ActivePresenter 6.1.6 is affected by a memory corruption vulnerability that may result in a denial of service (DoS) or arbitrary code execution.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80046eb4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.

In gatts_process_primary_service_req of gatt_sr.cc, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered on atasm, version 1.09. A stack-buffer-overflow vulnerability in function aprintf() in asm.c allows attackers to execute arbitrary code on the system via a crafted file.

Foxit Reader before 10.1.4 and PhantomPDF before 10.1.4 have an out-of-bounds write because the Cross-Reference table is mishandled during Office document conversion.

dpic 2021.04.10 has a Heap Buffer Overflow in themakevar() function in dpic.y

A flaw was found in the gstreamer h264 component of gst-plugins-bad before v1.18.1 where when parsing a h264 header, an attacker could cause the stack to be smashed, memory corruption and possibly code execution.

Out-of-bounds Write vulnerability in MolotovCherry Android-ImageMagick7.This issue affects Android-ImageMagick7: before 7.1.2-10.

In GKI_getbuf of gki_buffer.cc, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12Android ID: A-205729183

Out-of-bound write in libsaped.so prior to SMR Dec-2024 Release 1 allows remote attackers to execute arbitrary code.

An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /gofrom/setwanType allows attackers to execute arbitrary code on the system via a crafted post request. This occurs when input vector controlled by malicious attack get copied to the stack variable.

An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setportList allows attackers to execute arbitrary code on the system via a crafted post request.

An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setVLAN allows attackers to execute arbitrary code on the system via a crafted post request.

The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code on the WebAccess/SCADA (WebAccess/SCADA versions prior to 8.4.5, WebAccess/SCADA versions prior to 9.0.1).

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

An issue was discovered in Foxit PhantomPDF Mac 3.3 and Foxit Reader for Mac before 3.3. It allows stack consumption because of interaction between ICC-Based color space and Alternate color space.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.

Issue summary: Converting an excessively large OCTET STRING value to a hexadecimal string leads to a heap buffer overflow on 32 bit platforms. Impact summary: A heap buffer overflow may lead to a crash or possibly an attacker controlled code execution or other undefined behavior. If an attacker can supply a crafted X.509 certificate with an excessively large OCTET STRING value in extensions such as the Subject Key Identifier (SKID) or Authority Key Identifier (AKID) which are being converted to hex, the size of the buffer needed for the result is calculated as multiplication of the input length by 3. On 32 bit platforms, this multiplication may overflow resulting in the allocation of a smaller buffer and a heap buffer overflow. Applications and services that print or log contents of untrusted X.509 certificates are vulnerable to this issue. As the certificates would have to have sizes of over 1 Gigabyte, printing or logging such certificates is a fairly unlikely operation and only 32 bit platforms are affected, this issue was assigned Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setmac allows attackers to execute arbitrary code on the system via a crafted post request.

Memory safety bugs present in Firefox 133 and Thunderbird 133. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 134 and Thunderbird 134.

Annke N48PBB (Network Video Recorder) products of version 3.4.106 build 200422 and prior are vulnerable to a stack-based buffer overflow, which allows an unauthorized remote attacker to execute arbitrary code with the same privileges as the server user (root).

Out of bounds read and write in Tint in Google Chrome on Mac prior to 145.0.7632.116 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

Five buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to initiate a denial-of-service attack and execute arbitrary code.

Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.

A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.4), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.19), APOGEE PXC Modular (BACnet) (All versions < V3.5.4), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.19), Desigo PXC00-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC00-U (All versions >= V2.3 and < V6.30.016), Desigo PXC001-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC100-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC12-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC128-U (All versions >= V2.3 and < V6.30.016), Desigo PXC200-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC36.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC50-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC64-U (All versions >= V2.3 and < V6.30.016), Desigo PXM20-E (All versions >= V2.3 and < V6.30.016), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus Source Code (All versions), TALON TC Compact (BACnet) (All versions < V3.5.4), TALON TC Modular (BACnet) (All versions < V3.5.4). FTP server does not properly validate the length of the “USER” command, leading to stack-based buffer overflows. This may result in Denial-of-Service conditions and Remote Code Execution. (FSMD-2021-0010)

In Boa, there is a possible escalation of privilege due to a stack buffer overflow. This could lead to remote escalation of privilege from a proximal attacker with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20210008; Issue ID: OSBNB00123241.

In ProxyResolverV8::SetPacScript of proxy_resolver_v8.cc, there is a possible memory corruption due to a use after free. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-139806216

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 and later QTS 5.0.0: QVR Guard 2.1.3.0 and later

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.

Improper buffer size validation of DSM packet received can lead to memory corruption in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Wearables

Delta Electronics CNCSoft-G2 lacks proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can manipulate users to visit a malicious page or file to leverage this vulnerability to execute code in the context of the current process.

The HwAirlink module has a heap overflow vulnerability in processing data packets of the proprietary protocol.Successful exploitation of this vulnerability may allow attackers to obtain process control permissions.

A memory corruption vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to disrupt system processes and potentially execute arbitrary code with root privileges. The attacker must have network access to the GlobalProtect interface to exploit this issue. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.17. Prisma Access customers are not impacted by this issue.

Memory safety bugs present in Firefox 147 and Thunderbird 147. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148 and Thunderbird 148.

Delta Electronics CNCSoft-G2 lacks proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can manipulate an insider to visit a malicious page or file to leverage this vulnerability to execute code in the context of the current process.

Memory safety bugs present in Firefox ESR 140.7, Thunderbird ESR 140.7, Firefox 147 and Thunderbird 147. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Out-of-bounds write in the PCX image codec in QNX SDP versions 8.0, 7.1 and 7.0 could allow an unauthenticated attacker to cause a denial-of-service condition or execute code in the context of the process using the image codec.

An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to lack of size validation. This vulnerability requires the attacker to send a crafted HTTP POST request with a URI longer than 50 bytes. This leads to a heap overflow in wbs_post() via an strcpy() call.

A memory corruption issue was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.5, Security Update 2021-004 Catalina, Security Update 2021-005 Mojave. An application may be able to execute arbitrary code with kernel privileges.

naga v0.14.0 was discovered to contain a stack overflow via the component /wgsl/parse/mod.rs.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In CompositeDeepScanLine::readPixels, per-pixel totals are accumulated in vector<unsigned int> total_sizes for attacker-controlled large counts across many parts, total_sizes[ptr] wraps modulo 2^32. overall_sample_count is then derived from wrapped totals and used in samples[channel].resize(overall_sample_count). Decode pointer setup/consumption proceeds with true sample counts, and write operations in core unpack (generic_unpack_deep_pointers) overrun the undersized composite sample buffer. This vulnerability is fixed in v3.2.6, v3.3.8, and v3.4.6.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In 2026.01 and earlier, the default handler for the well_known_core resource coap_well_known_core_default_handler writes user-provided option data and other data into a fixed size buffer without validating the buffer is large enough to contain the response. This vulnerability allows an attacker to corrupt neighboring stack location, including security-sensitive addresses like the return address, leading to denial of service or arbitrary code execution.

Delta Electronics CNCSoft-G2 lacks proper validation of user-supplied data, which can result in a write past the end of an allocated object. An attacker can manipulate users to visit a malicious page or file to leverage this vulnerability to execute code in the context of the current process.

Dell PowerProtect Data Domain with Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.60, contain a stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

On Netcomm router models NF20MESH, NF20, and NL1902 a stack based buffer overflow affects the sessionKey parameter. By providing a specific number of bytes, the instruction pointer is able to be overwritten on the stack and crashes the application at a known location.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a stack buffer overflow occurs when processing the an attribute in msl.c. A long value overflows a fixed-size stack buffer, leading to memory corruption. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer overflow write vulnerability exists in ReadYUVImage() (coders/yuv.c) when processing malicious YUV 4:2:2 (NoInterlace) images. The pixel-pair loop writes one pixel beyond the allocated row buffer. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

navigation2 is a ROS 2 Navigation Framework and System. In 1.3.11 and earlier, a critical heap out-of-bounds write vulnerability exists in Nav2 AMCL's particle filter clustering logic. By publishing a single crafted geometry_msgs/PoseWithCovarianceStamped message with extreme covariance values to the /initialpose topic, an unauthenticated attacker on the same ROS 2 DDS domain can trigger a negative index write (set->clusters[-1]) into heap memory preceding the allocated buffer. In Release builds, the sole boundary check (assert) is compiled out, leaving zero runtime protection. This primitive allows controlled corruption of the heap chunk metadata(at least the size of the heap chunk where the set->clusters is in is controllable by the attacker), potentially leading to further exploitation. At minimum, it provides a reliable single-packet denial of service that kills localization and halts all navigation.