TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.

Improper neutralization of special elements used in a user input allows an authenticated malicious user to perform remote code execution in the host system. This vulnerability impacts SonicWall Switch 1.1.1.0-2s and earlier versions

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.

The vulnerability may allow a remote low priviledged attacker to run arbitrary shell commands by using lower-level functions to interact with the device.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

A flaw has been found in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formSysCmd. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

Netgear WG302v2 v5.2.9 and WAG302v2 v5.1.19 were discovered to contain multiple command injection vulnerabilities in the upgrade_handler function via the firmwareRestore and firmwareServerip parameters.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

A vulnerability was detected in UTT HiPER 810 1.7.4-141218. The impacted element is the function sub_43F020 of the file /goform/formPdbUpConfig. Performing a manipulation of the argument policyNames results in command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

The API endpoints in Ironman PowerShell Universal 3.0.0 through 4.2.0 allow remote attackers to execute arbitrary commands via crafted HTTP requests if a param block is used, due to invalid sanitization of input strings. The fixed versions are 3.10.2, 4.1.10, and 4.2.1.

CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.2.1 and later

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payloads to achieve command injection when entering the container terminal. The vulnerability has been fixed in v1.3.6.

A vulnerability was identified in XixianLiang HarmonyOS-mcp-server 0.1.0. This vulnerability affects the function input_text. The manipulation of the argument text leads to os command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with read-only privileges to perform command injection attacks on an affected system and execute arbitrary commands as the root user. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

A vulnerability was detected in Totolink WA300 5.2cu.7112_B20190227. The impacted element is the function setAPNetwork of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Ipaddr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

A security flaw has been discovered in D-Link DIR-823X 250416. Impacted is the function sub_41E2A0 of the file /goform/set_mode. Performing a manipulation of the argument lan_gateway results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.

A security vulnerability has been detected in D-Link DWR-M961 1.1.47. The affected element is an unknown function of the file /boafrm/formLtefotaUpgradeFibocom. Such manipulation of the argument fota_url leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

Azure Identity SDK Remote Code Execution Vulnerability

Azure Identity SDK Remote Code Execution Vulnerability

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.

An issue found in D-Link DSL-3782 v.1.03 and before allows remote authenticated users to execute arbitrary code as root via the Router IP Address fields of the network settings page.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23557.

A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. This issue affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Such manipulation of the argument command leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Totolink NR1800X 9.1.0u.6279_B20210910. This vulnerability affects the function setWanCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. This manipulation of the argument Hostname causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

ALGO 8180 IP Audio Alerter Ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-25568.

A security flaw has been discovered in Tenda AC21 1.1.1.1/1.dmzip/16.03.08.16. The impacted element is the function mDMZSetCfg of the file /goform/mDMZSetCfg. The manipulation of the argument dmzIp results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in D-Link DWR-M961 1.1.47. This vulnerability affects the function sub_419920 of the file /boafrm/formLtefotaUpgradeQuectel. This manipulation of the argument fota_url causes command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A vulnerability was detected in D-Link DWR-M961 1.1.47. The impacted element is the function sub_4250E0 of the file /boafrm/formSmsManage of the component SMS Message. Performing a manipulation of the argument action_value results in command injection. The attack may be initiated remotely. The exploit is now public and may be used.

A flaw has been found in Totolink A7000R 4.1cu.4154. This impacts the function CloudACMunualUpdateUserdata of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument url causes command injection. The attack can be initiated remotely. The exploit has been published and may be used.

A vulnerability was detected in kalcaddle kodbox up to 1.61.10. This issue affects some unknown processing of the file /?explorer/index/zip of the component Compression Handler. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

jcvi is a Python library to facilitate genome assembly, annotation, and comparative genomics. A configuration injection happens when user input is considered by the application in an unsanitized format and can reach the configuration file. A malicious user may craft a special payload that may lead to a command injection. The impact of a configuration injection may vary. Under some conditions, it may lead to command injection if there is for instance shell code execution from the configuration file values. This vulnerability does not currently have a fix.

Command Injection Vulnerability in GitHub repository hestiacp/hestiacp prior to 1.5.12. An authenticated remote attacker with low privileges can execute arbitrary code under root context.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8 and Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8 allow command injection by authenticated users, aka OSFOURK-23554.