In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: sof-common: Add NULL check for normal_link string It's not granted that all entries of struct sof_conn_stream declare a `normal_link` (a non-SOF, direct link) string, and this is the case for SoCs that support only SOF paths (hence do not support both direct and SOF usecases). For example, in the case of MT8188 there is no normal_link string in any of the sof_conn_stream entries and there will be more drivers doing that in the future. To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.

An issue was discovered in the Linux kernel brcm_nvram_parse in drivers/nvmem/brcm_nvram.c. Lacks for the check of the return value of kzalloc() can cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Check for port partner validity before consuming it typec_register_partner() does not guarantee partner registration to always succeed. In the event of failure, port->partner is set to the error value or NULL. Given that port->partner validity is not checked, this results in the following crash: Unable to handle kernel NULL pointer dereference at virtual address xx pc : run_state_machine+0x1bc8/0x1c08 lr : run_state_machine+0x1b90/0x1c08 .. Call trace: run_state_machine+0x1bc8/0x1c08 tcpm_state_machine_work+0x94/0xe4 kthread_worker_fn+0x118/0x328 kthread+0x1d0/0x23c ret_from_fork+0x10/0x20 To prevent the crash, check for port->partner validity before derefencing it in all the call sites.

A NULL pointer dereference flaw was found in the Linux kernel AMD Sensor Fusion Hub driver. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue Fix NULL pointer data-races in sk_psock_skb_ingress_enqueue() which syzbot reported [1]. [1] BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueue write to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1: sk_psock_stop_verdict net/core/skmsg.c:1257 [inline] sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843 sk_psock_put include/linux/skmsg.h:459 [inline] sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648 unix_release+0x4b/0x80 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0x68/0x150 net/socket.c:1421 __fput+0x2c1/0x660 fs/file_table.c:422 __fput_sync+0x44/0x60 fs/file_table.c:507 __do_sys_close fs/open.c:1556 [inline] __se_sys_close+0x101/0x1b0 fs/open.c:1541 __x64_sys_close+0x1f/0x30 fs/open.c:1541 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0: sk_psock_data_ready include/linux/skmsg.h:464 [inline] sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555 sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606 sk_psock_verdict_apply net/core/skmsg.c:1008 [inline] sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202 unix_read_skb net/unix/af_unix.c:2546 [inline] unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682 sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223 unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x140/0x180 net/socket.c:745 ____sys_sendmsg+0x312/0x410 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x1e9/0x280 net/socket.c:2667 __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2674 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 value changed: 0xffffffff83d7feb0 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G W 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()") fixed one NULL pointer similarly due to no protection of saved_data_ready. Here is another different caller causing the same issue because of the same reason. So we should protect it with sk_callback_lock read lock because the writer side in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);". To avoid errors that could happen in future, I move those two pairs of lock into the sk_psock_data_ready(), which is suggested by John Fastabend.

A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent NULL dereference in ip6_output() According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix possible cp null dereference cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug

In the Linux kernel, the following vulnerability has been resolved: Julia Lawall reported this null pointer dereference, this should fix it.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions.

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: call request_irq() after NAPI initialized The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The ---truncated---

In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix mas_empty_area_rev() null pointer dereference Currently the code calls mas_start() followed by mas_data_end() if the maple state is MA_START, but mas_start() may return with the maple state node == NULL. This will lead to a null pointer dereference when checking information in the NULL node, which is done in mas_data_end(). Avoid setting the offset if there is no node by waiting until after the maple state is checked for an empty or single entry state. A user could trigger the events to cause a kernel oops by unmapping all vmas to produce an empty maple tree, then mapping a vma that would cause the scenario described above.

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues' Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip>

In the Linux kernel, the following vulnerability has been resolved: xdp: use flags field to disambiguate broadcast redirect When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

An issue was discovered in drivers/media/test-drivers/vidtv/vidtv_bridge.c in the Linux kernel 6.2. There is a NULL pointer dereference in vidtv_mux_stop_thread. In vidtv_stop_streaming, after dvb->mux=NULL occurs, it executes vidtv_mux_stop_thread(dvb->mux).

NVIDIA GPU Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a NULL-pointer dereference, which may lead to denial of service.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: idpf: Fix RSS LUT NULL pointer crash on early ethtool operations The RSS LUT is not initialized until the interface comes up, causing the following NULL pointer crash when ethtool operations like rxhash on/off are performed before the interface is brought up for the first time. Move RSS LUT initialization from ndo_open to vport creation to ensure LUT is always available. This enables RSS configuration via ethtool before bringing the interface up. Simplify LUT management by maintaining all changes in the driver's soft copy and programming zeros to the indirection table when rxhash is disabled. Defer HW programming until the interface comes up if it is down during rxhash and LUT configuration changes. Steps to reproduce: ** Load idpf driver; interfaces will be created modprobe idpf ** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off [89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000 [89408.371908] #PF: supervisor read access in kernel mode [89408.371924] #PF: error_code(0x0000) - not-present page [89408.371940] PGD 0 P4D 0 [89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [89408.372052] RIP: 0010:memcpy_orig+0x16/0x130 [89408.372310] Call Trace: [89408.372317] <TASK> [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf] [89408.372363] __netdev_update_features+0x295/0xde0 [89408.372384] ethnl_set_features+0x15e/0x460 [89408.372406] genl_family_rcv_msg_doit+0x11f/0x180 [89408.372429] genl_rcv_msg+0x1ad/0x2b0 [89408.372446] ? __pfx_ethnl_set_features+0x10/0x10 [89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10 [89408.372482] netlink_rcv_skb+0x58/0x100 [89408.372502] genl_rcv+0x2c/0x50 [89408.372516] netlink_unicast+0x289/0x3e0 [89408.372533] netlink_sendmsg+0x215/0x440 [89408.372551] __sys_sendto+0x234/0x240 [89408.372571] __x64_sys_sendto+0x28/0x30 [89408.372585] x64_sys_call+0x1909/0x1da0 [89408.372604] do_syscall_64+0x7a/0xfa0 [89408.373140] ? clear_bhb_loop+0x60/0xb0 [89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e [89408.378887] </TASK> <snip>

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations.

A NULL pointer dereference flaw was found in the az6027 driver in drivers/media/usb/dev-usb/az6027.c in the Linux Kernel. The message from user space is not checked properly before transferring into the device. This flaw allows a local user to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL deref in fib6_nh_init() syzbot reminds us that in6_dev_get() can return NULL. fib6_nh_init() ip6_validate_gw( &idev ) ip6_route_check_nh( idev ) *idev = in6_dev_get(dev); // can be NULL Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606 Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b RSP: 0018:ffffc900032775a0 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8 RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000 R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8 R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000 FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809 ip6_route_add+0x28/0x160 net/ipv6/route.c:3853 ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483 inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f940f07cea9

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: initialize device's zone info for seeding When performing seeding on a zoned filesystem it is necessary to initialize each zoned device's btrfs_zoned_device_info structure, otherwise mounting the filesystem will cause a NULL pointer dereference. This was uncovered by fstests' testcase btrfs/163.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault() This was missed because of the function pointer indirection. nvidia_smmu_context_fault() is also installed as a irq function, and the 'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain is embedded at a non-zero offset this causes nvidia_smmu_context_fault() to miscompute the offset. Fixup the types. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000 [0000000000000120] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1 Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023 Workqueue: events_unbound deferred_probe_work_func pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : nvidia_smmu_context_fault+0x1c/0x158 lr : __free_irq+0x1d4/0x2e8 sp : ffff80008044b6f0 x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970 x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30 x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000 x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888 x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0 x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000 x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057 Call trace: nvidia_smmu_context_fault+0x1c/0x158 __free_irq+0x1d4/0x2e8 free_irq+0x3c/0x80 devm_free_irq+0x64/0xa8 arm_smmu_domain_free+0xc4/0x158 iommu_domain_free+0x44/0xa0 iommu_deinit_device+0xd0/0xf8 __iommu_group_remove_device+0xcc/0xe0 iommu_bus_notifier+0x64/0xa8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x90 bus_notify+0x44/0x70 device_del+0x264/0x3e8 pci_remove_bus_device+0x84/0x120 pci_remove_root_bus+0x5c/0xc0 dw_pcie_host_deinit+0x38/0xe0 tegra_pcie_config_rp+0xc0/0x1f0 tegra_pcie_dw_probe+0x34c/0x700 platform_probe+0x70/0xe8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x160 driver_probe_device+0x44/0x130 __device_attach_driver+0xc4/0x170 bus_for_each_drv+0x90/0x100 __device_attach+0xa8/0x1c8 device_initial_probe+0x1c/0x30 bus_probe_device+0xb0/0xc0 deferred_probe_work_func+0xbc/0x120 process_one_work+0x194/0x490 worker_thread+0x284/0x3b0 kthread+0xf4/0x108 ret_from_fork+0x10/0x20 Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)

In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 5.17, drivers/phy/tegra/xusb.c mishandles the tegra_xusb_find_port_node return value. Callers expect NULL in the error case, but an error pointer is used.

In the Linux kernel before 5.16.3, drivers/bluetooth/hci_qca.c misinterprets the devm_gpiod_get_index_optional return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 5.16.3, drivers/usb/dwc3/dwc3-qcom.c misinterprets the dwc3_qcom_create_urs_usb_platdev return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 5.15.13, drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c misinterprets the mlx5_get_uars_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 6.2, mm/memory-tiers.c misinterprets the alloc_memory_type return value (expects it to be NULL in the error case, whereas it is actually an error pointer). NOTE: this is disputed by third parties because there are no realistic cases in which a user can cause the alloc_memory_type error case to be reached.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip wbscl_set_scaler_filter if filter is null Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity.

In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task.

A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service.

A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters() On some machines the number of listed CPUs may be bigger than the actual CPUs that exist. The tracing subsystem allocates a per_cpu directory with access to the per CPU ring buffer via a cpuX file. But to save space, the ring buffer will only allocate buffers for online CPUs, even though the CPU array will be as big as the nr_cpu_ids. With the addition of waking waiters on the ring buffer when closing the file, the ring_buffer_wake_waiters() now needs to make sure that the buffer is allocated (with the irq_work allocated with it) before trying to wake waiters, as it will cause a NULL pointer dereference. While debugging this, I added a NULL check for the buffer itself (which is OK to do), and also NULL pointer checks against buffer->buffers (which is not fine, and will WARN) as well as making sure the CPU number passed in is within the nr_cpu_ids (which is also not fine if it isn't). Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705

A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash.

In the Linux kernel, the following vulnerability has been resolved: Revert "usb: typec: ucsi: add a common function ucsi_unregister_connectors()" The recent commit 87d0e2f41b8c ("usb: typec: ucsi: add a common function ucsi_unregister_connectors()") introduced a regression that caused NULL dereference at reading the power supply sysfs. It's a stale sysfs entry that should have been removed but remains with NULL ops. The commit changed the error handling to skip the entries after a NULL con->wq, and this leaves the power device unreleased. For addressing the regression, the straight revert is applied here. Further code improvements can be done from the scratch again.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Lag, fix failure to cancel delayed bond work Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554