Tanium addressed an insertion of sensitive information into log file vulnerability in Interact and TDS.

Tanium addressed an insertion of sensitive information into log file vulnerability in TanOS.

Tanium addressed an information disclosure vulnerability in Threat Response.

In JetBrains YouTrack before 2025.3.119033 access tokens could be exposed in Mailbox logs

Cloud Foundry Cloud Controller (CAPI), versions prior to 1.91.0, logs properties of background jobs when they are run, which may include sensitive information such as credentials if provided to the job. A malicious user with access to those logs may gain unauthorized access to resources protected by such credentials.

Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain an information disclosure vulnerability. Authenticated low privileged OMIMSCC users may be able to retrieve sensitive information from the logs.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.2 and 5.2.0.0 through 5.2.6.5 stores potentially sensitive information in log files that could be read by an authenticatedl user. IBM X-Force ID: 186284.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 discloses highly sensitive information in plain text in the virgo log file which could be used in further attacks against the system. IBM X-Force ID: 181779.

Dell PowerScale OneFS 9.5.0.x, contains an insertion of sensitive information into log file vulnerability in SNMPv3. A low privileges user could potentially exploit this vulnerability, leading to information disclosure.

A vulnerability in the CLI of Cisco AsyncOS for Cisco Email Security Appliance (ESA) and Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to excessive verbosity in certain log subscriptions. An attacker could exploit this vulnerability by accessing specific log files on an affected device. A successful exploit could allow the attacker to obtain sensitive log data, which may include user credentials. To exploit this vulnerability, the attacker would need to have valid credentials at the operator level or higher on the affected device.

A vulnerability has been identified in Climatix POL909 (AWB module) (All versions < V11.44), Climatix POL909 (AWM module) (All versions < V11.36). The handling of log files in the web application of affected devices contains an information disclosure vulnerability which could allow logged in users to access sensitive files.

The Brocade Fabric OS Commands “configupload” and “configdownload” before Brocade Fabric OS v9.1.1c, v8.2.3d, v9.2.0 print scp, sftp, ftp servers passwords in supportsave. This could allow a remote authenticated attacker to access sensitive information.

CloverDX before 5.17.3 writes passwords to the audit log in certain situations, if the audit log is enabled and single sign-on is not employed. The fixed versions are 5.15.4, 5.16.2, 5.17.3, and 6.0.x.

Retool (self-hosted enterprise) through 3.40.0 inserts resource authentication credentials into sent data. Credentials for users with "Use" permissions can be discovered (by an authenticated attacker) via the /api/resources endpoint. The earliest affected version is 3.18.1.

In JetBrains TeamCity before 2024.07 parameters of the "password" type could leak into the build log in some specific cases

An insertion of sensitive information into log file vulnerabilities [CWE-532] in FortiManager version 7.4.0, version 7.2.3 and below, version 7.0.8 and below, version 6.4.12 and below, version 6.2.11 and below and FortiAnalyzer version 7.4.0, version 7.2.3 and below, version 7.0.8 and below, version 6.4.12 and below, version 6.2.11 and below eventlog may allow any low privileged user with access to event log section to retrieve certificate private key and encrypted password logged as system log.

In SonarQube before 10.4 and 9.9.4 LTA, encrypted values generated using the Settings Encryption feature are potentially exposed in cleartext as part of the URL parameters in the logs (such as SonarQube Access Logs, Proxy Logs, etc).

IBM Business Automation Workflow 22.0.2, 23.0.1, 23.0.2, and 24.0.0 stores potentially sensitive information in log files under certain situations that could be read by an authenticated user. IBM X-Force ID: 284868.

APM server logs contain document body from a partially failed bulk index request. For example, in case of unavailable_shards_exception for a specific document, since the ES response line contains the document body, and that APM server logs the ES response line on error, the document is effectively logged.

An issue was discovered whereby Elastic Agent will leak secrets from the agent policy elastic-agent.yml only when the log level is configured to debug. By default the log level is set to info, where no leak occurs.

Insertion of Sensitive Information into Log File vulnerability in upKeeper Solutions upKeeper Manager allows Use of Known Domain Credentials.This issue affects upKeeper Manager: from 5.0.0 before 5.2.12.

Brocade Fabric OS versions before Brocade Fabric OS v7.4.2g could allow an authenticated, remote attacker to view a user password in cleartext. The vulnerability is due to incorrectly logging the user password in log files.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a vulnerability involving an insecure direct object reference of log files of the Import/Export feature. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

An insertion of sensitive information into log file vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4 and FortiProxy 7.0.0 through 7.0.10. 7.2.0 through 7.2.1 allows an attacker to read certain passwords in plain text.

Veracode Scan Jenkins Plugin before 23.3.19.0, when the "Connect using proxy" option is enabled and configured with proxy credentials and when the Jenkins global system setting debug is enabled and when a scan is configured for remote agent jobs, allows users (with access to view the job log) to discover proxy credentials.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All versions of Argo CD starting with v2.6.0-rc1 have an output sanitization bug which leaks repository access credentials in error messages. These error messages are visible to the user, and they are logged. The error message is visible when a user attempts to create or update an Application via the Argo CD API (and therefor the UI or CLI). The user must have `applications, create` or `applications, update` RBAC access to reach the code which may produce the error. The user is not guaranteed to be able to trigger the error message. They may attempt to spam the API with requests to trigger a rate limit error from the upstream repository. If the user has `repositories, update` access, they may edit an existing repository to introduce a URL typo or otherwise force an error message. But if they have that level of access, they are probably intended to have access to the credentials anyway. A patch for this vulnerability has been released in version 2.6.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.1), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.1), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.1), SCALANCE M812-1 ADSL-Router family (All versions < V8.1), SCALANCE M816-1 ADSL-Router family (All versions < V8.1), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.1), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.1), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.1), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.1), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.1), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.1), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.1), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.1), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.1), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.1), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.1), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.1), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.1), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.1), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.1), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.1), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.1). Affected devices insert sensitive information about the generation of 2FA tokens into log files. This could allow an authenticated remote attacker to forge 2FA tokens of other users.

In Octopus Deploy 2018.8.0 through 2019.x before 2019.12.2, an authenticated user with could trigger a deployment that leaks the Helm Chart repository password.

The VMware Tanzu Application Service for VMs and Isolation Segment contain an information disclosure vulnerability due to the logging of credentials in hex encoding in platform system audit logs. A malicious non-admin user who has access to the platform system audit logs can access hex encoded CF API admin credentials and can push new malicious versions of an application. In a default deployment non-admin users do not have access to the platform system audit logs.

IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.18 could disclose sensitive user credentials in log files.

A vulnerability in the logging component of Cisco Duo Authentication Proxy could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability exists because certain unencrypted credentials are stored. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to view sensitive information in clear text.

Potential Insertion of Sensitive Information into Jetty Log Files in multiple versions of OpenNMS Meridian and Horizon could allow disclosure of usernames and passwords if the logging level is set to debug. Users should upgrade to Meridian 2023.1.0 or newer, or Horizon 31.0.4. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet.

A vulnerability. When org.apache.linkis.metadata.util.HiveUtils.decode() fails to perform Base64 decoding, it records the complete input parameter string in the log via logger.error(str + "decode failed", e). If the input parameter contains sensitive information such as Hive Metastore keys, plaintext passwords will be left in the log files when decoding fails, resulting in information leakage. Affected Scope Component: Sensitive fields in hive-site.xml (e.g., javax.jdo.option.ConnectionPassword) or other fields encoded in Base64. Version: Apache Linkis 1.0.0 – 1.7.0 Trigger Conditions The value of the configuration item is an invalid Base64 string. Log files are readable by users other than hive-site.xml administrators. Severity: Low The probability of Base64 decoding failure is low. The leakage is only triggered when logs at the Error level are exposed. Remediation Apache Linkis 1.8.0 and later versions have replaced the log with desensitized content. logger.error("URL decode failed: {}", e.getMessage()); // 不再输出 str Users are recommended to upgrade to version 1.8.0, which fixes the issue.

Insertion of sensitive information into log file vulnerability in proxy settings component in Synology Drive Client before 3.3.0-15082 allows remote authenticated users to obtain sensitive information via unspecified vectors.

An exposure of sensitive information to an unauthorized actor vulnerability in Fortinet FortiADC 7.4.0, FortiADC 7.2 all versions, FortiADC 7.1 all versions, FortiADC 7.0 all versions, FortiADC 6.2 all versions may allow an admin with read-only permission to get the external resources password via the logs of the product

An insertion of sensitive information into log file vulnerability [CWE-532] in the FortiPortal management interface 7.0.0 through 7.0.2 may allow a remote authenticated attacker to read other devices' passwords in the audit log page.

Hitachi Vantara Pentaho Business Analytics Server versions before 9.4.0.0 and 9.3.0.1, including 8.3.x with the Big Data Plugin expose the username and password of clusters in clear text into system logs. 

TYPO3 is an open source PHP based web content management system. In versions 9.0.0 through 9.5.27, 10.0.0 through 10.4.17, and 11.0.0 through 11.3.0, user credentials may been logged as plain-text. This occurs when explicitly using log level debug, which is not the default configuration. TYPO3 versions 9.5.28, 10.4.18, 11.3.1 contain a patch for this vulnerability.

IBM Spectrum Virtualize 8.3, 8.4, and 8.5 could disclose SNMPv3 server credentials to an authenticated user in log files. IBM X-Force ID: 239540.

An insertion of sensitive information into log file vulnerability exists in PcVue versions 15 through 15.2.2. This could allow a user with access to the log files to discover connection strings of data sources configured for the DbConnect, which could include credentials. Successful exploitation of this vulnerability could allow other users unauthorized access to the underlying data sources.

An information disclosure vulnerability in B&R GateManager 4260 and 9250 versions <9.0.20262 and GateManager 8250 versions <9.2.620236042 allows authenticated users to view information of devices belonging to foreign domains.

In JetBrains TeamCity version before 2022.10, Password parameters could be exposed in the build log if they contained special characters

Insertion of Sensitive Information into Log File vulnerability in the Apache Solr Operator. This issue affects all versions of the Apache Solr Operator from 0.3.0 through 0.8.0. When asked to bootstrap Solr security, the operator will enable basic authentication and create several accounts for accessing Solr: including the "solr" and "admin" accounts for use by end-users, and a "k8s-oper" account which the operator uses for its own requests to Solr. One common source of these operator requests is healthchecks: liveness, readiness, and startup probes are all used to determine Solr's health and ability to receive traffic. By default, the operator configures the Solr APIs used for these probes to be exempt from authentication, but users may specifically request that authentication be required on probe endpoints as well. Whenever one of these probes would fail, if authentication was in use, the Solr Operator would create a Kubernetes "event" containing the username and password of the "k8s-oper" account. Within the affected version range, this vulnerability affects any solrcloud resource which (1) bootstrapped security through use of the `.solrOptions.security.authenticationType=basic` option, and (2) required authentication be used on probes by setting `.solrOptions.security.probesRequireAuth=true`. Users are recommended to upgrade to Solr Operator version 0.8.1, which fixes this issue by ensuring that probes no longer print the credentials used for Solr requests.  Users may also mitigate the vulnerability by disabling authentication on their healthcheck probes using the setting `.solrOptions.security.probesRequireAuth=false`.

The Yii 2 Redis extension provides the redis key-value store support for the Yii framework 2.0. On failing connection, the extension writes commands sequence to logs. Prior to version 2.0.20, AUTH parameters are written in plain text exposing username and password. That might be an issue if attacker has access to logs. Version 2.0.20 fixes the issue.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to view a password in clear text. The vulnerability is due to incorrectly logging the admin password when a user is forced to modify the default password when logging in to the web portal for the first time. Subsequent password changes are not logged and other accounts are not affected. An attacker could exploit this vulnerability by viewing the admin clear text password and using it to access the affected system. The attacker would need a valid user account to exploit this vulnerability.

Apache Pulsar contains multiple connectors for integrating with Apache Kafka. The Pulsar IO Apache Kafka Source Connector, Sink Connector, and Kafka Connect Adaptor Sink Connector log sensitive configuration properties in plain text in application logs. This vulnerability can lead to unintended exposure of credentials in log files, potentially allowing attackers with access to these logs to obtain Apache Kafka credentials. The vulnerability's impact is limited by the fact that an attacker would need access to the application logs to exploit this issue. This issue affects Apache Pulsar IO's Apache Kafka connectors in all versions before 3.0.11, 3.3.6, and 4.0.4. 3.0.x version users should upgrade to at least 3.0.11. 3.3.x version users should upgrade to at least 3.3.6. 4.0.x version users should upgrade to at least 4.0.4. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

An information exposure vulnerability in Fortinet FortiWeb 6.2.0 CLI and earlier may allow an authenticated user to view sensitive information being logged via diagnose debug commands.

On BIG-IP 13.1.0-13.1.1.4, sensitive information is logged into the local log files and/or remote logging targets when restjavad processes an invalid request. Users with access to the log files would be able to view that data.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.864 allows an attacker to get a victim's session file name from /home/[USERNAME]/tmp/session/sess_xxxxxx, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to gain access to the victim's password (for the OS and phpMyAdmin) via an attacker account. This is different from CVE-2019-14782.

A vulnerability was found in Red Hat OpenShift Jenkins. The bearer token is not obfuscated in the logs and potentially carries a high risk if those logs are centralized when collected. The token is typically valid for one year. This flaw allows a malicious user to jeopardize the environment if they have access to sensitive information.