A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by sending a crafted Sec-WebSocket-Key header. The HTTP/1 header parser copies the header into a fixed-size buffer using a bounded copy that does not guarantee NUL termination when the input length reaches the buffer size. During upgrade handling the buffer is copied to a local stack buffer and passed to strlen(); if no NUL exists in-bounds, strlen() reads beyond the stack buffer and subsequent concatenation with the WebSocket magic string can write out of bounds. This leads to out-of-bounds read and write on stack memory, resulting in crash (denial of service) and potentially code execution. The path is reachable when CONFIG_HTTP_SERVER_WEBSOCKET is enabled.

There is an error in the condition of the last if-statement in the function smp_check_keys. It was rejecting current keys if all requirements were unmet.

Possible buffer overflow in is_mount_point

Unchecked length coming from user input in settings shell

can: out of bounds in remove_rx_filter function

Possible variant of CVE-2021-3434 in function le_ecred_reconf_req.

An off-by-one error in the Zephyr project MQTT packet length decoder can result in memory corruption and possible remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

The Zephyr MQTT parsing code performs insufficient checking of the length field on publish messages, allowing a buffer overflow and potentially remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

A malformed JSON payload that is received from an UpdateHub server may trigger memory corruption in the Zephyr OS. This could result in a denial of service in the best case, or code execution in the worst case. See NCC-NCC-016 This issue affects: zephyrproject-rtos zephyr version 2.1.0 and later versions. version 2.2.0 and later versions.

Improper Input Frame Validation in ieee802154 Processing. Zephyr versions >= v1.14.2, >= v2.2.0 contain Stack-based Buffer Overflow (CWE-121), Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3gvq-h42f-v3c7

In the Zephyr Project MQTT code, improper bounds checking can result in memory corruption and possibly remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

Buffer overflow in Zephyr USB DFU DNLOAD. Zephyr versions >= v2.5.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-c3gr-hgvr-f363

DOS: Incorrect 802154 Frame Validation for Omitted Source / Dest Addresses. Zephyr versions >= > v2.4.0 contain NULL Pointer Dereference (CWE-476), Attempt to Access Child of a Non-structure Pointer (CWE-588). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-94jg-2p6q-5364

Integer Underflow in 6LoWPAN IPHC Header Uncompression in Zephyr. Zephyr versions >= >=2.4.0 contain Integer Underflow (Wrap or Wraparound) (CWE-191). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-89j6-qpxf-pfpc

Potential buffer overflow vulnerability in the Zephyr CAN bus subsystem

Signed to unsigned conversion esp32_ipm_send

Unchecked user input length in /subsys/net/l2/wifi/wifi_shell.c can cause buffer overflows.

zephyr-rtos version 1.12.0 contains a NULL base pointer reference vulnerability in sys_ring_buf_put(), sys_ring_buf_get() that can result in CPU Page Fault (error code 0x00000010). This attack appear to be exploitable via a malicious application call the vulnerable kernel APIs (system sys_ring_buf_get() and sys_ring_buf_put).

A buffer overflow has been found in the Zephyr Project's getaddrinfo() implementation in 1.9.0 and 1.10.0.

Inconsistent handling of error cases in bluetooth hci may lead to a double free condition of a network buffer.

dns_unpack_name() caches the buffer tailroom once and reuses it while appending DNS labels. As the buffer grows, the cached size becomes incorrect, and the final null terminator can be written past the buffer. With assertions disabled (default), a malicious DNS response can trigger an out-of-bounds write when CONFIG_DNS_RESOLVER is enabled.

The SocketCAN implementation validates the length of a user-provided buffer containing a socketcan_frame object using only a NET_ASSERT statement in zcan_sendto_ctx() before dereferencing it in socketcan_to_can_frame(). In production builds where assertions are disabled, a userspace application that controls the length passed to a sendto syscall can supply an incomplete or truncated frame, causing socketcan_to_can_frame() to dereference fields beyond the end of the buffer. This results in an out-of-bounds read that can cause denial-of-service crashes or, because the parsed frame contents are transmitted on the network, leak adjacent memory.

A malicious / defective bluetooth controller can cause buffer overreads in the most functions that process HCI command responses.

A missing length validation in the Zephyr Bluetooth Host ISO receive path can be triggered by malformed HCI ISO data. In bt_iso_recv() (subsys/bluetooth/host/iso.c), when processing PB=START/SINGLE fragments, the code pulls a TS SDU header (8 bytes, ts=1) or a non-TS SDU header (4 bytes, ts=0) without first verifying that buf->len contains at least that many bytes. The outer HCI ISO length check in hci_iso() validates payload length consistency but not the minimum inner SDU header size, so a packet with payload length 1 passes hci_iso() and then reaches net_buf_pull_mem(), which asserts buf->len >= len. As a result, malformed ISO traffic deterministically triggers a kernel assert (denial of service) in assert-enabled builds, and in non-assert builds the same path may proceed with an undersized buffer, leading to out-of-bounds read behavior. The issue affects products using the Zephyr Host with CONFIG_BT_ISO_RX enabled, particularly where incoming HCI data can be influenced by a malicious or compromised controller or malformed forwarded ISO traffic.

Zephyr's ext2 directory-entry parser does not fully validate on-disk directory entry structure before copying the entry name and advancing traversal state. In ext2_fetch_direntry() (subsys/fs/ext2/ext2_diskops.c), the code only checks de_name_len <= EXT2_MAX_FILE_NAME and then copies the name with memcpy without validating the structural relationship between de_rec_len, de_name_len, and the directory block boundary (for example that de_rec_len is non-zero, at least the size of the entry header, and that the record fits within the block). Callers such as find_dir_entry() and ext2_get_direntry() (subsys/fs/ext2/ext2_impl.c) then advance traversal using the unvalidated de_rec_len. A crafted ext2 image can therefore cause an out-of-bounds read from the directory block buffer when a malformed entry near the end of a block triggers an oversized name copy, or a zero-progress infinite loop when de_rec_len == 0. The issue is not reached at mount time but later through directory traversal paths such as pathname lookup, stat/open/unlink/rename, and readdir. The primary impact is denial of service and out-of-bounds reads under attacker-controlled ext2 images mounted from untrusted media.

A malicious or malformed DNS packet without a payload can cause an out-of-bounds read, resulting in a crash (denial of service) or an incorrect computation.

A lack of input validation allows for out of bounds reads caused by malicious or malformed packets.

The function dns_copy_qname in dns_pack.c performs performs a memcpy operation with an untrusted field and does not check if the source buffer is large enough to contain the copied data.

In utf8_trunc in zephyr/lib/utils/utf8.c, last_byte_p can point to one byte before the string pointer if the string is empty.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

The facial recognition TA of some products has the out-of-bounds memory read vulnerability. Successful exploitation of this vulnerability may cause exceptions of the facial recognition service.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.

An out-of-bounds read in Organization Specific TLV was found in various versions of OpenvSwitch.

The RADIUS parser in tcpdump before 4.9.2 has a buffer over-read in print-radius.c:print_attr_string().

The NFS parser in tcpdump before 4.9.2 has a buffer over-read in print-nfs.c:xid_map_enter().

The ISAKMP parser in tcpdump before 4.9.2 has a buffer over-read in print-isakmp.c, several functions.

TensorFlow is an open source platform for machine learning. The security vulnerability results in FractionalMax(AVG)Pool with illegal pooling_ratio. Attackers using Tensorflow can exploit the vulnerability. They can access heap memory which is not in the control of user, leading to a crash or remote code execution. We have patched the issue in GitHub commit 216525144ee7c910296f5b05d214ca1327c9ce48. The fix will be included in TensorFlow 2.11.0. We will also cherry pick this commit on TensorFlow 2.10.1.

Apfloat v1.10.1 was discovered to contain a stack overflow via the component org.apfloat.internal.DoubleModMath::modPow(double. NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification.

phpgurukul News Portal Project V4.1 has File Upload Vulnerability via upload.php, which enables the upload of files of any format to the server without identity authentication.

Adobe Acrobat and Reader versions 2017.012.20098 and earlier, 2017.011.30066 and earlier, 2015.006.30355 and earlier, 11.0.22 and earlier have an exploitable out-of-bounds read vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

DexLoader function get_stringidx_fromdex() in Redex prior to commit 3b44c64 can load an out of bound address when loading the string index table, potentially allowing remote code execution during processing of a 3rd party Android APK file.

In Morgan Stanley Hobbes through 2020-05-21, the array implementation lacks bounds checking, allowing exploitation of an out-of-bounds (OOB) read/write vulnerability that leads to both local and remote code (via RPC) execution.

Mozilla developers Andrew McCreight, Nicolas B. Pierron, and the Mozilla Fuzzing Team reported memory safety bugs present in Firefox 100 and Firefox ESR 91.9. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Thunderbird < 91.10, Firefox < 101, and Firefox ESR < 91.10.

Istio is an open platform to connect, manage, and secure microservices. In affected versions ill-formed headers sent to Envoy in certain configurations can lead to unexpected memory access resulting in undefined behavior or crashing. Users are most likely at risk if they have an Istio ingress Gateway exposed to external traffic. This vulnerability has been resolved in versions 1.12.8, 1.13.5, and 1.14.1. Users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability regarding out-of-bounds read is found in the video interface. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.2.0-0525 may be affected: BC500, CC400W and TC500.

There exists an out of bounds read/write in LibJXL versions prior to commit 9cc451b91b74ba470fd72bd48c121e9f33d24c99. The JPEG decoder used by the JPEG XL encoder when doing JPEG recompression (i.e. if using JxlEncoderAddJPEGFrame on untrusted input) does not properly check bounds in the presence of incomplete codes. This could lead to an out-of-bounds write. In jpegli which is released as part of the same project, the same vulnerability is present. However, the relevant buffer is part of a bigger structure, and the code makes no assumptions on the values that could be overwritten. The issue could however cause jpegli to read uninitialised memory, or addresses of functions.

Memory safety bugs present in Firefox 131, Firefox ESR 128.3, and Thunderbird 128.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

The Treck TCP/IP stack before 6.0.1.66 has an ICMPv4 Out-of-bounds Read.

The Treck TCP/IP stack before 6.0.1.66 allows Remote Code execution via a single invalid DNS response.

Buffer overflow in POP servers based on BSD/Qualcomm's qpopper allows remote attackers to gain root access using a long PASS command.