no processors in market that support LAM yet, so currently nobody is affected by this issue. [1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf [2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/ [ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ]

In the Linux kernel, the following vulnerability has been resolved: driver core: bus: Fix double free in driver API bus_register() For bus_register(), any error which happens after kset_register() will cause that @priv are freed twice, fixed by setting @priv with NULL after the first free.

In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in degamma hardware format translation Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a check for memory allocation __alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free in add_inode_ref() The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL, dir = read_one_inode(root, parent_objectid); if (!dir) { ret = -ENOENT; goto out; } inode = read_one_inode(root, inode_objectid); if (!inode) { ret = -EIO; goto out; } then "name.name" would be freed on "out" before being initialized. out: ... kfree(name.name); This issue was reported by Coverity with CID 1526744.

In the Linux kernel, the following vulnerability has been resolved: drm/stm: Avoid use-after-free issues with crtc and plane ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in ksmbd_smb2_session_create There is a race condition between ksmbd_smb2_session_create and ksmbd_expire_session. This patch add missing sessions_table_lock while adding/deleting session from global session table.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix UAF on iso_sock_timeout conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock so this checks if the conn->sk is still valid by checking if it part of iso_sk_list.

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: Add cancel_work_sync before module remove If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double brelse() the buffer of the extents path In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: <TASK> __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================

In the Linux kernel, the following vulnerability has been resolved: usb: musb: sunxi: Fix accessing an released usb phy Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit().

In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: must hold reference on net namespace BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0 Read of size 8 at addr ffff8880106fe400 by task repro/72= bpf_nf_link_release+0xda/0x1e0 bpf_link_free+0x139/0x2d0 bpf_link_release+0x68/0x80 __fput+0x414/0xb60 Eric says: It seems that bpf was able to defer the __nf_unregister_net_hook() after exit()/close() time. Perhaps a netns reference is missing, because the netns has been dismantled/freed already. bpf_nf_link_attach() does : link->net = net; But I do not see a reference being taken on net. Add such a reference and release it after hook unreg. Note that I was unable to get syzbot reproducer to work, so I do not know if this resolves this splat.

In the Linux kernel, the following vulnerability has been resolved: udf: fix uninit-value use in udf_get_fileshortad Check for overflow when computing alen in udf_current_aext to mitigate later uninit-value use in udf_get_fileshortad KMSAN bug[1]. After applying the patch reproducer did not trigger any issue[2]. [1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df [2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000

In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unregister redistributor for failed vCPU creation Alex reports that syzkaller has managed to trigger a use-after-free when tearing down a VM: BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758 CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119 print_report+0x144/0x7a4 mm/kasan/report.c:377 kasan_report+0xcc/0x128 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409 __fput+0x198/0x71c fs/file_table.c:422 ____fput+0x20/0x30 fs/file_table.c:450 task_work_run+0x1cc/0x23c kernel/task_work.c:228 do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50 el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169 el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Upon closer inspection, it appears that we do not properly tear down the MMIO registration for a vCPU that fails creation late in the game, e.g. a vCPU w/ the same ID already exists in the VM. It is important to consider the context of commit that introduced this bug by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That change correctly sought to avoid an srcu v. config_lock inversion by breaking up the vCPU teardown into two parts, one guarded by the config_lock. Fix the use-after-free while avoiding lock inversion by adding a special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe because failed vCPUs are torn down outside of the config_lock.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix double free issue during amdgpu module unload Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK>

In the Linux kernel, the following vulnerability has been resolved: tracing: Consider the NULL character when validating the event length strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it.

In the Linux kernel, the following vulnerability has been resolved: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Vangogh: Fix kernel memory out of bounds write KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) (cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: Fix use-after-free in gsm_cleanup_mux BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] Read of size 8 at addr ffff88815fe99c00 by task poc/3379 CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <TASK> gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm] __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm] ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 Allocated by task 65: gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm] gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm] gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm] gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm] tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391 kthread+0x2a3/0x370 kernel/kthread.c:389 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257 Freed by task 3367: kfree+0x126/0x420 mm/slub.c:4580 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 [Analysis] gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux can be freed by multi threads through ioctl,which leads to the occurrence of uaf. Protect it by gsm tx lock.

In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: assign dh_key to NULL after kfree_sensitive ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace.

In the Linux kernel, the following vulnerability has been resolved: mac802154: Fix potential RCU dereference issue in mac802154_scan_worker In the `mac802154_scan_worker` function, the `scan_req->type` field was accessed after the RCU read-side critical section was unlocked. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, such as accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the `scan_req->type` value is now stored in a local variable `scan_req_type` while still within the RCU read-side critical section. The `scan_req_type` is then used after the RCU lock is released, ensuring that the type value is safely accessed without violating RCU rules.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add rough attr alloc_size check

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in smb3_preauth_hash_rsp ksmbd_user_session_put should be called under smb3_preauth_hash_rsp(). It will avoid freeing session before calling smb3_preauth_hash_rsp().

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in OPTEE transport Channels can be shared between protocols, avoid freeing the same channel descriptors twice when unloading the stack.

In the Linux kernel, the following vulnerability has been resolved: scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del() The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for accessing waker_bfqq after splitting After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list.

In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set.

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix off-by-one error in sd_read_block_characteristics() Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - inject error before stopping queue The master ooo cannot be completely closed when the accelerator core reports memory error. Therefore, the driver needs to inject the qm error to close the master ooo. Currently, the qm error is injected after stopping queue, memory may be released immediately after stopping queue, causing the device to access the released memory. Therefore, error is injected to close master ooo before stopping queue to ensure that the device does not access the released memory.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adc128d818) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.

In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix use-after-free when removing resource in vmci_resource_remove() When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove().

In the Linux kernel, the following vulnerability has been resolved: ice: move netif_queue_set_napi to rtnl-protected sections Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154

In the Linux kernel, the following vulnerability has been resolved: ila: call nf_unregister_net_hooks() sooner syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_ini ---truncated---