Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS.
A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by sending a malformed Flexible NetFlow Version 9 packet to the Control and Provisioning of Wireless Access Points (CAPWAP) data port of an affected device. An exploit could allow the attacker to trigger an infinite loop, resulting in a process crash that would cause a reload of the device.
A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.
A vulnerability in the Two-Way Active Measurement Protocol (TWAMP) server feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. For Cisco IOS XR Software, this vulnerability could cause the ipsla_ippm_server process to reload unexpectedly if debugs are enabled. This vulnerability is due to out-of-bounds array access when processing specially crafted TWAMP control packets. An attacker could exploit this vulnerability by sending crafted TWAMP control packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: For Cisco IOS XR Software, only the ipsla_ippm_server process reloads unexpectedly and only when debugs are enabled. The vulnerability details for Cisco IOS XR Software are as follows: Security Impact Rating (SIR): Low CVSS Base Score: 3.7 CVSS Vector: CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L
A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an authenticated, remote attacker to inject arbitrary HTML content into a device-generated document. This vulnerability is due to improper validation of user-supplied data. An attacker could exploit this vulnerability by submitting malicious content to an affected device and using the device to generate a document that contains sensitive information. A successful exploit could allow the attacker to alter the standard layout of the device-generated documents, read arbitrary files from the underlying operating system, and conduct server-side request forgery (SSRF) attacks. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Security Analyst (Read Only).
A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.
A vulnerability in the Spam Quarantine feature of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Email and Web Manager could allow an unauthenticated, remote attacker to execute arbitrary system commands on an affected device with root privileges. This vulnerability is due to insufficient validation of HTTP requests by the Spam Quarantine feature. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.
A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.
A vulnerability in a policy-based Cisco Application Visibility and Control (AVC) implementation of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to evade the antivirus scanner and download a malicious file onto an endpoint. The vulnerability is due to improper handling of a crafted range request header. An attacker could exploit this vulnerability by sending an HTTP request with a crafted range request header through the affected device. A successful exploit could allow the attacker to evade the antivirus scanner and download malware onto the endpoint without detection by Cisco Secure Web Appliance.
A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit.
A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload.
A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.
A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.
A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.
A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. The vulnerability is due to insufficient input validation of URLs. An attacker could exploit this vulnerability by crafting a URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for the affected device, which could allow malicious URLs to pass through the device.
A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to cause a targeted AnyConnect user to execute a malicious script. The vulnerability is due to a lack of authentication to the IPC listener. An attacker could exploit this vulnerability by sending crafted IPC messages to the AnyConnect client IPC listener. A successful exploit could allow an attacker to cause the targeted AnyConnect user to execute a script. This script would execute with the privileges of the targeted AnyConnect user. In order to successfully exploit this vulnerability, there must be an ongoing AnyConnect session by the targeted user at the time of the attack. To exploit this vulnerability, the attacker would also need valid user credentials on the system upon which the AnyConnect client is being run. Cisco has not released software updates that address this vulnerability.
A vulnerability in the ingress packet processing path of Cisco Firepower Threat Defense (FTD) Software for interfaces that are configured either as Inline Pair or in Passive mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation when Ethernet frames are processed. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker do either of the following: Fill the /ngfw partition on the device: A full /ngfw partition could result in administrators being unable to log in to the device (including logging in through the console port) or the device being unable to boot up correctly. Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition. Cause a process crash: The process crash would cause the device to reload. No manual intervention is necessary to recover the device after the reload.
A vulnerability in Cisco Jabber software could allow an authenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper validation of message contents. An attacker could exploit this vulnerability by sending specially crafted messages to a targeted system. A successful exploit could allow the attacker to cause the application to return sensitive authentication information to another system, possibly for use in further attacks.
A vulnerability in Cisco Webex Network Recording Player and Cisco Webex Player for Microsoft Windows could allow an attacker to cause a process crash resulting in a Denial of service (DoS) condition for the player application on an affected system. The vulnerability exists due to insufficient validation of certain elements with a Webex recording stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to cause the Webex player application to crash when trying to view the malicious file.
A vulnerability in a specific REST API of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker with a low-privileged account could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to read arbitrary files on the affected system.
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code with root privileges on the underlying Linux shell. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by first creating a malicious file on the affected device itself and then uploading a second malicious file to the device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or bypass licensing requirements on the device.
A vulnerability in Cisco Firepower Device Manager (FDM) On-Box software could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by uploading a malicious file to an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on as well as modify the underlying operating system of an affected device.
A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability.
A vulnerability in the PDF archive parsing module in Clam AntiVirus (ClamAV) Software versions 0.101 - 0.102.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a stack buffer overflow read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.
A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.
A vulnerability in the Polaris kernel of Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to crash the device. The vulnerability is due to insufficient packet size validation. An attacker could exploit this vulnerability by sending jumbo frames or frames larger than the configured MTU size to the management interface of this device. A successful exploit could allow the attacker to crash the device fully before an automatic recovery.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.
A vulnerability in the Cisco Discovery Protocol implementation for the Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP Camera. The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to the targeted IP Camera. A successful exploit could allow the attacker to expose the affected IP Camera for remote code execution or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). This vulnerability is fixed in Video Surveillance 8000 Series IP Camera Firmware Release 1.0.7 and later.
A vulnerability in the Session Initiation Protocol (SIP) library of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient sanity checks on received SIP messages. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service condition.
A vulnerability in the CLI parser of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to access files from the flash: filesystem. The vulnerability is due to insufficient application of restrictions during the execution of a specific command. An attacker could exploit this vulnerability by using a specific command at the command line. A successful exploit could allow the attacker to obtain read-only access to files that are located on the flash: filesystem that otherwise might not have been accessible.
Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol handler of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.
A vulnerability in DNS over IPv6 packet processing for Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper length validation of a field in an IPv6 DNS packet. An attacker could exploit this vulnerability by sending a crafted DNS query over IPv6, which traverses the affected device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to DNS over IPv6 traffic only.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files.
A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the Cisco NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
vulnerability within the Multimedia Viewer feature of Cisco Webex Meetings could allow an authenticated, remote attacker to bypass security protections. The vulnerability is due to missing security warning dialog boxes when a room host views shared multimedia files. An authenticated, remote attacker could exploit this vulnerability by using the host role to share files within the Multimedia sharing feature and convincing a former room host to view that file. A warning dialog normally appears cautioning users before the file is displayed; however, the former host would not see that warning dialog, and any shared multimedia would be rendered within the user's browser. The attacker could leverage this behavior to conduct additional attacks by including malicious files within a targeted room host's browser window.
Multiple vulnerabilities in the API subsystem of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges. The vulnerabilities are due to improper boundary checks for certain user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the API subsystem of an affected system. When this request is processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying operating system (OS).
A vulnerability in the archive utility of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to a lack of proper input validation of paths that are embedded within archive files. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to write arbitrary files in the system with the privileges of the logged-in user.
A vulnerability in URL filtering of Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to bypass URL filtering on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted, malicious HTTP request to an affected device. A successful exploit could allow the attacker to redirect users to malicious sites.
A vulnerability in Cisco Webex Meetings Desktop App could allow an unauthenticated, remote attacker to execute programs on an affected end-user system. The vulnerability is due to improper validation of input that is supplied to application URLs. The attacker could exploit this vulnerability by persuading a user to follow a malicious URL. A successful exploit could allow the attacker to cause the application to execute other programs that are already present on the end-user system. If malicious files are planted on the system or on an accessible network file path, the attacker could execute arbitrary code on the affected system.
A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific HTTP request headers. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to trigger a prolonged status of high CPU utilization relative to the GUI process(es). Upon successful exploitation of this vulnerability, an affected device will still be operative, but its response time and overall performance may be degraded.
A vulnerability in the Common Open Policy Service (COPS) engine of Cisco IOS XE Software on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to crash a device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a malformed COPS message to the device. A successful exploit could allow the attacker to crash the device.
A vulnerability in the web-based management interface of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to insufficient validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the interface of an affected device. A successful exploit could allow the attacker to obtain the IP addresses that are configured on the internal interfaces of the affected device. There is a workaround that addresses this vulnerability.
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the file scan process of Cisco AMP for Endpoints Mac Connector Software could cause the scan engine to crash during the scan of local files, resulting in a restart of the AMP Connector and a denial of service (DoS) condition of the Cisco AMP for Endpoints service. The vulnerability is due to insufficient input validation of specific file attributes. An attacker could exploit this vulnerability by providing a crafted file to a user of an affected system. A successful exploit could allow the attacker to cause the Cisco AMP for Endpoints service to crash, resulting in missed detection and logging of the potentially malicious file. Continued attempts to scan the file could result in a DoS condition of the Cisco AMP for Endpoints service.