In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix use-after-free on error path In the error path of sev_tsm_init_locked(), the code dereferences 't' after it has been freed with kfree(). The pr_err() statement attempts to access t->tio_en and t->tio_init_done after the memory has been released. Move the pr_err() call before kfree(t) to access the fields while the memory is still valid. This issue reported by Smatch static analyser

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: defer hook memory release until rcu readers are done Yiming Qian reports UaF when concurrent process is dumping hooks via nfnetlink_hooks: BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0 Read of size 8 at addr ffff888003edbf88 by task poc/79 Call Trace: <TASK> nfnl_hook_dump_one.isra.0+0xe71/0x10f0 netlink_dump+0x554/0x12b0 nfnl_hook_get+0x176/0x230 [..] Defer release until after concurrent readers have completed.

In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of share_conf in compound request smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state == TREE_CONNECTED on the initial lookup path, but the compound reuse path bypasses this check entirely. If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(), subsequent commands dereference the freed share_conf through work->tcon->share_conf. KASAN report: [ 4.144653] ================================================================== [ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70 [ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44 [ 4.145772] [ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY [ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work [ 4.145888] Call Trace: [ 4.145892] <TASK> [ 4.145894] dump_stack_lvl+0x64/0x80 [ 4.145910] print_report+0xce/0x660 [ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 4.145928] ? smb2_write+0xc74/0xe70 [ 4.145931] kasan_report+0xce/0x100 [ 4.145934] ? smb2_write+0xc74/0xe70 [ 4.145937] smb2_write+0xc74/0xe70 [ 4.145939] ? __pfx_smb2_write+0x10/0x10 [ 4.145942] ? _raw_spin_unlock+0xe/0x30 [ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 4.145948] ? smb2_tree_disconnect+0x31c/0x480 [ 4.145951] handle_ksmbd_work+0x40f/0x1080 [ 4.145953] process_one_work+0x5fa/0xef0 [ 4.145962] ? assign_work+0x122/0x3e0 [ 4.145964] worker_thread+0x54b/0xf70 [ 4.145967] ? __pfx_worker_thread+0x10/0x10 [ 4.145970] kthread+0x346/0x470 [ 4.145976] ? recalc_sigpending+0x19b/0x230 [ 4.145980] ? __pfx_kthread+0x10/0x10 [ 4.145984] ret_from_fork+0x4fb/0x6c0 [ 4.145992] ? __pfx_ret_from_fork+0x10/0x10 [ 4.145995] ? __switch_to+0x36c/0xbe0 [ 4.145999] ? __pfx_kthread+0x10/0x10 [ 4.146003] ret_from_fork_asm+0x1a/0x30 [ 4.146013] </TASK> [ 4.146014] [ 4.149858] Allocated by task 44: [ 4.149953] kasan_save_stack+0x33/0x60 [ 4.150061] kasan_save_track+0x14/0x30 [ 4.150169] __kasan_kmalloc+0x8f/0xa0 [ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0 [ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600 [ 4.150529] smb2_tree_connect+0x2e6/0x1000 [ 4.150645] handle_ksmbd_work+0x40f/0x1080 [ 4.150761] process_one_work+0x5fa/0xef0 [ 4.150873] worker_thread+0x54b/0xf70 [ 4.150978] kthread+0x346/0x470 [ 4.151071] ret_from_fork+0x4fb/0x6c0 [ 4.151176] ret_from_fork_asm+0x1a/0x30 [ 4.151286] [ 4.151332] Freed by task 44: [ 4.151418] kasan_save_stack+0x33/0x60 [ 4.151526] kasan_save_track+0x14/0x30 [ 4.151634] kasan_save_free_info+0x3b/0x60 [ 4.151751] __kasan_slab_free+0x43/0x70 [ 4.151861] kfree+0x1ca/0x430 [ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190 [ 4.152088] smb2_tree_disconnect+0x1cd/0x480 [ 4.152211] handle_ksmbd_work+0x40f/0x1080 [ 4.152326] process_one_work+0x5fa/0xef0 [ 4.152438] worker_thread+0x54b/0xf70 [ 4.152545] kthread+0x346/0x470 [ 4.152638] ret_from_fork+0x4fb/0x6c0 [ 4.152743] ret_from_fork_asm+0x1a/0x30 [ 4.152853] [ 4.152900] The buggy address belongs to the object at ffff88810430c180 [ 4.152900] which belongs to the cache kmalloc-96 of size 96 [ 4.153226] The buggy address is located 20 bytes inside of [ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0) [ 4.153549] [ 4.153596] The buggy address belongs to the physical page: [ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c [ 4.154000] flags: 0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to assert that this is resolved (and confirmed that the tests failed prior to this). I also cleaned up vma_expand() as part of this work, renamed vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was unduly confusing, and simplified the comments around this function. This patch (of 4): Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. The key piece of logic introduced was the ability to merge a faulted VMA immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to correctly handle anon_vma state. In the case of the merge of an existing VMA (that is changing properties of a VMA and then merging if those properties are shared by adjacent VMAs), dup_anon_vma() is invoked correctly. However in the case of the merge of a new VMA, a corner case peculiar to mremap() was missed. The issue is that vma_expand() only performs dup_anon_vma() if the target (the VMA that will ultimately become the merged VMA): is not the next VMA, i.e. the one that appears after the range in which the new VMA is to be established. A key insight here is that in all other cases other than mremap(), a new VMA merge either expands an existing VMA, meaning that the target VMA will be that VMA, or would have anon_vma be NULL. Specifically: * __mmap_region() - no anon_vma in place, initial mapping. * do_brk_flags() - expanding an existing VMA. * vma_merge_extend() - expanding an existing VMA. * relocate_vma_down() - no anon_vma in place, initial mapping. In addition, we are in the unique situation of needing to duplicate anon_vma state from a VMA that is neither the previous or next VMA being merged with. dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted case. This leaves four possibilities, in each case where the copied VMA is faulted: 1. Previous VMA unfaulted: copied -----| ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c binder_transaction+0x584/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Freed by task 488: kfree+0x1d0/0x420 binder_free_transaction+0x150/0x234 binder_thread_read+0x2d08/0x3ce4 binder_ioctl+0x488/0x2940 [...] ================================================================== Instead, make a transaction copy so the data can be safely accessed by binder_netlink_report() after a pending frozen error. While here, add a comment about not using t->buffer in binder_netlink_report().

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, &params, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix use-after-free in ublk_partition_scan_work A race condition exists between the async partition scan work and device teardown that can lead to a use-after-free of ub->ub_disk: 1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk() 2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does: - del_gendisk(ub->ub_disk) - ublk_detach_disk() sets ub->ub_disk = NULL - put_disk() which may free the disk 3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk leading to UAF Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold a reference to the disk during the partition scan. The spinlock in ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker either gets a valid reference or sees NULL and exits early. Also change flush_work() to cancel_work_sync() to avoid running the partition scan work unnecessarily when the disk is already detached.

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u

In the Linux kernel, the following vulnerability has been resolved: erofs: fix UAF issue for file-backed mounts w/ directio option [ 9.269940][ T3222] Call trace: [ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108 [ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198 [ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180 [ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24 [ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac [ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220 [ 9.270083][ T3222] filemap_read_folio+0x60/0x120 [ 9.270102][ T3222] filemap_fault+0xcac/0x1060 [ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554 [ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c [ 9.270142][ T3222] do_page_fault+0x178/0x88c [ 9.270167][ T3222] do_translation_fault+0x38/0x54 [ 9.270183][ T3222] do_mem_abort+0x54/0xac [ 9.270208][ T3222] el0_da+0x44/0x7c [ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4 [ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0 EROFS may encounter above panic when enabling file-backed mount w/ directio mount option, the root cause is it may suffer UAF in below race condition: - z_erofs_read_folio wq s_dio_done_wq - z_erofs_runqueue - erofs_fileio_submit_bio - erofs_fileio_rq_submit - vfs_iocb_iter_read - ext4_file_read_iter - ext4_dio_read_iter - iomap_dio_rw : bio was submitted and return -EIOCBQUEUED - dio_aio_complete_work - dio_complete - dio->iocb->ki_complete (erofs_fileio_ki_complete()) - kfree(rq) : it frees iocb, iocb.ki_filp can be UAF in file_accessed(). - file_accessed : access NULL file point Introduce a reference count in struct erofs_fileio_rq, and initialize it as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will decrease reference count, the last one decreasing the reference count to zero will free rq.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix use-after-free in inet6_addr_del(). syzbot reported use-after-free of inet6_ifaddr in inet6_addr_del(). [0] The cited commit accidentally moved ipv6_del_addr() for mngtmpaddr before reading its ifp->flags for temporary addresses in inet6_addr_del(). Let's move ipv6_del_addr() down to fix the UAF. [0]: BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593 CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181 inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f164cf8f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749 RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003 RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288 </TASK> Allocated by task 9593: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120 inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050 addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160 inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6099: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free_freelist_hook mm/slub.c:2569 [inline] slab_free_bulk mm/slub.c:6696 [inline] kmem_cache_free_bulk mm/slub.c:7383 [inline] kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362 kfree_bulk include/linux/slab.h:830 [inline] kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523 kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline] kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801 process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257 process_scheduled_works kernel/workqu ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation.

In the Linux kernel, the following vulnerability has been resolved: cgroup/dmem: avoid pool UAF An UAF issue was observed: BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150 Write of size 8 at addr ffff888106715440 by task insmod/527 CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11 Tainted: [O]=OOT_MODULE Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 kasan_report+0xca/0x100 kasan_check_range+0x39/0x1c0 page_counter_uncharge+0x65/0x150 dmem_cgroup_uncharge+0x1f/0x260 Allocated by task 527: Freed by task 0: The buggy address belongs to the object at ffff888106715400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 64 bytes inside of freed 512-byte region [ffff888106715400, ffff888106715600) The buggy address belongs to the physical page: Memory state around the buggy address: ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb The issue occurs because a pool can still be held by a caller after its associated memory region is unregistered. The current implementation frees the pool even if users still hold references to it (e.g., before uncharge operations complete). This patch adds a reference counter to each pool, ensuring that a pool is only freed when its reference count drops to zero.

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF.

In the Linux kernel, the following vulnerability has been resolved: futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy() During futex_key_to_node_opt() execution, vma->vm_policy is read under speculative mmap lock and RCU. Concurrently, mbind() may call vma_replace_policy() which frees the old mempolicy immediately via kmem_cache_free(). This creates a race where __futex_key_to_node() dereferences a freed mempolicy pointer, causing a use-after-free read of mpol->mode. [ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349) [ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87 [ 151.415969] Call Trace: [ 151.416732] __asan_load2 (mm/kasan/generic.c:271) [ 151.416777] __futex_key_to_node (kernel/futex/core.c:349) [ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593) Fix by adding rcu to __mpol_put().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix race in concurrent f2fs_stop_gc_thread In my test case, concurrent calls to f2fs shutdown report the following stack trace: Oops: general protection fault, probably for non-canonical address 0xc6cfff63bb5513fc: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 678 Comm: f2fs_rep_shutdo Not tainted 6.12.0-rc5-next-20241029-g6fb2fa9805c5-dirty #85 Call Trace: <TASK> ? show_regs+0x8b/0xa0 ? __die_body+0x26/0xa0 ? die_addr+0x54/0x90 ? exc_general_protection+0x24b/0x5c0 ? asm_exc_general_protection+0x26/0x30 ? kthread_stop+0x46/0x390 f2fs_stop_gc_thread+0x6c/0x110 f2fs_do_shutdown+0x309/0x3a0 f2fs_ioc_shutdown+0x150/0x1c0 __f2fs_ioctl+0xffd/0x2ac0 f2fs_ioctl+0x76/0xe0 vfs_ioctl+0x23/0x60 __x64_sys_ioctl+0xce/0xf0 x64_sys_call+0x2b1b/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e The root cause is a race condition in f2fs_stop_gc_thread() called from different f2fs shutdown paths: [CPU0] [CPU1] ---------------------- ----------------------- f2fs_stop_gc_thread f2fs_stop_gc_thread gc_th = sbi->gc_thread gc_th = sbi->gc_thread kfree(gc_th) sbi->gc_thread = NULL < gc_th != NULL > kthread_stop(gc_th->f2fs_gc_task) //UAF The commit c7f114d864ac ("f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()") attempted to fix this issue by using a read semaphore to prevent races between shutdown and remount threads, but it fails to prevent all race conditions. Fix it by converting to write lock of s_umount in f2fs_do_shutdown().

A use-after-free flaw was found in the Linux kernel’s SGI GRU driver in the way the first gru_file_unlocked_ioctl function is called by the user, where a fail pass occurs in the gru_check_chiplet_assignment function. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel 6.0.8, there is a use-after-free in ntfs_trim_fs in fs/ntfs3/bitmap.c.

A vulnerability was found in Linux Kernel, where a refcount leak in llcp_sock_connect() causing use-after-free which might lead to privilege escalations.

In the Linux kernel, the following vulnerability has been resolved: Input: lkkbd - disable pending work before freeing device lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work handler lkkbd_reinit() dereferences the lkkbd structure and its serio/input_dev fields. lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd structure without preventing the reinit work from being queued again until serio_close() returns. This can allow the work handler to run after the structure has been freed, leading to a potential use-after-free. Use disable_work_sync() instead of cancel_work_sync() to ensure the reinit work cannot be re-queued, and call it both in lkkbd_disconnect() and in lkkbd_connect() error paths after serio_open().

In the Linux kernel, the following vulnerability has been resolved: powerpc/mm/fault: Fix kfence page fault reporting copy_from_kernel_nofault() can be called when doing read of /proc/kcore. /proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults. Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault(). This can be easily triggered if someone tries to do dd from /proc/kcore. eg. dd if=/proc/kcore of=/dev/null bs=1M Some example false negatives: =============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000: copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2): copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec

A vulnerability was found in the Linux Kernel where the function sunkbd_reinit having been scheduled by sunkbd_interrupt before sunkbd being freed. Though the dangling pointer is set to NULL in sunkbd_disconnect, there is still an alias in sunkbd_reinit causing Use After Free.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: remove call_control in inactive contexts If damon_call() is executed against a DAMON context that is not running, the function returns error while keeping the damon_call_control object linked to the context's call_controls list. Let's suppose the object is deallocated after the damon_call(), and yet another damon_call() is executed against the same context. The function tries to add the new damon_call_control object to the call_controls list, which still has the pointer to the previous damon_call_control object, which is deallocated. As a result, use-after-free happens. This can actually be triggered using the DAMON sysfs interface. It is not easily exploitable since it requires the sysfs write permission and making a definitely weird file writes, though. Please refer to the report for more details about the issue reproduction steps. Fix the issue by making two changes. Firstly, move the final kdamond_call() for cancelling all existing damon_call() requests from terminating DAMON context to be done before the ctx->kdamond reset. This makes any code that sees NULL ctx->kdamond can safely assume the context may not access damon_call() requests anymore. Secondly, let damon_call() to cleanup the damon_call_control objects that were added to the already-terminated DAMON context, before returning the error.

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly.

In the Linux kernel, the following vulnerability has been resolved: net/smc: do not leave a dangling sk pointer in __smc_create() Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC: smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0 WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563 Modules linked in: CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563 Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7 RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246 RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50 R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8 R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0 FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_create net/socket.c:1616 [inline] __sys_socket_create net/socket.c:1653 [inline] __sys_socket+0x150/0x3c0 net/socket.c:1700 __do_sys_socket net/socket.c:1714 [inline] __se_sys_socket net/socket.c:1712 [inline] For reference, see commit 2d859aff775d ("Merge branch 'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible badness in FREE_STATEID When multiple FREE_STATEIDs are sent for the same delegation stateid, it can lead to a possible either use-after-free or counter refcount underflow errors. In nfsd4_free_stateid() under the client lock we find a delegation stateid, however the code drops the lock before calling nfs4_put_stid(), that allows another FREE_STATE to find the stateid again. The first one will proceed to then free the stateid which leads to either use-after-free or decrementing already zeroed counter.

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The cause of the issue was that eth_skb_pkt_type() accessed skb's data that didn't contain an Ethernet header. This occurs when bpf_prog_test_run_xdp() passes an invalid value as the user_data argument to bpf_test_init(). Fix this by returning an error when user_data is less than ETH_HLEN in bpf_test_init(). Additionally, remove the check for "if (user_size > size)" as it is unnecessary. [1] BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [inline] __se_sys_bpf kernel/bpf/syscall.c:5864 [inline] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: free_pages_prepare mm/page_alloc.c:1056 [inline] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [inline] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 worker_thread+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: nfsd: clear acl_access/acl_default after releasing them If getting acl_default fails, acl_access and acl_default will be released simultaneously. However, acl_access will still retain a pointer pointing to the released posix_acl, which will trigger a WARNING in nfs3svc_release_getacl like this: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28 refcount_warn_saturate+0xb5/0x170 Modules linked in: CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted 6.12.0-rc6-00079-g04ae226af01f-dirty #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb5/0x170 Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75 e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb cd 0f b6 1d 8a3 RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380 RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56 R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001 R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0 FS: 0000000000000000(0000) GS:ffff88871ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? refcount_warn_saturate+0xb5/0x170 ? __warn+0xa5/0x140 ? refcount_warn_saturate+0xb5/0x170 ? report_bug+0x1b1/0x1e0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? tick_nohz_tick_stopped+0x1e/0x40 ? refcount_warn_saturate+0xb5/0x170 ? refcount_warn_saturate+0xb5/0x170 nfs3svc_release_getacl+0xc9/0xe0 svc_process_common+0x5db/0xb60 ? __pfx_svc_process_common+0x10/0x10 ? __rcu_read_unlock+0x69/0xa0 ? __pfx_nfsd_dispatch+0x10/0x10 ? svc_xprt_received+0xa1/0x120 ? xdr_init_decode+0x11d/0x190 svc_process+0x2a7/0x330 svc_handle_xprt+0x69d/0x940 svc_recv+0x180/0x2d0 nfsd+0x168/0x200 ? __pfx_nfsd+0x10/0x10 kthread+0x1a2/0x1e0 ? kthread+0xf4/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... Clear acl_access/acl_default after posix_acl_release is called to prevent UAF from being triggered.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ]

A flaw use after free in the Linux kernel video4linux driver was found in the way user triggers em28xx_usb_probe() for the Empia 28xx based TV cards. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared.

net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node() Previously, btrfs_get_or_create_delayed_node() set the delayed_node's refcount before acquiring the root->delayed_nodes lock. Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") moved refcount_set inside the critical section, which means there is no longer a memory barrier between setting the refcount and setting btrfs_inode->delayed_node. Without that barrier, the stores to node->refs and btrfs_inode->delayed_node may become visible out of order. Another thread can then read btrfs_inode->delayed_node and attempt to increment a refcount that hasn't been set yet, leading to a refcounting bug and a use-after-free warning. The fix is to move refcount_set back to where it was to take advantage of the implicit memory barrier provided by lock acquisition. Because the allocations now happen outside of the lock's critical section, they can use GFP_NOFS instead of GFP_ATOMIC.

In the Linux kernel, the following vulnerability has been resolved: net: explicitly clear the sk pointer, when pf->create fails We have recently noticed the exact same KASAN splat as in commit 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails"). The problem is that commit did not fully address the problem, as some pf->create implementations do not use sk_common_release in their error paths. For example, we can use the same reproducer as in the above commit, but changing ping to arping. arping uses AF_PACKET socket and if packet_create fails, it will just sk_free the allocated sk object. While we could chase all the pf->create implementations and make sure they NULL the freed sk object on error from the socket, we can't guarantee future protocols will not make the same mistake. So it is easier to just explicitly NULL the sk pointer upon return from pf->create in __sock_create. We do know that pf->create always releases the allocated sk object on error, so if the pointer is not NULL, it is definitely dangling.