A vulnerability exists in the SaveConfigFile function of the RACompare Service, which may allow for OS command injection. This vulnerability may allow a remote, unauthenticated attacker to execute arbitrary commands in Rockwell Automation FactoryTalk AssetCentre v10.00 and earlier.

A vulnerability was found in Alien Technology ALR-F800 up to 19.10.24.00. It has been rated as critical. Affected by this issue is some unknown functionality of the file /admin/system.html. The manipulation of the argument uploadedFile with the input ;whoami leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.

A vulnerability was detected in Wavlink WL-WN578W2 221110. This impacts the function sub_404DBC of the file /cgi-bin/wireless.cgi. The manipulation of the argument macAddr results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

LUCY Security Awareness Software through 4.7.x allows unauthenticated remote code execution because the Migration Tool (in the Support section) allows upload of .php files within a system.tar.gz file. The .php file becomes accessible with a public/system/static URI.

Accellion FTA 9_12_370 and earlier is affected by OS command execution via a crafted POST request to various admin endpoints. The fixed version is FTA_9_12_380 and later.

HyperX NGENUITY software is potentially vulnerable to arbitrary code execution. HP is releasing updated software to address the potential vulnerability.

Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

rakibtg Docker Dashboard before 2021-02-28 allows command injection in backend/utilities/terminal.js via shell metacharacters in the command parameter of an API request. NOTE: this is NOT a Docker, Inc. product.

Improper Authentication vulnerability in Genians Genian NAC V4.0, Genians Genian NAC V5.0, Genians Genian NAC Suite V5.0, Genians Genian ZTNA allows Authentication Abuse.This issue affects Genian NAC V4.0: from V4.0.0 through V4.0.155; Genian NAC V5.0: from V5.0.0 through V5.0.42 (Revision 117460); Genian NAC Suite V5.0: from V5.0.0 through V5.0.54; Genian ZTNA: from V6.0.0 through V6.0.15.

OS command injection vulnerability in ELECOM wireless LAN routers allows an attacker who can access the product to execute an arbitrary OS command by sending a specially crafted request. Affected products and versions are as follows: WRC-F1167ACF all versions, WRC-1750GHBK all versions, WRC-1167GHBK2 all versions, WRC-1750GHBK2-I all versions, and WRC-1750GHBK-E all versions.

The ftpd gem 0.2.1 for Ruby allows remote attackers to execute arbitrary OS commands via shell metacharacters in a LIST or NLST command argument within FTP protocol traffic.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.

OS Command Injection in GitHub repository jgraph/drawio prior to 21.4.0.

A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg. The manipulation leads to os command injection. The attack can be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

EPrints 3.4.2 allows remote attackers to execute OS commands via crafted LaTeX input to a cgi/cal?year= URI.

OS Command Injection in GitHub repository jgraph/drawio prior to 21.5.0.

The gitlog function in src/index.ts in gitlog before 4.0.4 has a command injection vulnerability.

SPIP before 4.3.2, 4.2.16, and 4.1.18 is vulnerable to a command injection issue. A remote and unauthenticated attacker can execute arbitrary operating system commands by sending a crafted multipart file upload HTTP request.

An issue was discovered in OpenNDS before 10.1.3. It fails to sanitize the status path script entry in the configuration file, allowing attackers that have direct or indirect access to this file to execute arbitrary OS commands.

PaddlePaddle before 2.5.0 has a command injection in fs.py. This resulted in the ability to execute arbitrary commands on the operating system.

The Linear eMerge e3-Series through version 1.00-07 is vulnerable to an OS command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary OS commands via the login_id parameter when invoking the forgot_password functionality over HTTP.

An OS command injection was found in SecuwaySSL, when special characters injection on execute command with runCommand arguments.

Moxa’s cellular routers, secure routers, and network security appliances are affected by a critical vulnerability, CVE-2024-9140. This vulnerability allows OS command injection due to improperly restricted commands, potentially enabling attackers to execute arbitrary code. This poses a significant risk to the system’s security and functionality.

The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an unauthenticated OS command injection vulnerability in command.php, which improperly handles the cmd POST parameter. A remote attacker can exploit this flaw without authentication to spawn a Telnet service on a specified port, enabling persistent interactive shell access as root.

CloudExplorer Lite is an open source, lightweight cloud management platform. Versions prior to 1.3.1 contain a command injection vulnerability in the installation function in module management. The vulnerability has been fixed in v1.3.1. There are no known workarounds aside from upgrading.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

An issue was discovered in OpenNDS before 10.1.3. It fails to sanitize the gateway FQDN entry in the configuration file, allowing attackers that have direct or indirect access to this file to execute arbitrary OS commands.

An issue was discovered on Fastweb Askey RTV1907VW 0.00.81_FW_200_Askey 2018-10-02 18:08:18 devices. By using the usb_remove service through an HTTP request, it is possible to inject and execute a command between two & characters in the mount parameter.

The web interface on the RIGOL MSO5000 digital oscilloscope with firmware 00.01.03.00.03 allows remote attackers to execute arbitrary code via shell metacharacters in pass1 to the webcontrol changepwd.cgi application.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/dgUpload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

All versions of package git are vulnerable to Remote Code Execution (RCE) due to missing sanitization in the Git.git method, which allows execution of OS commands rather than just git commands. Steps to Reproduce 1. Create a file named exploit.js with the following content: js var Git = require("git").Git; var repo = new Git("repo-test"); var user_input = "version; date"; repo.git(user_input, function(err, result) { console.log(result); }) 2. In the same directory as exploit.js, run npm install git. 3. Run exploit.js: node exploit.js. You should see the outputs of both the git version and date command-lines. Note that the repo-test Git repository does not need to be present to make this PoC work.

devcert-sanscache before 0.4.7 allows remote attackers to execute arbitrary code or cause a Command Injection via the exec function. The variable `commonName` controlled by user input is used as part of the `exec` function without any sanitization.

push-dir through 0.4.1 allows execution of arbritary commands. Arguments provided as part of the variable "opt.branch" is not validated before being provided to the "git" command within "index.js#L139". This could be abused by an attacker to inject arbitrary commands.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

serial-number through 1.3.0 allows execution of arbritary commands. The "cmdPrefix" argument in serialNumber function is used by the "exec" function without any validation.

im-metadata through 3.0.1 allows remote attackers to execute arbitrary commands via the "exec" argument. It is possible to inject arbitrary commands as part of the metadata options which is given to the "exec" function.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the password can be specified, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

vm2 is an open source vm/sandbox for Node.js. In vm2 for versions up to and including 3.9.19, Node.js custom inspect function allows attackers to escape the sandbox and run arbitrary code. This may result in Remote Code Execution, assuming the attacker has arbitrary code execution primitive inside the context of vm2 sandbox. There are no patches and no known workarounds. Users are advised to find an alternative software.

Synel SYnergy Fingerprint Terminals - CWE-78: 'OS Command Injection'

All versions including 0.0.4 of lsof npm module are vulnerable to Command Injection. Every exported method used by the package uses the exec function to parse user input.

BibTeX-ruby before 5.1.0 allows shell command injection due to unsanitized user input being passed directly to the built-in Ruby Kernel.open method through BibTeX.open.

Blamer versions prior to 1.0.1 allows execution of arbitrary commands. It is possible to inject arbitrary commands as part of the arguments provided to blamer.

Grandstream GAC2500 1.0.3.35, GXP2200 1.0.3.27, GVC3202 1.0.3.51, GXV3275 before 1.0.3.219 Beta, and GXV3240 before 1.0.3.219 Beta devices allow unauthenticated remote code execution via shell metacharacters in a /manager?action=getlogcat priority field, in conjunction with a buffer overflow (via the phonecookie cookie) to overwrite a data structure and consequently bypass authentication. This can be exploited remotely or via CSRF because the cookie can be placed in an Accept HTTP header in an XMLHttpRequest call to lighttpd.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in HGiga iSherlock 4.5 (iSherlock-user modules), HGiga iSherlock 5.5 (iSherlock-user modules) allows OS Command Injection.This issue affects iSherlock 4.5: before iSherlock-user-4.5-174; iSherlock 5.5: before iSherlock-user-5.5-174.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_R5_SpareDsk_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.