Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

processCommandSetUid() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.

processCommandUpgrade() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue in tiagorlampert CHAOS before 1b451cf62582295b7225caf5a7b506f0bad56f6b and 24c9e109b5be34df7b2bce8368eae669c481ed5e allows a remote attacker to execute arbitrary code via the unsafe concatenation of the `filename` argument into the `buildStr` string without any sanitization or filtering.

An OS command injection vulnerability in the discover_and_manage CGI script in NETSAS Enigma NMS 65.0.0 and prior allows an attacker to execute arbitrary code because of improper neutralization of shell metacharacters in the ip_address variable within an snmp_browser action.

Yachtcontrol through 2019-10-06: It's possible to perform direct Operating System commands as an unauthenticated user via the "/pages/systemcall.php?command={COMMAND}" page and parameter, where {COMMAND} will be executed and returning the results to the client. Affects Yachtcontrol webservers disclosed via Dutch GPRS/4G mobile IP-ranges. IP addresses vary due to DHCP client leasing of telco's.

An issue was discovered in Webmin <=1.920. The parameter old in password_change.cgi contains a command injection vulnerability.

The api/ZRIptv/setIptvInfo interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iptv_vlan parameter.

The kill-port-process package version < 2.2.0 is vulnerable to a Command Injection vulnerability.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Due to lack of input validation in the cmd_sys_traceroute_exec(), cmd_sys_arp_clear(), and cmd_sys_ping_exec() functions in the libclicmd.so library contained in the firmware, an attacker could leverage these functions to call system() and execute arbitrary commands on the switches. (Note that these functions are currently not called in this version of the firmware, however an attacker could use other vulnerabilities to finally use these vulnerabilities to gain code execution.)

A remote code execution vulnerability in the PAN-OS SSH device management interface that can lead to unauthenticated remote users with network access to the SSH management interface gaining root access to PAN-OS. This issue affects PAN-OS 7.1 versions prior to 7.1.24-h1, 7.1.25; 8.0 versions prior to 8.0.19-h1, 8.0.20; 8.1 versions prior to 8.1.9-h4, 8.1.10; 9.0 versions prior to 9.0.3-h3, 9.0.4.

An issue was discovered on various devices via the Linkplay firmware. There is WAN remote code execution without user interaction. An attacker could retrieve the AWS key from the firmware and obtain full control over Linkplay's AWS estate, including S3 buckets containing device firmware. When combined with an OS command injection vulnerability within the XML Parsing logic of the firmware update process, an attacker would be able to gain code execution on any device that attempted to update. Note that by default all devices tested had automatic updates enabled.

The commit diff rest endpoint in Bitbucket Server and Data Center before 5.16.10 (the fixed version for 5.16.x ), from 6.0.0 before 6.0.10 (the fixed version for 6.0.x), from 6.1.0 before 6.1.8 (the fixed version for 6.1.x), from 6.2.0 before 6.2.6 (the fixed version for 6.2.x), from 6.3.0 before 6.3.5 (the fixed version for 6.3.x), from 6.4.0 before 6.4.3 (the fixed version for 6.4.x), and from 6.5.0 before 6.5.2 (the fixed version for 6.5.x) allows remote attackers who have permission to access a repository, if public access is enabled for a project or repository then attackers are able to exploit this issue anonymously, to read the contents of arbitrary files on the system and execute commands via injecting additional arguments into git commands.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. An unauthenticated remote OS Command Injection vulnerability allows an attacker to execute arbitrary commands on the RTU due to the passing of unsafe user supplied data to the RTU's system shell. Functionality in mobile.php provides users with the ability to ping sites or IP addresses via Mobile Connection Test. When the Mobile Connection Test is submitted, action.php is called to execute the test. An attacker can use a shell command separator (;) in the host variable to execute operating system commands upon submitting the test data.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

OS Command injection vulnerability in Support Center Plus 11 via Executor in Action when creating new schedules.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

_s_/sprm/_s_/dyn/Player_setScriptFile in Sahi Pro 8.0.0 allows command execution. It allows one to run ".sah" scripts via Sahi Launcher. Also, one can create a new script with an editor. It is possible to execute commands on the server using the _execute() function.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow internalPort OS Command Injection (issue 2 of 5).

Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow portMappingProtocol OS Command Injection (issue 3 of 5).

Apcupsd 0.3.91_5, as used in pfSense through 2.4.4-RELEASE-p3 and other products, has an Arbitrary Command Execution issue in apcupsd_status.php.

An issue was discovered in OpenNDS before 10.1.3. It fails to sanitize the status path script entry in the configuration file, allowing attackers that have direct or indirect access to this file to execute arbitrary OS commands.

A vulnerability, which was classified as critical, has been found in MailCleaner up to 2023.03.14. This issue affects some unknown processing of the component Email Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-262307.

Compal CH7465LG CH7465LG-NCIP-6.12.18.24-5p8-NOSH devices have Incorrect Access Control because of Improper Input Validation. The attacker can send a maliciously modified POST (HTTP) request containing shell commands, which will be executed on the device, to an backend API endpoint of the cable modem.

In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

Command injection is possible in ThinStation through 6.1.1 via shell metacharacters after the cgi-bin/CdControl.cgi action= substring, or after the cgi-bin/VolControl.cgi OK= substring.

An issue was discovered on Fastweb Askey RTV1907VW 0.00.81_FW_200_Askey 2018-10-02 18:08:18 devices. By using the usb_remove service through an HTTP request, it is possible to inject and execute a command between two & characters in the mount parameter.

A remote code execution vulnerability exists in mintplex-labs/anything-llm due to improper handling of environment variables. Attackers can exploit this vulnerability by injecting arbitrary environment variables via the `POST /api/system/update-env` endpoint, which allows for the execution of arbitrary code on the host running anything-llm. The vulnerability is present in the latest version of anything-llm, with the latest commit identified as fde905aac1812b84066ff72e5f2f90b56d4c3a59. This issue has been fixed in version 1.0.0. Successful exploitation could lead to code execution on the host, enabling attackers to read and modify data accessible to the user running the service, potentially leading to a denial of service.

An issue was discovered on D-Link DAP-1650 devices before 1.04B02_J65H Hot Fix. Attackers can execute arbitrary commands.

There is a command injection vulnerability in the underlying Central Communications service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

OS command injection vulnerability in drivers_syno_import_user.php in Synology Calendar before 2.3.1-0617 allows remote attackers to execute arbitrary commands via the crafted 'X-Real-IP' header.

There is a command injection vulnerability in the underlying deauthentication service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

In OpenWrt LuCI through 0.10, the endpoints admin/status/realtime/bandwidth_status and admin/status/realtime/wireless_status of the web application are affected by a command injection vulnerability.

An issue was discovered on TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices. OS command injection occurs through the get_set.ccp lanHostCfg_HostName_1.1.1.0.0 parameter.

gpg-key2ps in signing-party 1.1.x and 2.x before 2.10-1 contains an unsafe shell call enabling shell injection via a User ID.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: Multimedia Console 2.1.2 ( 2023/05/04 ) and later Multimedia Console 1.4.8 ( 2023/05/05 ) and later QTS 5.1.0.2399 build 20230515 and later QTS 4.3.6.2441 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later Media Streaming add-on 500.1.1.2 ( 2023/06/12 ) and later Media Streaming add-on 500.0.0.11 ( 2023/06/16 ) and later

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

There are command injection vulnerabilities in the underlying Soft AP Daemon service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

network-manager through 1.0.2 allows remote attackers to execute arbitrary commands via the "execSync()" argument.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote unauthenticated attacker to execute an arbitrary OS command.

Blamer versions prior to 1.0.1 allows execution of arbitrary commands. It is possible to inject arbitrary commands as part of the arguments provided to blamer.

Zumtobel Netlink CCD Onboard 3.74 - Firmware 3.80 was discovered to contain a command injection vulnerability via the NetHostname parameter.

Thecus 4800Eco was discovered to contain a command injection vulnerability via the username parameter in /adm/setmain.php.