Out-Of-Bounds Read vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

An Out-Of-Bounds Read vulnerability affecting the PAR file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted PAR file.

Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, IPT, JT, SAT, STL, STP, X_B or X_T file. NOTE: CVE-2024-3298 and CVE-2024-3299 were SPLIT from this ID.

Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file.

Use-After-Free vulnerability exists in the SLDPRT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.

An Out-Of-Bounds Write vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file.

A Heap-based Buffer Overflow vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file.

A Use of Uninitialized Variable vulnerability affecting the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

A Use After Free vulnerability affecting the PAR file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted PAR file.

Out-Of-Bounds Write and Type Confusion vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF. NOTE: this vulnerability was SPLIT from CVE-2024-1847.

Out-Of-Bounds Write, Use of Uninitialized Resource and Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted SLDDRW or SLDPRT file. NOTE: this vulnerability was SPLIT from CVE-2024-1847.

A Use of Uninitialized Variable vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file.

An Out-Of-Bounds Write vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file.

Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file.

Use After Free vulnerability exists in the IPT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted IPT file.

Use After Free vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

Use of Uninitialized Variable vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file.

Heap-based Buffer Overflow and Uninitialized Variable vulnerabilities exist in the X_B and SAT file reading procedure in eDrawings from Release SOLIDWORKS 2024 through Release SOLIDWORKS 2025. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted X_B or SAT file.

Use-After-Free, Out-of-bounds Write and Heap-based Buffer Overflow vulnerabilities exist in the DWG and DXF file reading procedure in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF file.

A Use-After-Free vulnerability in SLDPRT file reading procedure exists in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.

Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJ file.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley View 10.15.0.75. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of J2K images. Crafted data in a J2K image can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15456.

Bentley MicroStation CONNECT 10.16.0.80 J2K File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of J2K images. Crafted data in a J2K image can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15408.

PDF-XChange Editor App Object Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of App objects. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20848.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JT files. Crafted data in a JT file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-14990.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of J2K images. Crafted data in a J2K image can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15416.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DGN files. Crafted data in a DGN file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15508.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JT files. Crafted data in a JT file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15384.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JT files. Crafted data in a JT file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15385.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley View 10.15.0.75. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DGN file. Crafted data in a DNG file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15513.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. Crafted data in a PDF file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15406.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. Crafted data in a PDF file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15413.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JT files. Crafted data in a JT file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-14987.

A maliciously crafted DWFX file, when parsed through Autodesk Navisworks, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A maliciously crafted DWFX file, when parsed through Autodesk Navisworks, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A vulnerability has been identified in JT Utilities (All versions < V13.1.1.0), JTTK (All versions < V11.1.1.0). JTTK library in affected products is vulnerable to an out of bounds read past the end of an allocated buffer when parsing specially crafted JT files. An attacker could leverage this vulnerability to leak information in the context of the current process. (ZDI-CAN-14908)

This vulnerability allows remote attackers to disclose sensitive information on affected installations of Foxit Studio Photo 3.6.6.922. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of CR2 files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-11434.

A maliciously crafted MODEL file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A maliciously crafted CATPART file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A maliciously crafted MODEL file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

An out-of-bounds read vulnerability exists when reading a TIF file using Open Design Alliance Drawings SDK before 2022.12. The specific issue exists after loading TIF files. An unchecked input data from a crafted TIF file leads to an out-of-bounds read. An attacker can leverage this vulnerability to execute code in the context of the current process.

A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A heap-based buffer over-read was discovered in the get_le32 function in bele.h in UPX 4.0.0 via a crafted Mach-O file.

An out-of-bounds read vulnerability exists when reading a BMP file using Open Design Alliance (ODA) Drawings Explorer before 2022.12. The specific issue exists after loading BMP files. Unchecked input data from a crafted BMP file leads to an out-of-bounds read. An attacker can leverage this vulnerability to execute code in the context of the current process.

A vulnerability has been identified in JT Utilities (All versions < V12.8.1.1), JTTK (All versions < V10.8.1.1). JTTK library in affected products is vulnerable to an out of bounds read past the end of an allocated buffer when parsing JT files. An attacker could leverage this vulnerability to leak information in the context of the current process. (ZDI-CAN-15055, ZDI-CAN-14915, ZDI-CAN-14865)

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit Studio Photo 3.6.6.916. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of TIF files from the GetTIFPalette method. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9931.

An out-of-bounds read vulnerability exists when reading a TGA file using Open Design Alliance Drawings SDK before 2022.12. The specific issue exists after loading TGA files. An unchecked input data from a crafted TGA file leads to an out-of-bounds read. An attacker can leverage this vulnerability to execute code in the context of the current process.

A heap-based buffer over-read was discovered in the invert_pt_dynamic function in p_lx_elf.cpp in UPX 4.0.0 via a crafted Mach-O file.

A vulnerability in the JPEG image parsing module in DaView Indy, DaVa+, DaOffice softwares could allow an unauthenticated, remote attacker to cause an arbitrary code execution on an affected device.nThe vulnerability is due to a stack overflow read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device.