In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems.

In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.

In the Linux kernel, the following vulnerability has been resolved: ima: Avoid blocking in RCU read-side critical section A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case]

In the Linux kernel, the following vulnerability has been resolved: nvmet: always initialize cqe.result The spec doesn't mandate that the first two double words (aka results) for the command queue entry need to be set to 0 when they are not used (not specified). Though, the target implemention returns 0 for TCP and FC but not for RDMA. Let's make RDMA behave the same and thus explicitly initializing the result field. This prevents leaking any data from the stack.

In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable().

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: Fix sb_field_downgrade validation - bch2_sb_downgrade_validate() wasn't checking for a downgrade entry extending past the end of the superblock section - for_each_downgrade_entry() is used in to_text() and needs to work on malformed input; it also was missing a check for a field extending past the end of the section

In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr() Requests the vchan lock before using xdma->stop_request.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops.

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_una is properly initialized on connect This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates.

In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise.

In the Linux kernel, the following vulnerability has been resolved: block: fix request.queuelist usage in flush Friedrich Weber reported a kernel crash problem and bisected to commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine"). The root cause is that we use "list_move_tail(&rq->queuelist, pending)" in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch(). We don't initialize its queuelist just for this first request, although the queuelist of all later popped requests will be initialized. Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so rq->queuelist doesn't need to be initialized. It should be ok since rq can't be on any list when PREFLUSH or POSTFLUSH, has no move actually. Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine") also has another requirement that no drivers would touch rq->queuelist after blk_mq_end_request() since we will reuse it to add rq to the post-flush pending list in POSTFLUSH. If this is not true, we will have to revert that commit IMHO. This updated version adds "list_del_init(&rq->queuelist)" in flush rq callback since the dm layer may submit request of a weird invalid format (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add if without this "list_del_init(&rq->queuelist)". The weird invalid format problem should be fixed in dm layer.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate ff offset This adds sanity checks for ff offset. There is a check on rt->first_free at first, but walking through by ff without any check. If the second ff is a large offset. We may encounter an out-of-bound read.

In the Linux kernel, the following vulnerability has been resolved: tipc: force a dst refcount before doing decryption As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before entering the xfrm type handlers"): "Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers." On TIPC decryption path it has the same problem, and skb_dst_force() should be called before doing decryption to avoid a possible crash. Shuang reported this issue when this warning is triggered: [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug [] Workqueue: crypto cryptd_queue_worker [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Call Trace: [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc] [] tipc_rcv+0xcf5/0x1060 [tipc] [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc] [] cryptd_aead_crypt+0xdb/0x190 [] cryptd_queue_worker+0xed/0x190 [] process_one_work+0x93d/0x17e0

In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_check_dir_entry() This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region.

In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix memory leak on usb_submit_urb() failure In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: change vm->task_info handling This patch changes the handling and lifecycle of vm->task_info object. The major changes are: - vm->task_info is a dynamically allocated ptr now, and its uasge is reference counted. - introducing two new helper funcs for task_info lifecycle management - amdgpu_vm_get_task_info: reference counts up task_info before returning this info - amdgpu_vm_put_task_info: reference counts down task_info - last put to task_info() frees task_info from the vm. This patch also does logistical changes required for existing usage of vm->task_info. V2: Do not block all the prints when task_info not found (Felix) V3: Fixed review comments from Felix - Fix wrong indentation - No debug message for -ENOMEM - Add NULL check for task_info - Do not duplicate the debug messages (ti vs no ti) - Get first reference of task_info in vm_init(), put last in vm_fini() V4: Fixed review comments from Felix - fix double reference increment in create_task_info - change amdgpu_vm_get_task_info_pasid - additional changes in amdgpu_gem.c while porting

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix memregion leaks in devm_cxl_add_region() Move the mode verification to __create_region() before allocating the memregion to avoid the memregion leaks.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove(): [ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12 [ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry [ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004 [...] [ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [...] [ 57.331328] Call Trace: [ 57.331477] <TASK> [...] [ 57.333511] ? do_user_addr_fault+0x3e5/0x740 [ 57.333778] ? exc_page_fault+0x70/0x170 [ 57.334016] ? asm_exc_page_fault+0x2b/0x30 [ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10 [ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0 [ 57.335164] ocfs2_xa_set+0x704/0xcf0 [ 57.335381] ? _raw_spin_unlock+0x1a/0x40 [ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20 [ 57.335915] ? trace_preempt_on+0x1e/0x70 [ 57.336153] ? start_this_handle+0x16c/0x500 [ 57.336410] ? preempt_count_sub+0x50/0x80 [ 57.336656] ? _raw_read_unlock+0x20/0x40 [ 57.336906] ? start_this_handle+0x16c/0x500 [ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0 [ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0 [ 57.337706] ? ocfs2_start_trans+0x13d/0x290 [ 57.337971] ocfs2_xattr_set+0xb13/0xfb0 [ 57.338207] ? dput+0x46/0x1c0 [ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338948] __vfs_removexattr+0x92/0xc0 [ 57.339182] __vfs_removexattr_locked+0xd5/0x190 [ 57.339456] ? preempt_count_sub+0x50/0x80 [ 57.339705] vfs_removexattr+0x5f/0x100 [...] Reproducer uses faultinject facility to fail ocfs2_xa_remove() -> ocfs2_xa_value_truncate() with -ENOMEM. In this case the comment mentions that we can return 0 if ocfs2_xa_cleanup_value_truncate() is going to wipe the entry anyway. But the following 'rc' check is wrong and execution flow do 'ocfs2_xa_remove_entry(loc);' twice: * 1st: in ocfs2_xa_cleanup_value_truncate(); * 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'. Fix this by skipping the 2nd removal of the same entry and making syzkaller repro happy.

A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service.

A flaw was found in the IPv6 module of the Linux kernel. The arg.result was not used consistently in fib6_rule_lookup, sometimes holding rt6_info and other times fib6_info. This was not accounted for in other parts of the code where rt6_info was expected unconditionally, potentially leading to a kernel panic in fib6_rule_suppress.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-sm6350: Add missing parent_map for two clocks If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix integer overflow bug on 32 bit systems Most of these sizes and counts are capped at 256MB so the math doesn't result in an integer overflow. The "relocs" count needs to be checked as well. Otherwise on 32bit systems the calculation of "full_data" could be wrong. full_data = data_len + relocs * sizeof(unsigned long);

In the Linux kernel, the following vulnerability has been resolved: ptr_ring: do not block hard interrupts in ptr_ring_resize_multiple() Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page() to increase test coverage. syzbot found a splat caused by hard irq blocking in ptr_ring_resize_multiple() [1] As current users of ptr_ring_resize_multiple() do not require hard irqs being masked, replace it to only block BH. Rename helpers to better reflect they are safe against BH only. - ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh() - skb_array_resize_multiple() to skb_array_resize_multiple_bh() [1] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Modules linked in: CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline] RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85 RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083 RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000 RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843 RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040 R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tun_ptr_free drivers/net/tun.c:617 [inline] __ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline] ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline] tun_queue_resize drivers/net/tun.c:3694 [inline] tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024 do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923 rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201 rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1] If dvb->mux is not initialized successfully by vidtv_mux_init() in the vidtv_start_streaming(), it will trigger null pointer dereference about mux in vidtv_mux_stop_thread(). Adjust the timing of streaming initialization and check it before stopping it. [1] KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471 Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8 RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125 RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128 RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188 R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710 FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline] vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252 dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000 dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486 dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3f8/0xb60 fs/file_table.c:450 task_work_run+0x14e/0x250 kernel/task_work.c:239 get_signal+0x1d3/0x2610 kernel/signal.c:2790 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT is enabled. [ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs [ 35.118569] preempt_count: 1, expected: 0 [ 35.118571] RCU nest depth: 1, expected: 1 [ 35.118577] INFO: lockdep is turned off. ... [ 35.118647] __might_resched+0x433/0x5b0 [ 35.118677] rt_spin_lock+0xc3/0x290 [ 35.118700] ___slab_alloc+0x72/0xc40 [ 35.118723] __kmalloc_noprof+0x13f/0x4e0 [ 35.118732] bpf_map_kzalloc+0xe5/0x220 [ 35.118740] bpf_selem_alloc+0x1d2/0x7b0 [ 35.118755] bpf_local_storage_update+0x2fa/0x8b0 [ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0 [ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66 [ 35.118795] bpf_trace_run3+0x222/0x400 [ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20 [ 35.118824] trace_inet_sock_set_state+0x112/0x130 [ 35.118830] inet_sk_state_store+0x41/0x90 [ 35.118836] tcp_set_state+0x3b3/0x640 There is no need to adjust the gfp_flags passing to the bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL. The verifier has ensured GFP_KERNEL is passed only in sleepable context. It has been an old issue since the first introduction of the bpf_local_storage ~5 years ago, so this patch targets the bpf-next. bpf_mem_alloc is needed to solve it, so the Fixes tag is set to the commit when bpf_mem_alloc was first used in the bpf_local_storage.

In the Linux kernel, the following vulnerability has been resolved: rdma/cxgb4: Prevent potential integer overflow on 32bit The "gl->tot_len" variable is controlled by the user. It comes from process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an integer wrapping bug. Use size_add() to prevent this.

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.

In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before txBeginAnon() call Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: check for NULL in btrtl_setup_realtek() If insert an USB dongle which chip is not maintained in ic_id_table, it will hit the NULL point accessed. Add a null point check to avoid the Kernel Oops.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix crash when adding interface under a lag Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag") fixed a similar issue in the lan966x driver caused by a NULL pointer dereference. The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic and is susceptible to the same crash. This issue specifically affects the ocelot_vsc7514.c frontend, which leaves unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as it uses the DSA framework which registers all ports. Fix this by checking if the port pointer is valid before accessing it.

In the Linux kernel, the following vulnerability has been resolved: bpf: check changes_pkt_data property for extension programs When processing calls to global sub-programs, verifier decides whether to invalidate all packet pointers in current state depending on the changes_pkt_data property of the global sub-program. Because of this, an extension program replacing a global sub-program must be compatible with changes_pkt_data property of the sub-program being replaced. This commit: - adds changes_pkt_data flag to struct bpf_prog_aux: - this flag is set in check_cfg() for main sub-program; - in jit_subprogs() for other sub-programs; - modifies bpf_check_attach_btf_id() to check changes_pkt_data flag; - moves call to check_attach_btf_id() after the call to check_cfg(), because it needs changes_pkt_data flag to be set: bpf_check: ... ... - check_attach_btf_id resolve_pseudo_ldimm64 resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded bpf_prog_is_offloaded check_cfg check_cfg + check_attach_btf_id ... ... The following fields are set by check_attach_btf_id(): - env->ops - prog->aux->attach_btf_trace - prog->aux->attach_func_name - prog->aux->attach_func_proto - prog->aux->dst_trampoline - prog->aux->mod - prog->aux->saved_dst_attach_type - prog->aux->saved_dst_prog_type - prog->expected_attach_type Neither of these fields are used by resolve_pseudo_ldimm64() or bpf_prog_offload_verifier_prep() (for netronome and netdevsim drivers), so the reordering is safe.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() I got a syzbot report without a repro [1] crashing in nf_send_reset6() I think the issue is that dev->hard_header_len is zero, and we attempt later to push an Ethernet header. Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c. [1] skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900045269b0 EFLAGS: 00010282 RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800 RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000 RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140 R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 eth_header+0x38/0x1f0 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3208 [inline] nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358 nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_bridge_pre net/bridge/br_input.c:277 [inline] br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424 __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562 __netif_receive_skb_one_core net/core/dev.c:5666 [inline] __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781 netif_receive_skb_internal net/core/dev.c:5867 [inline] netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926 tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550 tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053 new_sync_write fs/read_write.c:590 [inline] vfs_write+0xa6d/0xc90 fs/read_write.c:683 ksys_write+0x183/0x2b0 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdbeeb7d1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48 RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8 RBP: 00007fdbeebf12be R08: 0000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth from the OPP table but the bandwidth table was not created because the interconnect properties were missing in the OPP consumer node, the kernel will crash with: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 ... pc : _read_bw+0x8/0x10 lr : _opp_table_find_key+0x9c/0x174 ... Call trace: _read_bw+0x8/0x10 (P) _opp_table_find_key+0x9c/0x174 (L) _find_key+0x98/0x168 dev_pm_opp_find_bw_ceil+0x50/0x88 ... In order to fix the crash, create an assert function to check if the bandwidth table was created before trying to get a bandwidth with _read_bw().

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: smc: Handle missing SCM device Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer dereference") makes it explicit that qcom_scm_get_tzmem_pool() can return NULL, therefore its users should handle this.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Fix ida_free call while not allocated In the rproc_alloc() function, on error, put_device(&rproc->dev) is called, leading to the call of the rproc_type_release() function. An error can occurs before ida_alloc is called. In such case in rproc_type_release(), the condition (rproc->index >= 0) is true as rproc->index has been initialized to 0. ida_free() is called reporting a warning: [ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164 [ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0 [ 4.188854] ida_free called for id=0 which is not allocated. [ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000 [ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+) [ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442 [ 4.231481] Hardware name: STM32 (Device Tree Support) [ 4.236627] Workqueue: events_unbound deferred_probe_work_func [ 4.242504] Call trace: [ 4.242522] unwind_backtrace from show_stack+0x10/0x14 [ 4.250218] show_stack from dump_stack_lvl+0x50/0x64 [ 4.255274] dump_stack_lvl from __warn+0x80/0x12c [ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188 [ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164 [ 4.270565] ida_free from rproc_type_release+0x38/0x60 [ 4.275832] rproc_type_release from device_release+0x30/0xa0 [ 4.281601] device_release from kobject_put+0xc4/0x294 [ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c [ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4 [ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc] [ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is properly set.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table The function atomctrl_get_smc_sclk_range_table() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve SMU_Info table, it returns NULL which is later dereferenced. Found by Linux Verification Center (linuxtesting.org) with SVACE. In practice this should never happen as this code only gets called on polaris chips and the vbios data table will always be present on those chips.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles() During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process which will re-order the list if an entry with target pattern is found. And once one is found, should have aborted the list_for_each_entry. But, `break` just aborted the inner for-loop. The outer list_for_each_entry still continues. Normally, only the first entry will match the target pattern, and the re-ordering will change nothing, so there won't be soft lockup. However, in some special cases, soft lockup would happen. Fix it by `goto fill` to break from the list_for_each_entry. The following is a sample of kernel log for this problem. watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055] [...] RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core [...]

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbc: Fix NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Fix the check.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: fix sleeping function called from invalid context at print message Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when cow_file_range() failed [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases) ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: <load btnxpuart.ko> hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested above script for 50,000 iterations and TX timeout error was not observed anymore.

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix channel survey memory allocation size KASAN reported a memory allocation issue in wcn->chan_survey due to incorrect size calculation. This commit uses kcalloc to allocate memory for wcn->chan_survey, ensuring proper initialization and preventing the use of uninitialized values when there are no frames on the channel.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference When iterating over the links of a vif, we need to make sure that the pointer is valid (in other words - that the link exists) before dereferncing it. Use for_each_vif_active_link that also does the check.

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Prevent integer overflow issue In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications.