An issue was discovered by Elastic whereby sensitive information may be recorded in Kibana logs in the event of an error or in the event where debug level logging is enabled in Kibana. Elastic has released Kibana 8.11.2 which resolves this issue. The messages recorded in the log may contain Account credentials for the kibana_system user, API Keys, and credentials of Kibana end-users, Elastic Security package policy objects which can contain private keys, bearer token, and sessions of 3rd-party integrations and finally Authorization headers, client secrets, local file paths, and stack traces. The issue may occur in any Kibana instance running an affected version that could potentially receive an unexpected error when communicating to Elasticsearch causing it to include sensitive data into Kibana error logs. It could also occur under specific circumstances when debug level logging is enabled in Kibana. Note: It was found that the fix for ESA-2023-25 in Kibana 8.11.1 for a similar issue was incomplete.

Brocade Fabric OS versions before Brocade Fabric OS v7.4.2g could allow an authenticated, remote attacker to view a user password in cleartext. The vulnerability is due to incorrectly logging the user password in log files.

In JetBrains TeamCity before 2024.07 parameters of the "password" type could leak into the build log in some specific cases

Retool (self-hosted enterprise) through 3.40.0 inserts resource authentication credentials into sent data. Credentials for users with "Use" permissions can be discovered (by an authenticated attacker) via the /api/resources endpoint. The earliest affected version is 3.18.1.

CubeFS is an open-source cloud-native file storage system. CubeFS prior to version 3.3.1 was found to leak users secret keys and access keys in the logs in multiple components. When CubeCS creates new users, it leaks the users secret key. This could allow a lower-privileged user with access to the logs to retrieve sensitive information and impersonate other users with higher privileges than themselves. The issue has been patched in v3.3.1. There is no other mitigation than upgrading CubeFS.

An insertion of sensitive information into log file vulnerabilities [CWE-532] in FortiManager version 7.4.0, version 7.2.3 and below, version 7.0.8 and below, version 6.4.12 and below, version 6.2.11 and below and FortiAnalyzer version 7.4.0, version 7.2.3 and below, version 7.0.8 and below, version 6.4.12 and below, version 6.2.11 and below eventlog may allow any low privileged user with access to event log section to retrieve certificate private key and encrypted password logged as system log.

IBM Business Automation Workflow 22.0.2, 23.0.1, 23.0.2, and 24.0.0 stores potentially sensitive information in log files under certain situations that could be read by an authenticated user. IBM X-Force ID: 284868.

TYPO3 is an open source PHP based web content management system. In versions 9.0.0 through 9.5.27, 10.0.0 through 10.4.17, and 11.0.0 through 11.3.0, user credentials may been logged as plain-text. This occurs when explicitly using log level debug, which is not the default configuration. TYPO3 versions 9.5.28, 10.4.18, 11.3.1 contain a patch for this vulnerability.

APM server logs contain document body from a partially failed bulk index request. For example, in case of unavailable_shards_exception for a specific document, since the ES response line contains the document body, and that APM server logs the ES response line on error, the document is effectively logged.

In Cloudera Data Engineering (CDE) 1.3.0, JWT authentication tokens are exposed to administrators in virtual cluster server logs.

Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Vela pipelines can use variable substitution combined with insensitive fields like `parameters`, `image` and `entrypoint` to inject secrets into a plugin/image and — by using common substitution string manipulation — can bypass log masking and expose secrets without the use of the commands block. This unexpected behavior primarily impacts secrets restricted by the "no commands" option. This can lead to unintended use of the secret value, and increased risk of exposing the secret during image execution bypassing log masking. **To exploit this** the pipeline author must be supplying the secrets to a plugin that is designed in such a way that will print those parameters in logs. Plugin parameters are not designed for sensitive values and are often intentionally printed throughout execution for informational/debugging purposes. Parameters should therefore be treated as insensitive. While Vela provides secrets masking, secrets exposure is not entirely solved by the masking process. A docker image (plugin) can easily expose secrets if they are not handled properly, or altered in some way. There is a responsibility on the end-user to understand how values injected into a plugin are used. This is a risk that exists for many CICD systems (like GitHub Actions) that handle sensitive runtime variables. Rather, the greater risk is that users who restrict a secret to the "no commands" option and use image restriction can still have their secret value exposed via substitution tinkering, which turns the image and command restrictions into a false sense of security. This issue has been addressed in version 0.23.2. Users are advised to upgrade. Users unable to upgrade should not provide sensitive values to plugins that can potentially expose them, especially in `parameters` that are not intended to be used for sensitive values, ensure plugins (especially those that utilize shared secrets) follow best practices to avoid logging parameters that are expected to be sensitive, minimize secrets with `pull_request` events enabled, as this allows users to change pipeline configurations and pull in secrets to steps not typically part of the CI process, make use of the build approval setting, restricting builds from untrusted users, and limit use of shared secrets, as they are less restrictive to access by nature.

Jenkins MQ Notifier Plugin 1.4.0 and earlier logs potentially sensitive build parameters as part of debug information in build logs by default.

IBM InfoSphere Information Server 11.7 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 280361.

A clear text storage of sensitive information into log file vulnerability in FortiADCManager 5.3.0 and below, 5.2.1 and below and FortiADC 5.3.7 and below may allow a remote authenticated attacker to read other local users' password in log files.

Information Disclosure vulnerability in McAfee Advanced Threat Defense (ATD) prior to 4.8 allows remote authenticated attackers to gain access to hashed credentials via carefully constructed POST request extracting incorrectly recorded data from log files.

In affected versions of the Octopus Kubernetes worker or agent, sensitive variables could be written to the Kubernetes script pod log in clear-text. This was identified in Version 2 however it was determined that this could also be achieved in Version 1 and the fix was applied to both versions accordingly.

An information disclosure vulnerability exists in Yugabyte Anywhere, where the LDAP bind password is logged in plaintext within application logs. This flaw results in the unintentional exposure of sensitive information in Yugabyte Anywhere logs, potentially allowing unauthorized users with access to these logs to view the LDAP bind password. An attacker with log access could exploit this vulnerability to gain unauthorized access to the LDAP server, leading to potential exposure or compromise of LDAP-managed resources This issue affects YugabyteDB Anywhere: from 2.20.0.0 before 2.20.7.0, from 2.23.0.0 before 2.23.1.0, from 2024.1.0.0 before 2024.1.3.0.

All versions of Apache Santuario - XML Security for Java prior to 2.2.6, 2.3.4, and 3.0.3, when using the JSR 105 API, are vulnerable to an issue where a private key may be disclosed in log files when generating an XML Signature and logging with debug level is enabled. Users are recommended to upgrade to version 2.2.6, 2.3.4, or 3.0.3, which fixes this issue.

Vault and Vault Enterprise (“Vault”) may expose sensitive information when enabling an audit device which specifies the `log_raw` option, which may log sensitive information to other audit devices, regardless of whether they are configured to use `log_raw`.

An issue was discovered by Elastic whereby Elastic Agent would log a raw event in its own logs at the WARN or ERROR level if ingesting that event to Elasticsearch failed with any 4xx HTTP status code except 409 or 429. Depending on the nature of the event that Elastic Agent attempted to ingest, this could lead to the insertion of sensitive or private information in the Elastic Agent logs. Elastic has released 8.11.3 and 7.17.16 that prevents this issue by limiting these types of logs to DEBUG level logging, which is disabled by default.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to view a password in clear text. The vulnerability is due to incorrectly logging the admin password when a user is forced to modify the default password when logging in to the web portal for the first time. Subsequent password changes are not logged and other accounts are not affected. An attacker could exploit this vulnerability by viewing the admin clear text password and using it to access the affected system. The attacker would need a valid user account to exploit this vulnerability.

OpenShift Container Platform 4 does not sanitize secret data written to static pod logs when the log level in a given operator is set to Debug or higher. A low privileged user could read pod logs to discover secret material if the log level has already been modified in an operator by a privileged user.

Ansible, versions 2.9.x before 2.9.1, 2.8.x before 2.8.7 and Ansible versions 2.7.x before 2.7.15, is not respecting the flag no_log set it to True when Sumologic and Splunk callback plugins are used send tasks results events to collectors. This would discloses and collects any sensitive data.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.864 allows an attacker to get a victim's session file name from /home/[USERNAME]/tmp/session/sess_xxxxxx, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to gain access to the victim's password (for the OS and phpMyAdmin) via an attacker account. This is different from CVE-2019-14782.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.856 through 0.9.8.864 allows an attacker to get a victim's session file name from the /tmp directory, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to make a request to extract the victim's password (for the OS and phpMyAdmin) via an attacker account.

Improper restriction of environment variables in Elastic Defend can lead to exposure of sensitive information such as API keys and tokens via automatic transmission of unfiltered environment variables to the stack.

CodeIgniter Shield is an authentication and authorization provider for CodeIgniter 4. In affected versions successful login attempts are recorded with the raw tokens stored in the log table. If a malicious person somehow views the data in the log table they can obtain a raw token which can then be used to send a request with that user's authority. This issue has been addressed in version 1.0.0-beta.8. Users are advised to upgrade. Users unable to upgrade should disable logging for successful login attempts by the configuration files.

An information exposure vulnerability in Fortinet FortiWeb 6.2.0 CLI and earlier may allow an authenticated user to view sensitive information being logged via diagnose debug commands.

An issue was discovered in GitLab Community and Enterprise Edition 9.x, 10.x, and 11.x before 11.8.9, 11.9.x before 11.9.10, and 11.10.x before 11.10.2. Gitaly has allows an information disclosure issue where HTTP/GIT credentials are included in logs on connection errors.

Pivotal Ops Manager, versions 2.4.x prior to 2.4.27, 2.5.x prior to 2.5.24, 2.6.x prior to 2.6.16, and 2.7.x prior to 2.7.5, logs all query parameters to tomcat’s access file. If the query parameters are used to provide authentication, ie. credentials, then they will be logged as well.

The Kubernetes client-go library logs request headers at verbosity levels of 7 or higher. This can disclose credentials to unauthorized users via logs or command output. Kubernetes components (such as kube-apiserver) prior to v1.16.0, which make use of basic or bearer token authentication, and run at high verbosity levels, are affected.

OpenShift Container Platform, versions 4.1 and 4.2, does not sanitize secret data written to pod logs when the log level in a given operator is set to Debug or higher. A low privileged user could read pod logs to discover secret material if the log level has already been modified in an operator by a privileged user.

A flaw was found in IPA, all 4.6.x versions before 4.6.7, all 4.7.x versions before 4.7.4 and all 4.8.x versions before 4.8.3, in the way that FreeIPA's batch processing API logged operations. This included passing user passwords in clear text on FreeIPA masters. Batch processing of commands with passwords as arguments or options is not performed by default in FreeIPA but is possible by third-party components. An attacker having access to system logs on FreeIPA masters could use this flaw to produce log file content with passwords exposed.

Laf is a cloud development platform. In the Laf version design, the log uses communication with k8s to quickly retrieve logs from the container without the need for additional storage. However, in version 1.0.0-beta.13 and prior, this interface does not verify the permissions of the pod, which allows authenticated users to obtain any pod logs under the same namespace through this method, thereby obtaining sensitive information printed in the logs. As of time of publication, no known patched versions exist.

Jenkins Maven Integration Plugin 3.3 and earlier did not apply build log decorators to module builds, potentially revealing sensitive build variables in the build log.

An issue was discovered by Elastic whereby Watcher search input logged the search query results on DEBUG log level. This could lead to raw contents of documents stored in Elasticsearch to be printed in logs. Elastic has released 8.11.2 and 7.17.16 that resolves this issue by removing this excessive logging. This issue only affects users that use Watcher and have a Watch defined that uses the search input and additionally have set the search input’s logger to DEBUG or finer, for example using: org.elasticsearch.xpack.watcher.input.search, org.elasticsearch.xpack.watcher.input, org.elasticsearch.xpack.watcher, or wider, since the loggers are hierarchical.

Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain an information disclosure vulnerability. Authenticated low privileged OMIMSCC users may be able to retrieve sensitive information from the logs.

Cloud Foundry Cloud Controller (CAPI), versions prior to 1.91.0, logs properties of background jobs when they are run, which may include sensitive information such as credentials if provided to the job. A malicious user with access to those logs may gain unauthorized access to resources protected by such credentials.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a vulnerability involving an insecure direct object reference of log files of the Import/Export feature. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 discloses highly sensitive information in plain text in the virgo log file which could be used in further attacks against the system. IBM X-Force ID: 181779.

An issue was discovered by Elastic whereby Beats and Elastic Agent would log a raw event in its own logs at the WARN or ERROR level if ingesting that event to Elasticsearch failed with any 4xx HTTP status code except 409 or 429. Depending on the nature of the event that Beats or Elastic Agent attempted to ingest, this could lead to the insertion of sensitive or private information in the Beats or Elastic Agent logs. Elastic has released 8.11.3 and 7.17.16 that prevents this issue by limiting these types of logs to DEBUG level logging, which is disabled by default.

Planning Analytics Cartridge for Cloud Pak for Data 4.0 exposes sensitive information in logs which could lead an attacker to exploit this vulnerability to conduct further attacks. IBM X-Force ID: 247896.

Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue.

An insertion of sensitive information into log file vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4 and FortiProxy 7.0.0 through 7.0.10. 7.2.0 through 7.2.1 allows an attacker to read certain passwords in plain text.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.2 and 5.2.0.0 through 5.2.6.5 stores potentially sensitive information in log files that could be read by an authenticatedl user. IBM X-Force ID: 186284.

Shopware is an open source commerce platform based on Symfony Framework and Vue js. In affected versions the log module would write out all kind of sent mails. An attacker with access to either the local system logs or a centralized logging store may have access to other users accounts. This issue has been addressed in version 6.4.18.1. For older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin. For the full range of functions, we recommend updating to the latest Shopware version. Users unable to upgrade may remove from all users the log module ACL rights or disable logging.

An issue was discovered by Elastic whereby the Documents API of App Search logged the raw contents of indexed documents at INFO log level. Depending on the contents of such documents, this could lead to the insertion of sensitive or private information in the App Search logs. Elastic has released 8.11.2 and 7.17.16 that resolves this issue by changing the log level at which these are logged to DEBUG, which is disabled by default.

Insertion of Sensitive Information into Log File vulnerability in the Apache Solr Operator. This issue affects all versions of the Apache Solr Operator from 0.3.0 through 0.8.0. When asked to bootstrap Solr security, the operator will enable basic authentication and create several accounts for accessing Solr: including the "solr" and "admin" accounts for use by end-users, and a "k8s-oper" account which the operator uses for its own requests to Solr. One common source of these operator requests is healthchecks: liveness, readiness, and startup probes are all used to determine Solr's health and ability to receive traffic. By default, the operator configures the Solr APIs used for these probes to be exempt from authentication, but users may specifically request that authentication be required on probe endpoints as well. Whenever one of these probes would fail, if authentication was in use, the Solr Operator would create a Kubernetes "event" containing the username and password of the "k8s-oper" account. Within the affected version range, this vulnerability affects any solrcloud resource which (1) bootstrapped security through use of the `.solrOptions.security.authenticationType=basic` option, and (2) required authentication be used on probes by setting `.solrOptions.security.probesRequireAuth=true`. Users are recommended to upgrade to Solr Operator version 0.8.1, which fixes this issue by ensuring that probes no longer print the credentials used for Solr requests.  Users may also mitigate the vulnerability by disabling authentication on their healthcheck probes using the setting `.solrOptions.security.probesRequireAuth=false`.

The VMware Tanzu Application Service for VMs and Isolation Segment contain an information disclosure vulnerability due to the logging of credentials in hex encoding in platform system audit logs. A malicious non-admin user who has access to the platform system audit logs can access hex encoded CF API admin credentials and can push new malicious versions of an application. In a default deployment non-admin users do not have access to the platform system audit logs.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.1), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.1), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.1), SCALANCE M812-1 ADSL-Router family (All versions < V8.1), SCALANCE M816-1 ADSL-Router family (All versions < V8.1), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.1), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.1), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.1), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.1), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.1), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.1), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.1), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.1), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.1), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.1), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.1), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.1), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.1), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.1), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.1), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.1), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.1). Affected devices insert sensitive information about the generation of 2FA tokens into log files. This could allow an authenticated remote attacker to forge 2FA tokens of other users.