TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

The PING function on the TP-Link TL-WR840N EU v5 router with firmware through TL-WR840N(EU)_V5_171211 is vulnerable to remote code execution via a crafted payload in an IP address input field.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function uninstallPluginReqHandle.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function RegisterRegister.

TP-Link TL-WDR7660 2.0.30 has a stack overflow vulnerability via the function deviceInfoJsonToBincauses.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function chkResetVeriRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function getRegVeriRegister.

There is an unauthorized access vulnerability in TP-LINK ER5120G 4.0 2.0.0 Build 210817 Rel.80868n, which allows attackers to obtain sensitive information of the device without authentication, obtain user tokens, and ultimately log in to the device backend management.

TP-Link Tapo C200 IP camera, on its 1.1.15 firmware version and below, is affected by an unauthenticated RCE vulnerability, present in the uhttpd binary running by default as root. The exploitation of this vulnerability allows an attacker to take full control of the camera.

TP-Link WR841N V8, TP-Link TL-WR940N V2, and TL-WR941ND V5 were discovered to contain a buffer overflow via the radiusSecret parameter at /userRpm/WlanSecurityRpm.

TP-Link TL-WR941ND V6 were discovered to contain a buffer overflow via the pSize parameter at /userRpm/PingIframeRpm.

TP-Link Archer AX10(EU)_V1.2_230220 was discovered to contain a buffer overflow via the function FUN_131e8 - 0x132B4.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link TL-WA1201 1.0.1 Build 20200709 rel.66244(5553) wireless access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14656.

TP-Link Archer AX21(US)_V3_1.1.4 Build 20230219 and AX21(US)_V3.6_1.1.4 Build 20230219 are vulnerable to Buffer Overflow.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the devicePwd parameter in the function sub_ 40A80C.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.

TP-Link TL-WR845N devices with firmware TL-WR845N(UN)_V4_200909 and TL-WR845N(UN)_V4_190219 was discovered to contain a hardcoded password for the root account which can be obtained by analyzing downloaded firmware or via a brute force attack through physical access to the router. NOTE: The supplier has stated that this issue was fixed in firmware versions 250401 or later.

A vulnerability in the TP-Link Archer c20 router with firmware version V6.6_230412 and earlier permits unauthorized individuals to bypass the authentication of some interfaces under the /cgi directory. When adding Referer: http://tplinkwifi.net to the the request, it will be recognized as passing the authentication. NOTE: this is disputed by the Supplier because the response to the API call is only "non-sensitive UI initialization variables."

A command injection issue was found in TP-Link MR3020 v.1_150921 that allows a remote attacker to execute arbitrary commands via a crafted request to the tftp endpoint.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

A password-disclosure issue in the web interface on certain TP-Link devices allows a remote attacker to get full administrative access to the web panel. This affects WA901ND devices before 3.16.9(201211) beta, and Archer C5, Archer C7, MR3420, MR6400, WA701ND, WA801ND, WDR3500, WDR3600, WE843N, WR1043ND, WR1045ND, WR740N, WR741ND, WR749N, WR802N, WR840N, WR841HP, WR841N, WR842N, WR842ND, WR845N, WR940N, WR941HP, WR945N, WR949N, and WRD4300 devices.

Symlink Traversal vulnerability in TP-LINK TL-WDR4300 and TL-1043ND..

TL-WR845N(UN)_V4_201214, TP-Link TL-WR845N(UN)_V4_200909, and TL-WR845N(UN)_V4_190219 was discovered to transmit user credentials in plaintext after executing a factory reset.

The web interface on multiple Omada switches does not adequately validate certain external inputs, which may lead to out-of-bound memory access when processing crafted requests. Under specific conditions, this flaw may result in unintended command execution.<br>An unauthenticated attacker with network access to the affected interface may cause memory corruption, service instability, or information disclosure. Successful exploitation may allow remote code execution or denial-of-service.

This vulnerability in AX53 v1 results from insufficient input sanitization in the device’s probe handling logic, where unvalidated parameters can trigger a stack-based buffer overflow that causes the affected service to crash and, under specific conditions, may enable remote code execution through complex heap-spray techniques. Successful exploitation may result in repeated service unavailability and, in certain scenarios, allow an attacker to gain control of the device.

A command injection vulnerability on AX53 v1 occurs in mscd debug functionality due to insufficient input handling, allowing log redirection to arbitrary files and concatenation of unvalidated file content into shell commands, enabling authenticated attackers to inject and execute arbitrary commands. Successful exploitation may allow execution of malicious commands and ultimately full control of the device.

An arbitrary OS command may be executed on the product by a remote unauthenticated attacker.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

In TP-Link routers, Archer C5 and WR710N-V1, running the latest available code, when receiving HTTP Basic Authentication the httpd service can be sent a crafted packet that causes a heap overflow. This can result in either a DoS (by crashing the httpd process) or an arbitrary code execution.

The web configuration interface of the TP-Link M7350 V3 with firmware version 190531 is affected by a pre-authentication command injection vulnerability.

TP-LINK TL-R473G 2.0.1 Build 220529 Rel.65574n was discovered to contain a remote code execution vulnerability which is exploited via a crafted packet.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a command injection vulnerability via the component oal_setIp6DefaultRoute.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a command injection vulnerability via the component oal_startPing.

TL-WR841Nv14_US_0.9.1_4.18 routers were discovered to contain a stack overflow in the function dm_fillObjByStr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

TP-Link Archer A54 Archer A54(US)_V1_210111 routers were discovered to contain a stack overflow in the function DM_ Fillobjbystr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

TP-Link TL-WR902AC(US)_V3_191209 routers were discovered to contain a stack overflow in the function DM_ Fillobjbystr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

TP-Link TL-WA850RE Wi-Fi Range Extender before v6_200923 was discovered to use highly predictable and easily detectable session keys, allowing attackers to gain administrative privileges.

The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/modify_account_pwd feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerabilitiy exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/register feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerabiltiy exists in TP-LINK WR-886N 20190826 2.3.8 in thee /cloud_config/router_post/login feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/upgrade_info feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.