The Zephyr Bluetooth controller ISO Adaptation Layer (subsys/bluetooth/controller/ll_sw/isoal.c) fails to validate the length field of a framed ISO PDU start segment. Per the Bluetooth specification a start segment (sc=0) always carries a 3-byte time_offset, so its segment-header len must be at least PDU_ISO_SEG_TIMEOFFSET_SIZE (3). isoal_check_seg_header() accepted start segments with len < 3 as valid, and isoal_rx_framed_consume() then computed length = seg_hdr->len - 3 in a uint8_t, underflowing to 253-255 when len is 0-2. That oversized length is passed to isoal_rx_append_to_sdu(), whose copy is clamped only against the destination SDU buffer size, not the source PDU length, so up to ~255 bytes of controller memory beyond the received PDU are copied (via sink_sdu_write_hci()/net_buf_add_mem) into an HCI ISO data packet and delivered to the host. The PDU and its segment headers are entirely attacker-controlled and arrive over the air, reachable through both the CIS and BIS-sync HCI data paths (hci_driver.c) and the vendor data path (ull_iso.c), so a remote CIS peer or a broadcaster the device is synced to can trigger an out-of-bounds read causing information disclosure to the host and potential denial of service (faults or malformed oversized HCI ISO packets). The flaw affects all Zephyr releases since framed ISO reception was introduced in v3.0.0. The fix rejects sc=0 segments with len < 3 in isoal_check_seg_header() and adds a guard before the subtraction in isoal_rx_framed_consume().

The OCPP 1.6 client in subsys/net/lib/ocpp parsed inbound WAMP RPC frames in parse_rpc_msg() (subsys/net/lib/ocpp/ocpp_j.c) using a hand-rolled helper, extract_string_field(), that copied the message's uid and action fields with strncpy(out_buf, token + 1, outlen - 1) and then scanned the result with strchr(out_buf, '"'). Because strncpy does not NUL-terminate the destination when the source is at least outlen - 1 (127) bytes long, the subsequent strchr reads past the 128-byte destination buffer into adjacent stack memory; if a " byte is found beyond the buffer, a one-byte out-of-bounds NUL write also occurs. A related defect in extract_payload() runs strchr/strrchr over the receive buffer, which may not be NUL-terminated when a maximal-length frame fills it. The parsed bytes come directly from the OCPP central-system server over a websocket: the reader thread fills recv_buf via websocket_recv_msg() and calls parse_rpc_msg() on each inbound DATA frame (subsys/net/lib/ocpp/ocpp.c). A malicious or compromised central server, or an on-path attacker (OCPP is commonly deployed over plain ws://), can send an RPC frame whose uid or action field is 127+ bytes with no closing quote, triggering the out-of-bounds access. The primary impact is a remotely triggerable denial of service: the unbounded scan can fault on an unmapped page, and the stray NUL write can corrupt adjacent stack state. The over-read data is not reflected to the peer, so disclosure is limited. The feature is EXPERIMENTAL and must be explicitly enabled (CONFIG_OCPP). The fix replaces the manual parser with the bounds-respecting json_mixed_arr_parse() and copies the extracted uid with an explicitly NUL-terminated buffer, eliminating both over-reads.

Possible read out of bounds in dns read. Zephyr versions >= 1.14.2, >= 2.3.0 contain Out-of-bounds Read (CWE-125). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mm57-9hqw-qh44

In utf8_trunc in zephyr/lib/utils/utf8.c, last_byte_p can point to one byte before the string pointer if the string is empty.

The SocketCAN implementation validates the length of a user-provided buffer containing a socketcan_frame object using only a NET_ASSERT statement in zcan_sendto_ctx() before dereferencing it in socketcan_to_can_frame(). In production builds where assertions are disabled, a userspace application that controls the length passed to a sendto syscall can supply an incomplete or truncated frame, causing socketcan_to_can_frame() to dereference fields beyond the end of the buffer. This results in an out-of-bounds read that can cause denial-of-service crashes or, because the parsed frame contents are transmitted on the network, leak adjacent memory.

A malicious or malformed DNS packet without a payload can cause an out-of-bounds read, resulting in a crash (denial of service) or an incorrect computation.

A lack of input validation allows for out of bounds reads caused by malicious or malformed packets.

The Classic (BR/EDR) L2CAP signaling handlers l2cap_br_conf_req() and l2cap_br_conf_rsp() in subsys/bluetooth/host/classic/l2cap_br.c validated the minimum command size against buf->len (the bytes remaining in the whole received PDU) instead of len (the per-command data length from the L2CAP signaling header). Because multiple signaling commands can be packed into one PDU, buf->len may exceed a command's len. An attacker can send a CONF_REQ command with a header length smaller than the configuration-request structure (e.g. 0), followed by another command so that buf->len still satisfies the check. The check then passes incorrectly and opt_len = len - sizeof(*req) underflows the uint16_t to a near-0xFFFF value. The configuration-option loop, which lacks an opt_len-versus-buf->len guard, then walks far past the end of the pooled ACL receive buffer using net_buf pull primitives that perform no runtime bounds check, producing an out-of-bounds read of host memory and, when the out-of-bounds option bytes encode an MTU or flush-timeout option, an out-of-bounds write. The BR/EDR signaling channel is processed before pairing/encryption and an L2CAP channel to an L0 service such as SDP can be opened without pairing, so an unauthenticated peer within radio range that can establish an ACL connection can trigger the flaw, leading to memory corruption and denial of service (host/device crash). The defect is present in released versions including v4.4.0. The fix validates against len instead of buf->len in both handlers.

In subsys/debug/coredump/coredump_shell.c, print_coredump_hdr() used the 16-bit tgt_code field of a stored Zephyr coredump header directly as an index into coredump_target_code2str[], a fixed 7-element array of string pointers, with no bounds check. A stored coredump whose tgt_code is >= 7 causes an out-of-bounds read of a char* up to ~64K entries past the array; that value is passed as the %s argument to shell_print, which dereferences and walks it as a string. The result is either disclosure of device memory contents to the shell user or a crash when the out-of-bounds pointer is unmapped. The defect is reached via the coredump print shell command (cmd_coredump_print_stored_dump -> pretty_print_coredump -> parse_and_print_coredump -> print_coredump_hdr). The tgt_code field is device-generated and in-range during normal crash handling, so triggering requires local shell access plus the ability to stage or corrupt the stored coredump in the flash/in-memory backend. Introduced in v4.2.0 (commit 13abd7fe730) and present through v4.4.0; fixed by clamping out-of-range codes to the 'unknown' (index 0) entry.

The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME is 255, so the check is always false; the function then memcpy'd up to 255 name bytes and the lookup/readdir paths advanced traversal by an unvalidated de_rec_len. Each directory block is read into a block_size-sized slab buffer, and block_off can be driven near the block end by preceding entries' rec_len, so the 8-byte header read and the subsequent name memcpy can read up to ~263 bytes past the end of the block buffer into adjacent heap/slab memory. On the readdir path those bytes are returned to the caller in fs_dirent.name, leaking adjacent kernel heap memory; a de_rec_len of 0 also causes a zero-progress infinite loop (denial of service), and the unlink path's memmove(de, next, next_reclen) over unvalidated records is an additional OOB read/write source. The defect is reached by any path-based operation (open, stat, unlink, rename, mkdir) or directory listing on a mounted ext2 volume, so a crafted or corrupted ext2 image on attacker-supplied storage (SD card, USB mass storage, or otherwise mounted image) triggers it. Affected: Zephyr ext2 from its introduction in v3.5.0 through v4.4.0. The fix validates rec_len and name_len in the parser and rejects entries whose header does not fit the remaining block or whose rec_len crosses the block boundary in every traversal caller.

Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buffer via memcpy without their own bounds check, and pass the result to the application's resolve callback. A malicious or spoofed DNS server, an on-path attacker forging UDP DNS replies, or (with mDNS/LLMNR enabled) any LAN node can craft a truncated TXT or SRV response that causes an out-of-bounds read of adjacent receive-pool memory; the disclosed stale bytes (residual contents of prior DNS packets / uninitialized pool memory) are returned to the application as TXT/SRV record contents, an information leak, and may in some configurations cross the allocation boundary and fault, causing a denial of service. The read is bounded (~64 bytes for TXT, ~6 for SRV) and read-only (no write). The fix rejects any record whose declared rdata extends past dns_msg->msg_size at the single chokepoint in dns_unpack_answer(). Affected: v4.3.0 and v4.4.0.

bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling.

Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces). On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure. The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local").

subsys/net/lib/lwm2m/lwm2m_pull_context.c copied the firmware-update Package URI into a fixed static buffer (context.uri, size CONFIG_LWM2M_SWMGMT_PACKAGE_URI_LEN, default 128) with memcpy(context.uri, uri, LWM2M_PACKAGE_URI_LEN), copying exactly the destination size with no length validation. The Firmware-Update object stores the server-supplied Package URI (/5/0/1) in a 255-byte buffer, so a LwM2M management server (or an on-path attacker on a session lacking strong DTLS) can WRITE a URI of 128-254 characters; only the first 128 bytes are then copied into context.uri with no NUL terminator. That buffer is subsequently consumed as a C string by http_parser_parse_url(context.uri, strlen(context.uri), ...), strlen-based CoAP URI-path/PROXY-URI option appends, and lwm2m_parse_peerinfo(), causing an out-of-bounds read of adjacent static memory. The over-read bytes are appended to outbound CoAP requests (information disclosure of adjacent device memory to the server/proxy) and can crash the device (denial of service). The vulnerable copy was introduced by the pull-context refactor (first released in v3.0.0) and is present through v4.4.0; the default-on CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT path is affected. The fix adds a strlen(uri) >= sizeof(context.uri) check returning -ENOMEM and switches to strcpy(), guaranteeing a bounded, NUL-terminated buffer.

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

A malicious / defective bluetooth controller can cause buffer overreads in the most functions that process HCI command responses.

Out-of-bounds read vulnerability in the SSAP module of the NearLink protocol stack. Impact: Successful exploitation of this vulnerability may affect availability.

Out-of-bounds read vulnerability in the SSAP module of the NearLink protocol stack. Impact: Successful exploitation of this vulnerability may affect availability.

Heap out-of-bounds read in PKCS7 parsing. A crafted PKCS7 message can trigger an OOB read on the heap. The missing bounds check is in the indefinite-length end-of-content verification loop in PKCS7_VerifySignedData().

OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to 2.4.17, a network-adjacent attacker can send a crafted SNMP response to the CUPS SNMP backend that causes an out-of-bounds read of up to 176 bytes past a stack buffer. The leaked memory is converted from UTF-16 to UTF-8 and stored as printer supply description strings, which are subsequently visible to authenticated users via IPP Get-Printer-Attributes responses and the CUPS web interface. This vulnerability is fixed in 2.4.17.

An out-of-bounds read vulnerability in the TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 26.1 for Windows allows an attacker on the adjacent network to cause information disclosure or denial-of-service via a special crafted packet. The leaked memory could be used to bypass ASLR and facilitate further exploitation.