A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system. This vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.

Multiple vulnerabilities in Cisco Routed PON Controller Software, which runs as a docker container on hardware that is supported by Cisco IOS XR Software, could allow an authenticated, remote attacker with Administrator-level privileges on the PON Manager or direct access to the PON Manager MongoDB instance to perform command injection attacks on the PON Controller container and execute arbitrary commands as root. These vulnerabilities are due to insufficient validation of arguments that are passed to specific configuration commands. An attacker could exploit these vulnerabilities by including crafted input as the argument of an affected configuration command. A successful exploit could allow the attacker to execute arbitrary commands as root on the PON controller.

LibreNMS versions before 26.3.0 are affected by an authenticated remote code execution vulnerability by abusing the Binary Locations config and the Netcommand feature. Successful exploitation requires administrative privileges. Exploitation could result in compromise of the underlying web server.

Command injection in alerts in CoolerControl/coolercontrold <4.0.0 allows authenticated attackers to execute arbitrary code as root via injected bash commands in alert names

A security flaw has been discovered in Tenda AC8 16.03.50.11. This affects the function route_set_user_policy_rule of the file /cgi-bin/UploadCfg of the component Web Interface. The manipulation of the argument wans.policy.list1 results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in TOTOLINK X6000R 9.4.0cu.1360_B20241207/9.4.0cu.1498_B20250826. Affected by this issue is the function setLanCfg of the file /usr/sbin/shttpd. Executing a manipulation of the argument Hostname can lead to os command injection. The attack may be launched remotely.

An improper neutralization of special elements vulnerability was identified in GitHub Enterprise Server that allowed an authenticated Management Console administrator to execute arbitrary OS commands via shell metacharacter injection in proxy configuration fields such as http_proxy. Exploitation of this vulnerability required access to the GitHub Enterprise Server instance and administrator privileges to the Management Console. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.1, 3.19.5, 3.18.8, 3.17.14, 3.16.17, 3.15.21, 3.14.26. This vulnerability was reported via the GitHub Bug Bounty program.

FreePBX api module version 17.0.8 and prior contain a command injection vulnerability in the initiateGqlAPIProcess() function where GraphQL mutation input fields are passed directly to shell_exec() without sanitization or escaping. An authenticated user with a valid bearer token can send a GraphQL moduleOperations mutation with backtick-wrapped commands in the module field to execute arbitrary commands on the underlying host as the web server user.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.

Some Hikvision Wireless Access Point are vulnerable to authenticated remote command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.

A command injection vulnerability has been identified in the command line interface of the HPE Aruba Networking Airwave Platform. An authenticated attacker could exploit this vulnerability to execute arbitrary operating system commands with elevated privileges on the underlying operating system.

IBM Lakehouse (watsonx.data 2.2) could allow an authenticated privileged user to execute arbitrary commands on the system due to improper validation of user supplied input.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability classified as critical was found in westboy CicadasCMS 2.0. This vulnerability affects unknown code of the file /system/schedule/save of the component Scheduled Task Handler. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

An OS command injection issue exists in multiple versions of TB-eye network recorders and AHD recorders. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who is logging in to the device.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

A post authentication command injection vulnerability exists when setting up the PPTP global configuration of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Loomio version 2.22.0 allows executing arbitrary commands on the server. This is possible because the application is vulnerable to OS Command Injection.

A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN Gateways Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system.

An OS command injection vulnerability within the update functionality may allow an authenticated administrator to execute unauthorized arbitrary OS commands. Users with administrative privileges may upload update packages to upgrade the versions of Nozomi Networks Guardian and CMC. While these updates are signed and their signatures are validated prior to installation, an improper signature validation check has been identified. This issue could potentially enable users to execute commands remotely on the appliance, thereby impacting confidentiality, integrity, and availability.

The Four-Faith router models F3x24 and F3x36 are affected by an operating system (OS) command injection vulnerability. At least firmware version 2.0 allows authenticated and remote attackers to execute arbitrary OS commands over HTTP when modifying the system time via apply.cgi. Additionally, this firmware version has default credentials which, if not changed, would effectively change this vulnerability into an unauthenticated and remote OS command execution issue.

A post-authentication command injection vulnerability in the "ZyEE" function of the Zyxel EX5601-T1 firmware version V5.70(ACDZ.3.6)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A post-authentication command injection vulnerability in the ”zyUtilMailSend” function of the Zyxel AX7501-B1 firmware version V5.17(ABPC.5.3)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

Certain models of routers from Billion Electric has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject arbitrary system commands into a specific SSH function and execute them on the device.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

An issue was discovered in certain Oi third-party firmware that may be installed on Technicolor TD5130v2 devices. A Command Injection in the Ping module in the Web Interface in OI_Fw_V20 allows remote attackers to execute arbitrary OS commands in the pingAddr parameter to mnt_ping.cgi. NOTE: This may overlap CVE-2017–14127.

Nagios XI versions prior to 2026R1 contain a remote code execution vulnerability in the Core Config Manager (CCM) Run Check command. Insufficient validation/escaping of parameters used to build backend command lines allows an authenticated administrator to inject shell metacharacters that are executed on the server. Successful exploitation results in arbitrary command execution with the privileges of the Nagios XI web application user and can be leveraged to gain control of the underlying host operating system.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Nagios XI versions prior to 2024R1.4.2 contain a remote code execution vulnerability in the Business Process Intelligence (BPI) component. Insufficient validation and sanitization of administrator-controlled BPI configuration parameters (notably bpi_logfile and bpi_configfile) allow an authenticated administrative user to cause the product to create or overwrite files within the webroot and subsequently edit them via the BPI configuration editor. When such files carry executable extensions and are served by the web application, arbitrary code may be executed in the context of the web application user. Successful exploitation results in arbitrary command execution with the privileges of the Nagios XI web application user and can be leveraged to gain further control of the underlying host operating system.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Advantech WebAccess/VPN versions prior to 1.1.5 contain a command injection vulnerability in AppManagementController.appUpgradeAction() that allows an authenticated system administrator to execute arbitrary commands as the web server user (www-data) by supplying a crafted uploaded filename.

Nagios XI < 2026R1 is vulnerable to an authenticated command injection vulnerability within the MongoDB Database, MySQL Query, MySQL Server, Postgres Server, and Postgres Query wizards. It is possible to inject shell characters into arguments provided to the service and execute arbitrary system commands on the underlying host as the `nagios` user.

An authenticated remote code execution vulnerability exists in Pandora FMS version 7.0NG and earlier. The net_tools.php functionality allows authenticated users to execute arbitrary OS commands via the select_ips parameter when performing network tools operations, such as pinging. This occurs because user input is not properly sanitized before being passed to system commands, enabling command injection.

The Backup Migration plugin for WordPress is vulnerable to OS Command Injection in all versions up to, and including, 1.3.9 via the 'url' parameter. This vulnerability allows authenticated attackers, with administrator-level permissions and above, to execute arbitrary commands on the host operating system.

Nagios Log Server versions prior to 2026R1.0.1 contain an authenticated command injection vulnerability in the experimental 'Natural Language Queries' feature. When this feature is configured, certain user-controlled settings—including model selection and connection parameters—are read from the global configuration and concatenated into a shell command that is executed via shell_exec() without proper input handling or command-line argument sanitation. An authenticated user with access to the 'Global Settings' page can supply crafted values in these fields to inject additional shell commands, resulting in arbitrary command execution as the 'www-data' user and compromise of the Log Server host.

A command injection vulnerability exists in the com.webos.service.connectionmanager/tv/setVlanStaticAddress endpoint on webOS versions 5 and 6. A series of specially crafted requests can lead to command execution as the dbus user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB

Emissary is a P2P based data-driven workflow engine. Prior to 8.39.0, the Executrix utility class constructed shell commands by concatenating configuration-derived values — including the PLACE_NAME parameter — with insufficient sanitization. Only spaces were replaced with underscores, allowing shell metacharacters (;, |, $, `, (, ), etc.) to pass through into /bin/sh -c command execution. This vulnerability is fixed in 8.39.0.

A command injection vulnerability exists in the getAudioMetadata method from the com.webos.service.attachedstoragemanager service on webOS version 4 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. * webOS 4.9.7 - 5.30.40 running on LG43UM7000PLA  * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

Nagios Network Analyzer versions prior to 2024R2.0.1 contain a vulnerability in the LDAP certificate management functionality whereby the certificate removal operation fails to apply adequate input sanitation. An authenticated administrator can trigger command execution on the underlying host in the context of the web application service, resulting in remote code execution with the service's privileges.

A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP.