DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow.

XML::Parser versions through 2.45 for Perl could overflow the pre-allocated buffer size cause a heap corruption (double free or corruption) and crashes. A :utf8 PerlIO layer, parse_stream() in Expat.xs could overflow the XML input buffer because Perl's read() returns decoded characters while SvPV() gives back multi-byte UTF-8 bytes that can exceed the pre-allocated buffer size. This can cause heap corruption (double free or corruption) and crashes.

A flaw was found in the vhost library in DPDK. Function vhost_user_set_inflight_fd() does not validate `msg->payload.inflight.num_queues`, possibly causing out-of-bounds memory read/write. Any software using DPDK vhost library may crash as a result of this vulnerability.

Any CA issuer in the RPKI can trick OctoRPKI prior to 1.3.0 into emitting an invalid VRP "MaxLength" value, causing RTR sessions to terminate. An attacker can use this to disable RPKI Origin Validation in a victim network (for example AS 13335 - Cloudflare) prior to launching a BGP hijack which during normal operations would be rejected as "RPKI invalid". Additionally, in certain deployments RTR session flapping in and of itself also could cause BGP routing churn, causing availability issues.

A bug affects the Linux kernel’s ksmbd NTLMv2 authentication and is known to crash the OS immediately in Linux-based systems.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the account parameter at /goform/addUserName.

A Stack-based buffer overflow vulnerability in the SonicOS allows a remote unauthenticated attacker to cause Denial of Service (DoS), which could cause an impacted firewall to crash.

Polipo through 1.1.1, when NDEBUG is used, allows a heap-based buffer overflow during parsing of a Range header. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A vulnerability was found in TRENDnet TEW-652BRP 3.04B01. It has been declared as critical. This vulnerability affects unknown code of the file cfg_op.ccp of the component Web Service. The manipulation leads to memory corruption. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-219958 is the identifier assigned to this vulnerability.

Qt 5.x before 5.15.6 and 6.x through 6.1.2 has an out-of-bounds write in QOutlineMapper::convertPath (called from QRasterPaintEngine::fill and QPaintEngineEx::stroke).

eprosima Fast DDS is a C++ implementation of the Data Distribution Service standard of the Object Management Group. Prior to versions 2.14.0, 2.13.4, 2.12.3, 2.10.4, and 2.6.8, manipulated DATA Submessage can cause a heap overflow error in the Fast-DDS process, causing the process to be terminated remotely. Additionally, the payload_size in the DATA Submessage packet is declared as uint32_t. When a negative number, such as -1, is input into this variable, it results in an Integer Overflow (for example, -1 gets converted to 0xFFFFFFFF). This eventually leads to a heap-buffer-overflow, causing the program to terminate. Versions 2.14.0, 2.13.4, 2.12.3, 2.10.4, and 2.6.8 contain a fix for this issue.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: always filter entire AP matrix The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration. Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following: guest's AP configuration (all also assigned to the mdev's matrix): 14.0004 14.0005 14.0006 16.0004 16.0005 16.0006 unassign domain 4 unbind queue 16.0005 assign domain 4 When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be: 14.0004 16.0004 Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through. To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix.

An issue was discovered in Squid before 4.10. Due to incorrect input validation, the NTLM authentication credentials parser in ext_lm_group_acl may write to memory outside the credentials buffer. On systems with memory access protections, this can result in the helper process being terminated unexpectedly. This leads to the Squid process also terminating and a denial of service for all clients using the proxy.

A Stack-based Buffer Overflow issue was discovered in Emerson Process Management ControlWave Micro Process Automation Controller: ControlWave Micro [ProConOS v.4.01.280] firmware: CWM v.05.78.00 and prior. A stack-based buffer overflow vulnerability caused by sending crafted packets on Port 20547 could force the PLC to change its state into halt mode.

Configuration defects in the secure OS module.Successful exploitation of this vulnerability will affect availability.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/SetIpBind.

Tenda AX12 v22.03.01.21_CN was discovered to contain a stack overflow via the ssid parameter at /goform/fast_setting_wifi_set .

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the SYSPS parameter at /goform/SysToolChangePwd.

Tenda AC15 V15.03.06.23 is vulnerable to Buffer Overflow via function formSetClientState.

There is a Out-of-Bound Write in the Allwinner R818 SoC Android Q SDK V1.0 camera driver "/dev/cedar_dev" through iotcl cmd IOCTL_SET_PROC_INFO and IOCTL_COPY_PROC_INFO, which could cause a system crash or EoP.

There is a Stack-based Buffer Overflow vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to device cannot be used properly.

Tenda A18 v15.13.07.09 was discovered to contain a stack overflow via the security_5g parameter at /goform/WifiBasicSet.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the editNameMit parameter at /goform/editFileName.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/L7Im.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the new_account parameter at /goform/editUserName.

Tenda TX9 Pro v22.03.02.10 was discovered to contain a stack overflow via the list parameter at /goform/SetIpMacBind.

Buffer overflow vulnerability in D-Link DI-7100G 2020-02-21 in the sub_451754 function of the jhttpd service in the viav4 parameter allowing attackers to cause a denial of service or execute arbitrary code.

Tenda Tenda AC6V1.0 V15.03.05.19 is affected by buffer overflow. Causes a denial of service (local).

An issue was discovered in SKALE sgxwallet 1.58.3. sgx_disp_ippsAES_GCMEncrypt allows an out-of-bounds write, resulting in a segfault and compromised enclave. This issue describes a buffer overflow, which was resolved prior to v1.77.0 and not reproducible in latest sgxwallet v1.77.0

There is an out of bounds write vulnerability in some Huawei products. The vulnerability is caused by a function of a module that does not properly verify input parameter. Successful exploit could cause out of bounds write leading to a denial of service condition.Affected product versions include:IPS Module V500R005C00,V500R005C20;NGFW Module V500R005C00;NIP6600 V500R005C00,V500R005C20;S12700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600,V200R013C00SPC500,V200R019C00SPC200,V200R019C00SPC500,V200R019C10SPC200,V200R020C00,V200R020C10;S1700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S2700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S5700 V200R010C00SPC600,V200R010C00SPC700,V200R011C10SPC500,V200R011C10SPC600,V200R019C00SPC500;S6700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S7700 V200R010C00SPC600,V200R010C00SPC700,V200R011C10SPC500,V200R011C10SPC600;S9700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;USG9500 V500R005C00,V500R005C20.

Buffer Overflow vulnerability in HDFGroup hdf5-h5dump 1.12.0 through 1.13.0 allows attackers to cause a denial of service via h5tools_str_sprint in /hdf5/tools/lib/h5tools_str.c.

A vulnerability has been identified in SINUMERIK 808D (All versions), SINUMERIK 828D (All versions < V4.95). Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial-of-service in the device.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/qossetting.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the opttype parameter at /goform/IPSECsave.

A stack overflow in the org.json.JSONTokener.nextValue::JSONTokener.java component of hutool-json v5.8.10 allows attackers to cause a Denial of Service (DoS) via crafted JSON or XML data.

When the database variable tm.tcpudptxchecksum is configured as non-default value Software-only on a BIG-IP system, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

hutool-json v5.8.10 was discovered to contain an out of memory error.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/SafeClientFilter.

A flaw was found in Caribou due to a regression of CVE-2020-25712 fix. An attacker could use this flaw to bypass screen-locking applications that leverage Caribou as an input mechanism. The highest threat from this vulnerability is to system availability.

A stack overflow in Jettison before v1.5.2 allows attackers to cause a Denial of Service (DoS) via crafted JSON data.

A stack overflow in the checkLoginUser function of TOTOLINK A720R A720R_Firmware v4.1.5cu.470_B20200911 allows attackers to cause a denial of service (DOS).

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the Go parameter at /goform/SafeMacFilter.

Tenda W6-S v1.0.0.4(510) was discovered to contain a stack overflow via the linkEn parameter at /goform/setAutoPing.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the cmdinput parameter at /goform/exeCommand.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/SafeEmailFilter.

A heap-based buffer overflow vulnerability was found in ImageMagick in versions prior to 7.0.11-14 in ReadTIFFImage() in coders/tiff.c. This issue is due to an incorrect setting of the pixel array size, which can lead to a crash and segmentation fault.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/webExcptypemanFilter.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the page parameter at /goform/P2pListFilter.

Tenda W6-S v1.0.0.4(510) was discovered to contain a stack overflow via the wl_radio parameter at /goform/WifiMacFilterGet.

Tenda W30E V1.0.1.25(633) was discovered to contain a stack overflow via the downaction parameter at /goform/CertListInfo.