In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Always release hdev at the end of iso_listen_bis Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix NULL pointer dereference on certain command aborts If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell ring likely is unnecessary too, but it's harmless. Leave it alone. This is probably Bug 219532, but no confirmation has been received. The issue has been independently reproduced and confirmed fixed using a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever. Everything continued working normally after several prevented crashes.

In the Linux kernel, the following vulnerability has been resolved: selinux: ignore unknown extended permissions When evaluating extended permissions, ignore unknown permissions instead of calling BUG(). This commit ensures that future permissions can be added without interfering with older kernels.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: Add check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference When iterating over the links of a vif, we need to make sure that the pointer is valid (in other words - that the link exists) before dereferncing it. Use for_each_vif_active_link that also does the check.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix fault on fd close after unbind If userspace holds an fd open, unbinds the device and then closes it, the driver shouldn't try to access the hardware. Protect it by using drm_dev_enter()/drm_dev_exit(). This fixes the following page fault: <6> [IGT] xe_wedged: exiting, ret=98 <1> BUG: unable to handle page fault for address: ffffc901bc5e508c <1> #PF: supervisor read access in kernel mode <1> #PF: error_code(0x0000) - not-present page ... <4> xe_lrc_update_timestamp+0x1c/0xd0 [xe] <4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe] <4> xe_exec_queue_fini+0x16/0xb0 [xe] <4> __guc_exec_queue_fini_async+0xc4/0x190 [xe] <4> guc_exec_queue_fini_async+0xa0/0xe0 [xe] <4> guc_exec_queue_fini+0x23/0x40 [xe] <4> xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> xe_file_close+0xd4/0x1a0 [xe] <4> drm_file_free+0x210/0x280 [drm] <4> drm_close_helper.isra.0+0x6d/0x80 [drm] <4> drm_release_noglobal+0x20/0x90 [drm] (cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8)

In the Linux kernel, the following vulnerability has been resolved: mailbox: th1520: Fix a NULL vs IS_ERR() bug The devm_ioremap() function doesn't return error pointers, it returns NULL. Update the error checking to match.

In the Linux kernel, the following vulnerability has been resolved: mac802154: check local interfaces before deleting sdata list syzkaller reported a corrupted list in ieee802154_if_remove. [1] Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4 hardware device from the system. CPU0 CPU1 ==== ==== genl_family_rcv_msg_doit ieee802154_unregister_hw ieee802154_del_iface ieee802154_remove_interfaces rdev_del_virtual_intf_deprecated list_del(&sdata->list) ieee802154_if_remove list_del_rcu The net device has been unregistered, since the rcu grace period, unregistration must be run before ieee802154_if_remove. To avoid this issue, add a check for local->interfaces before deleting sdata list. [1] kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56 Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7 RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000 R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0 FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:157 [inline] ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687 rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline] ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:744 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607 ___sys_sendmsg net/socket.c:2661 [inline] __sys_sendmsg+0x292/0x380 net/socket.c:2690 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when cow_file_range() failed [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases) ---truncated---

In the Linux kernel, the following vulnerability has been resolved: rtc: tps6594: Fix integer overflow on 32bit systems The problem is this multiply in tps6594_rtc_set_offset() tmp = offset * TICKS_PER_HOUR; The "tmp" variable is an s64 but "offset" is a long in the (-277774)-277774 range. On 32bit systems a long can hold numbers up to approximately two billion. The number of TICKS_PER_HOUR is really large, (32768 * 3600) or roughly a hundred million. When you start multiplying by a hundred million it doesn't take long to overflow the two billion mark. Probably the safest way to fix this is to change the type of TICKS_PER_HOUR to long long because it's such a large number.

In the Linux kernel, the following vulnerability has been resolved: workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker After commit 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") amdgpu started seeing the following warning: [ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu] ... [ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched] ... [ ] Call Trace: [ ] <TASK> ... [ ] ? check_flush_dependency+0xf5/0x110 ... [ ] cancel_delayed_work_sync+0x6e/0x80 [ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu] [ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu] [ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu] [ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched] [ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu] [ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched] [ ] process_one_work+0x217/0x720 ... [ ] </TASK> The intent of the verifcation done in check_flush_depedency is to ensure forward progress during memory reclaim, by flagging cases when either a memory reclaim process, or a memory reclaim work item is flushed from a context not marked as memory reclaim safe. This is correct when flushing, but when called from the cancel(_delayed)_work_sync() paths it is a false positive because work is either already running, or will not be running at all. Therefore cancelling it is safe and we can relax the warning criteria by letting the helper know of the calling context. References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Cleanup global '__scm' on probe failures If SCM driver fails the probe, it should not leave global '__scm' variable assigned, because external users of this driver will assume the probe finished successfully. For example TZMEM parts ('__scm->mempool') are initialized later in the probe, but users of it (__scm_smc_call()) rely on the '__scm' variable. This fixes theoretical NULL pointer exception, triggered via introducing probe deferral in SCM driver with call trace: qcom_tzmem_alloc+0x70/0x1ac (P) qcom_tzmem_alloc+0x64/0x1ac (L) qcom_scm_assign_mem+0x78/0x194 qcom_rmtfs_mem_probe+0x2d4/0x38c platform_probe+0x68/0xc8

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: Add NULL check in ads1298_init devm_kasprintf() can return a NULL pointer on failure. A check on the return value of such a call in ads1298_init() is missing. Add it.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop active perfmon if it is being destroyed If the active performance monitor (`v3d->active_perfmon`) is being destroyed, stop it first. Currently, the active perfmon is not stopped during destruction, leaving the `v3d->active_perfmon` pointer stale. This can lead to undefined behavior and instability. This patch ensures that the active perfmon is stopped before being destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix crash during unbind if gpio unit is in use We used the wrong device for the device managed functions. We used the usb device, when we should be using the interface device. If we unbind the driver from the usb interface, the cleanup functions are never called. In our case, the IRQ is never disabled. If an IRQ is triggered, it will try to access memory sections that are already free, causing an OOPS. We cannot use the function devm_request_threaded_irq here. The devm_* clean functions may be called after the main structure is released by uvc_delete. Luckily this bug has small impact, as it is only affected by devices with gpio units and the user has to unbind the device, a disconnect will not trigger this error.

In the Linux kernel, the following vulnerability has been resolved: bpf: track changes_pkt_data property for global functions When processing calls to certain helpers, verifier invalidates all packet pointers in a current state. For example, consider the following program: __attribute__((__noinline__)) long skb_pull_data(struct __sk_buff *sk, __u32 len) { return bpf_skb_pull_data(sk, len); } SEC("tc") int test_invalidate_checks(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP; skb_pull_data(sk, 0); *p = 42; return TCX_PASS; } After a call to bpf_skb_pull_data() the pointer 'p' can't be used safely. See function filter.c:bpf_helper_changes_pkt_data() for a list of such helpers. At the moment verifier invalidates packet pointers when processing helper function calls, and does not traverse global sub-programs when processing calls to global sub-programs. This means that calls to helpers done from global sub-programs do not invalidate pointers in the caller state. E.g. the program above is unsafe, but is not rejected by verifier. This commit fixes the omission by computing field bpf_subprog_info->changes_pkt_data for each sub-program before main verification pass. changes_pkt_data should be set if: - subprogram calls helper for which bpf_helper_changes_pkt_data returns true; - subprogram calls a global function, for which bpf_subprog_info->changes_pkt_data should be set. The verifier.c:check_cfg() pass is modified to compute this information. The commit relies on depth first instruction traversal done by check_cfg() and absence of recursive function calls: - check_cfg() would eventually visit every call to subprogram S in a state when S is fully explored; - when S is fully explored: - every direct helper call within S is explored (and thus changes_pkt_data is set if needed); - every call to subprogram S1 called by S was visited with S1 fully explored (and thus S inherits changes_pkt_data from S1). The downside of such approach is that dead code elimination is not taken into account: if a helper call inside global function is dead because of current configuration, verifier would conservatively assume that the call occurs for the purpose of the changes_pkt_data computation.

In the Linux kernel, the following vulnerability has been resolved: fs: relax assertions on failure to encode file handles Encoding file handles is usually performed by a filesystem >encode_fh() method that may fail for various reasons. The legacy users of exportfs_encode_fh(), namely, nfsd and name_to_handle_at(2) syscall are ready to cope with the possibility of failure to encode a file handle. There are a few other users of exportfs_encode_{fh,fid}() that currently have a WARN_ON() assertion when ->encode_fh() fails. Relax those assertions because they are wrong. The second linked bug report states commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") in v6.6 as the regressing commit, but this is not accurate. The aforementioned commit only increases the chances of the assertion and allows triggering the assertion with the reproducer using overlayfs, inotify and drop_caches. Triggering this assertion was always possible with other filesystems and other reasons of ->encode_fh() failures and more particularly, it was also possible with the exact same reproducer using overlayfs that is mounted with options index=on,nfs_export=on also on kernels < v6.6. Therefore, I am not listing the aforementioned commit as a Fixes commit. Backport hint: this patch will have a trivial conflict applying to v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy() In split_large_buddy(), we might call pfn_to_page() on a PFN that might not exist. In corner cases, such as when freeing the highest pageblock in the last memory section, this could result with CONFIG_SPARSEMEM && !CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and __section_mem_map_addr() dereferencing that NULL pointer. Let's fix it, and avoid doing a pfn_to_page() call for the first iteration, where we already have the page. So far this was found by code inspection, but let's just CC stable as the fix is easy.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar() In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured. This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host). This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks. If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar. While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.)

In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable().

In the Linux kernel, the following vulnerability has been resolved: ipc: fix memory leak in init_mqueue_fs() When setup_mq_sysctls() failed in init_mqueue_fs(), mqueue_inode_cachep is not released. In order to fix this issue, the release path is reordered.

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Fix a null-ptr-deref bug in buffer_prepare() When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue(). The following log can reveal it: [ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0 Fix this by checking the return value of cx88_risc_buffer() [hverkuil: fix coding style issues]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Disable works on hci_unregister_dev This make use of disable_work_* on hci_unregister_dev since the hci_dev is about to be freed new submissions are not disarable.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: check for NULL in btrtl_setup_realtek() If insert an USB dongle which chip is not maintained in ic_id_table, it will hit the NULL point accessed. Add a null point check to avoid the Kernel Oops.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix accessing invalid dip_ctx during destroying QP If it fails to modify QP to RTR, dip_ctx will not be attached. And during detroying QP, the invalid dip_ctx pointer will be accessed.

In the Linux kernel, the following vulnerability has been resolved: OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth from the OPP table but the bandwidth table was not created because the interconnect properties were missing in the OPP consumer node, the kernel will crash with: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 ... pc : _read_bw+0x8/0x10 lr : _opp_table_find_key+0x9c/0x174 ... Call trace: _read_bw+0x8/0x10 (P) _opp_table_find_key+0x9c/0x174 (L) _find_key+0x98/0x168 dev_pm_opp_find_bw_ceil+0x50/0x88 ... In order to fix the crash, create an assert function to check if the bandwidth table was created before trying to get a bandwidth with _read_bw().

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix invalid irq restore in scx_ops_bypass() While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to rq_unlock() which could re-enable IRQ prematurely leading to the following warning: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Sched_ext: create_dsq (enabling) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : warn_bogus_irq_restore+0x30/0x40 lr : warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 (P) warn_bogus_irq_restore+0x30/0x40 (L) scx_ops_bypass+0x224/0x3b8 scx_ops_enable.isra.0+0x2c8/0xaa8 bpf_scx_reg+0x18/0x30 ... irq event stamp: 33739 hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8 hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8 Drop the stray _irqrestore().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominator defaults to 1 [WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)

In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before txBeginAnon() call Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299

In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq.

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Fix potential error pointer dereference in detach_pm() The proble is on the first line: if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i])) If jpeg->pd_dev[i] is an error pointer, then passing it to pm_runtime_suspended() will lead to an Oops. The other conditions check for both error pointers and NULL, but it would be more clear to use the IS_ERR_OR_NULL() check for that.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled When the caching for a cookie is temporarily disabled (e.g. due to a DIO write on that file), future copying to the cache for that file is disabled until all fds open on that file are closed. However, if netfslib is using the deprecated PG_private_2 method (such as is currently used by ceph), and decides it wants to copy to the cache, netfs_advance_write() will just bail at the first check seeing that the cache stream is unavailable, and indicate that it dealt with all the content. This means that we have no subrequests to provide notifications to drive the state machine or even to pin the request and the request just gets discarded, leaving the folios with PG_private_2 set. Fix this by jumping directly to cancel the request if the cache is not available. That way, we don't remove mark3 from the folio_queue list and netfs_pgpriv2_cancel() will clean up the folios. This was found by running the generic/013 xfstest against ceph with an active cache and the "-o fsc" option passed to ceph. That would usually hang

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object.

In the Linux kernel, the following vulnerability has been resolved: ubifs: skip dumping tnc tree when zroot is null Clearing slab cache will free all znode in memory and make c->zroot.znode = NULL, then dumping tnc tree will access c->zroot.znode which cause null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table The function atomctrl_get_smc_sclk_range_table() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve SMU_Info table, it returns NULL which is later dereferenced. Found by Linux Verification Center (linuxtesting.org) with SVACE. In practice this should never happen as this code only gets called on polaris chips and the vbios data table will always be present on those chips.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix ceph copy to cache on write-begin At the end of netfs_unlock_read_folio() in which folios are marked appropriately for copying to the cache (either with by being marked dirty and having their private data set or by having PG_private_2 set) and then unlocked, the folio_queue struct has the entry pointing to the folio cleared. This presents a problem for netfs_pgpriv2_write_to_the_cache(), which is used to write folios marked with PG_private_2 to the cache as it expects to be able to trawl the folio_queue list thereafter to find the relevant folios, leading to a hang. Fix this by not clearing the folio_queue entry if we're going to do the deprecated copy-to-cache. The clearance will be done instead as the folios are written to the cache. This can be reproduced by starting cachefiles, mounting a ceph filesystem with "-o fsc" and writing to it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP The linkDMA should not be released on stop trigger since a stream re-start might happen without closing of the stream. This leaves a short time for other streams to 'steal' the linkDMA since it has been released. This issue is not easy to reproduce under normal conditions as usually after stop the stream is closed, or the same stream is restarted, but if another stream got in between the stop and start, like this: aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120 CTRL+z aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120 then the link DMA channels will be mixed up, resulting firmware error or crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles() During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process which will re-order the list if an entry with target pattern is found. And once one is found, should have aborted the list_for_each_entry. But, `break` just aborted the inner for-loop. The outer list_for_each_entry still continues. Normally, only the first entry will match the target pattern, and the re-ordering will change nothing, so there won't be soft lockup. However, in some special cases, soft lockup would happen. Fix it by `goto fill` to break from the list_for_each_entry. The following is a sample of kernel log for this problem. watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055] [...] RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core [...]

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix channel survey memory allocation size KASAN reported a memory allocation issue in wcn->chan_survey due to incorrect size calculation. This commit uses kcalloc to allocate memory for wcn->chan_survey, ensuring proper initialization and preventing the use of uninitialized values when there are no frames on the channel.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links In mt7925_change_vif_links() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix re-dirty process of tree-log nodes There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree.

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Prevent integer overflow issue In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix handling of received connection abort Fix the handling of a connection abort that we've received. Though the abort is at the connection level, it needs propagating to the calls on that connection. Whilst the propagation bit is performed, the calls aren't then woken up to go and process their termination, and as no further input is forthcoming, they just hang. Also add some tracing for the logging of connection aborts.

In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix for a potential deadlock This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1 ---- ---- lock(&instance->reset_mutex); lock(&shost->scan_mutex); lock(&instance->reset_mutex); lock(&shost->scan_mutex); Fix this by temporarily releasing the reset_mutex.