miaofng/uds-c commit e506334e270d77b20c0bc259ac6c7d8c9b702b7a (2016-10-05) contains a stack buffer overflow in send_diagnostic_request. A 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) receives memcpy at offset 1+pid_length with payload_length bytes. MAX_UDS_REQUEST_PAYLOAD_LENGTH=7, so 1+2+7=10 exceeds buffer by 4 bytes. No bounds check on payload_length before memcpy.

TOTOLINK NR1800X v9.1.0u.6681_B20230703 was discovered to contain a stack overflow via the password parameter in the function urldecode

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges. First identified on Nissan Leaf ZE1 manufactured in 2020.

Tenda FH1206 V1.2.0.8(8155)_EN contains a Buffer Overflow vulnerability via the function formWrlsafeset.

TOTOLINK A3002RU_V3 V3.0.0-B20220304.1804 was discovered to contain a stack-based buffer overflow via the static_ipv6 parameter in the formIpv6Setup function.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function formGetIptv.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function setIptvInfo.

When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv4 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv4 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode.

When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv6 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv6 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode.

Stack-based buffer overflow vulnerability exists in ELECOM wireless access points. By processing a specially crafted HTTP request, arbitrary code may be executed.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.mode parameter in the function formGetIptv.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9703.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the SOAPACTION parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input, and possibly remote code execution.

Stack overflow vulnerability in the Login function in the HNAP service in D-Link DCS-960L with firmware 1.09 allows attackers to execute of arbitrary code.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

There is a Stack overflow Vulnerability in the device Search and Discovery feature of Hikvision NVR/DVR/CVR/IPC models. If exploited, an attacker on the same local area network (LAN) could cause the device to malfunction by sending specially crafted packets to an unpatched device.

There is a Stack overflow Vulnerability in the device Search and Discovery feature of Hikvision Access Control Products. If exploited, an attacker on the same local area network (LAN) could cause the device to malfunction by sending specially crafted packets to an unpatched device.

A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

D-Link DAP-1325 get_value_from_app Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18823.

D-Link DAP-1325 SetAPLanSettings Gateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18826.

D-Link DAP-1325 SetAPLanSettings IPAddr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18827.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the schedEndTime parameter in the setSchedWifi function.

D-Link DIR-816 A2 v1.10CNB05 was discovered to contain a stack overflow via parameter flag_5G in showMACfilterMAC.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the timeZone parameter in the fromSetSysTime function.

The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges. First identified on Nissan Leaf ZE1 manufactured in 2020.

The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges. First identified on Nissan Leaf ZE1 manufactured in 2020.

Linksys WRT54G v4.21.5 has a stack overflow vulnerability in get_merge_mac function.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the domain parameter in the add_white_node function.

D-Link DAP-1325 SetAPLanSettings DeviceName Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18825.

D-Link DIR-816 A2 v1.10CNB05 was discovered to contain a stack overflow via parameter statuscheckpppoeuser in dir_setWanWifi.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via eport in the function setIpPortFilterRules.

Potential buffer overflow vulnerability in the Zephyr IEEE 802.15.4 nRF 15.4 driver

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the File parameter in function UploadCustomModule.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid5g in the function setWiFiEasyGuestCfg.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiGuestCfg

Tenda FH1206 V1.2.0.8(8155)_EN was discovered to contain a stack-based buffer overflow vulnerability via the list1 parameter at ip/goform/DhcpListClient.

TOTOLINK CP900L v4.1.5cu.798_B20221228 was discovered to contain a stack overflow via the password parameter in the function loginAuth

TOTOLINK CP450 v4.1.0cu.747_B20191224 was discovered to contain a stack buffer overflow vulnerability in the setStaticDhcpConfig function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the password parameter in the function urldecode.

TOTOLINK AC1200 Wireless Router A3002R Firmware V1.1.1-B20200824 is vulnerable to Buffer Overflow. In the boa server program's CGI handling function formWlEncrypt, there is a lack of length restriction on the wlan_ssid field. This oversight leads to potential buffer overflow under specific circumstances. For instance, by invoking the formWlanRedirect function with specific parameters to alter wlan_idx's value and subsequently invoking the formWlEncrypt function, an attacker can trigger buffer overflow, enabling arbitrary command execution or denial of service attacks.

Tenda AC18 V15.03.3.10_EN was discovered to contain a stack-based buffer overflow vulnerability via the deviceMac parameter at ip/goform/addWifiMacFilter.

Tenda FH1206 V1.2.0.8(8155)_EN was discovered to contain a stack-based buffer overflow vulnerability via the funcpara1 parameter in ip/goform/setcfm.

Tenda FH1205 v2.0.0.7(775) has a stack overflow vulnerability in the urls parameter from saveParentControlInfo function.

Tenda FH1202 v1.2.0.14(408) has a stack overflow vulnerability in the time parameter of the saveParentControlInfo function.

Secure Boot Security Feature Bypass Vulnerability

D-Link DAP-1325 SetAPLanSettings PrimaryDNS Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18829.