In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future.

In the Linux kernel, the following vulnerability has been resolved: jfs: jfs_dmap: Validate db_l2nbperpage while mounting In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block number inside dbFree(). db_l2nbperpage, which is the log2 number of blocks per page, is passed as an argument to BLKTODMAP which uses it for shifting. Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is too big. This happens because the large value is set without any validation in dbMount() at line 181. Thus, make sure that db_l2nbperpage is correct while mounting. Max number of blocks per page = Page size / Min block size => log2(Max num_block per page) = log2(Page size / Min block size) = log2(Page size) - log2(Min block size) => Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels The cacheinfo sets up the shared_cpu_map by checking whether the caches with the same index are shared between CPUs. However, this will trigger slab-out-of-bounds access if the CPUs do not have the same cache hierarchy. Another problem is the mismatched shared_cpu_map when the shared cache does not have the same index between CPUs. CPU0 I D L3 index 0 1 2 x ^ ^ ^ ^ index 0 1 2 3 CPU1 I D L2 L3 This patch checks each cache is shared with all caches on other CPUs.

In the Linux kernel, the following vulnerability has been resolved: soundwire: qcom: fix storing port config out-of-bounds The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Enhance the attribute size check This combines the overflow and boundary check so that all attribute size will be properly examined while enumerating them. [ 169.181521] BUG: KASAN: slab-out-of-bounds in run_unpack+0x2e3/0x570 [ 169.183161] Read of size 1 at addr ffff8880094b6240 by task mount/247 [ 169.184046] [ 169.184925] CPU: 0 PID: 247 Comm: mount Not tainted 6.0.0-rc7+ #3 [ 169.185908] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 169.187066] Call Trace: [ 169.187492] <TASK> [ 169.188049] dump_stack_lvl+0x49/0x63 [ 169.188495] print_report.cold+0xf5/0x689 [ 169.188964] ? run_unpack+0x2e3/0x570 [ 169.189331] kasan_report+0xa7/0x130 [ 169.189714] ? run_unpack+0x2e3/0x570 [ 169.190079] __asan_load1+0x51/0x60 [ 169.190634] run_unpack+0x2e3/0x570 [ 169.191290] ? run_pack+0x840/0x840 [ 169.191569] ? run_lookup_entry+0xb3/0x1f0 [ 169.192443] ? mi_enum_attr+0x20a/0x230 [ 169.192886] run_unpack_ex+0xad/0x3e0 [ 169.193276] ? run_unpack+0x570/0x570 [ 169.193557] ? ni_load_mi+0x80/0x80 [ 169.193889] ? debug_smp_processor_id+0x17/0x20 [ 169.194236] ? mi_init+0x4a/0x70 [ 169.194496] attr_load_runs_vcn+0x166/0x1c0 [ 169.194851] ? attr_data_write_resident+0x250/0x250 [ 169.195188] mi_read+0x133/0x2c0 [ 169.195481] ntfs_iget5+0x277/0x1780 [ 169.196017] ? call_rcu+0x1c7/0x330 [ 169.196392] ? ntfs_get_block_bmap+0x70/0x70 [ 169.196708] ? evict+0x223/0x280 [ 169.197014] ? __kmalloc+0x33/0x540 [ 169.197305] ? wnd_init+0x15b/0x1b0 [ 169.197599] ntfs_fill_super+0x1026/0x1ba0 [ 169.197994] ? put_ntfs+0x1d0/0x1d0 [ 169.198299] ? vsprintf+0x20/0x20 [ 169.198583] ? mutex_unlock+0x81/0xd0 [ 169.198930] ? set_blocksize+0x95/0x150 [ 169.199269] get_tree_bdev+0x232/0x370 [ 169.199750] ? put_ntfs+0x1d0/0x1d0 [ 169.200094] ntfs_fs_get_tree+0x15/0x20 [ 169.200431] vfs_get_tree+0x4c/0x130 [ 169.200714] path_mount+0x654/0xfe0 [ 169.201067] ? putname+0x80/0xa0 [ 169.201358] ? finish_automount+0x2e0/0x2e0 [ 169.201965] ? putname+0x80/0xa0 [ 169.202445] ? kmem_cache_free+0x1c4/0x440 [ 169.203075] ? putname+0x80/0xa0 [ 169.203414] do_mount+0xd6/0xf0 [ 169.203719] ? path_mount+0xfe0/0xfe0 [ 169.203977] ? __kasan_check_write+0x14/0x20 [ 169.204382] __x64_sys_mount+0xca/0x110 [ 169.204711] do_syscall_64+0x3b/0x90 [ 169.205059] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 169.205571] RIP: 0033:0x7f67a80e948a [ 169.206327] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 169.208296] RSP: 002b:00007ffddf020f58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 169.209253] RAX: ffffffffffffffda RBX: 000055e2547a6060 RCX: 00007f67a80e948a [ 169.209777] RDX: 000055e2547a6260 RSI: 000055e2547a62e0 RDI: 000055e2547aeaf0 [ 169.210342] RBP: 0000000000000000 R08: 000055e2547a6280 R09: 0000000000000020 [ 169.210843] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055e2547aeaf0 [ 169.211307] R13: 000055e2547a6260 R14: 0000000000000000 R15: 00000000ffffffff [ 169.211913] </TASK> [ 169.212304] [ 169.212680] Allocated by task 0: [ 169.212963] (stack is not available) [ 169.213200] [ 169.213472] The buggy address belongs to the object at ffff8880094b5e00 [ 169.213472] which belongs to the cache UDP of size 1152 [ 169.214095] The buggy address is located 1088 bytes inside of [ 169.214095] 1152-byte region [ffff8880094b5e00, ffff8880094b6280) [ 169.214639] [ 169.215004] The buggy address belongs to the physical page: [ 169.215766] page:000000002e324c8c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94b4 [ 169.218412] head:000000002e324c8c order:2 compound_mapcount:0 compound_pincount:0 [ 169.219078] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 169.220272] raw: 000fffffc0010200 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/i915/perf: add sentinel to xehp_oa_b_counters Arrays passed to reg_in_range_table should end with empty record. The patch solves KASAN detected bug with signature: BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Read of size 4 at addr ffffffffa1555d90 by task perf/1518 CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1 Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 Call Trace: <TASK> ... xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] (cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798)

In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible desc_ptr out-of-bounds accesses Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process().

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix an illegal memory access In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix struct pid leaks in OOB support syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait on block writeback for post_read case If inode is compressed, but not encrypted, it missed to call f2fs_wait_on_block_writeback() to wait for GCed page writeback in IPU write path. Thread A GC-Thread - f2fs_gc - do_garbage_collect - gc_data_segment - move_data_block - f2fs_submit_page_write migrate normal cluster's block via meta_inode's page cache - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_submit_page_bio IRQ - f2fs_read_end_io IRQ old data overrides new data due to out-of-order GC and common IO. - f2fs_read_end_io

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not attempt to read past "commit" When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway.

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks() When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs).

In the Linux kernel, the following vulnerability has been resolved: tty: Fix out-of-bound vmalloc access in imageblit This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently.

In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions if the arguments to `tf.raw_ops.RaggedGather` don't determine a valid ragged tensor code can trigger a read from outside of bounds of heap allocated buffers. The [implementation](https://github.com/tensorflow/tensorflow/blob/8d72537c6abf5a44103b57b9c2e22c14f5f49698/tensorflow/core/kernels/ragged_gather_op.cc#L70) directly reads the first dimension of a tensor shape before checking that said tensor has rank of at least 1 (i.e., it is not a scalar). Furthermore, the implementation does not check that the list given by `params_nested_splits` is not an empty list of tensors. We have patched the issue in GitHub commit a2b743f6017d7b97af1fe49087ae15f0ac634373. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions an attacker can read from outside of bounds of heap allocated data by sending specially crafted illegal arguments to `BoostedTreesSparseCalculateBestFeatureSplit`. The [implementation](https://github.com/tensorflow/tensorflow/blob/84d053187cb80d975ef2b9684d4b61981bca0c41/tensorflow/core/kernels/boosted_trees/stats_ops.cc) needs to validate that each value in `stats_summary_indices` is in range. We have patched the issue in GitHub commit e84c975313e8e8e38bb2ea118196369c45c51378. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

An out-of-bounds (OOB) memory read flaw was found in the Qualcomm IPC router protocol in the Linux kernel. A missing sanity check allows a local attacker to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions the implementation of sparse reduction operations in TensorFlow can trigger accesses outside of bounds of heap allocated data. The [implementation](https://github.com/tensorflow/tensorflow/blob/a1bc56203f21a5a4995311825ffaba7a670d7747/tensorflow/core/kernels/sparse_reduce_op.cc#L217-L228) fails to validate that each reduction group does not overflow and that each corresponding index does not point to outside the bounds of the input tensor. We have patched the issue in GitHub commit 87158f43f05f2720a374f3e6d22a7aaa3a33f750. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions an attacker can trigger a crash via a `CHECK`-fail in debug builds of TensorFlow using `tf.raw_ops.ResourceGather` or a read from outside the bounds of heap allocated data in the same API in a release build. The [implementation](https://github.com/tensorflow/tensorflow/blob/f24faa153ad31a4b51578f8181d3aaab77a1ddeb/tensorflow/core/kernels/resource_variable_ops.cc#L660-L668) does not check that the `batch_dims` value that the user supplies is less than the rank of the input tensor. Since the implementation uses several for loops over the dimensions of `tensor`, this results in reading data from outside the bounds of heap allocated buffer backing the tensor. We have patched the issue in GitHub commit bc9c546ce7015c57c2f15c168b3d9201de679a1d. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds read in smb2_sess_setup ksmbd does not consider the case of that smb2 session setup is in compound request. If this is the second payload of the compound, OOB read issue occurs while processing the first payload in the smb2_sess_setup().

Possible buffer overflow due to lack of buffer length check during management frame Rx handling in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile

An out-of-bounds array read in the apr_time_exp*() functions was fixed in the Apache Portable Runtime 1.6.3 release (CVE-2017-12613). The fix for this issue was not carried forward to the APR 1.7.x branch, and hence version 1.7.0 regressed compared to 1.6.3 and is vulnerable to the same issue.

Possible out of bound read due to lack of length check of data length for a DIAG event in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

An out-of-bounds (OOB) memory access flaw was found in fs/f2fs/node.c in the f2fs module in the Linux kernel in versions before 5.12.0-rc4. A bounds check failure allows a local attacker to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability.

An issue was discovered in InsydeH2O. A malicious operating system can tamper with a runtime-writable EFI variable, leading to out-of-bounds memory reads and a denial of service. This is fixed in version 01.01.04.0016.

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

TensorFlow is an open source platform for machine learning. In affected versions the implementation of `SparseFillEmptyRows` can be made to trigger a heap OOB access. This occurs whenever the size of `indices` does not match the size of `values`. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing The hp_populate_*_elements_from_package() functions in the hp-bioscfg driver contain out-of-bounds array access vulnerabilities. These functions parse ACPI packages into internal data structures using a for loop with index variable 'elem' that iterates through enum_obj/integer_obj/order_obj/password_obj/string_obj arrays. When processing multi-element fields like PREREQUISITES and ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array elements using expressions like 'enum_obj[elem + reqs]' and 'enum_obj[elem + pos_values]' within nested loops. The bug is that the bounds check only validated elem, but did not consider the additional offset when accessing elem + reqs or elem + pos_values. The fix changes the bounds check to validate the actual accessed index.

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode The local variable 'i' is initialized with -EINVAL, but the for loop immediately overwrites it and -EINVAL is never returned. If no empty compression mode can be found, the function would return the out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid array access in add_iaa_compression_mode(). Fix both issues by returning either a valid index or -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: avoid invalid read in irdma_net_event irdma_net_event() should not dereference anything from "neigh" (alias "ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE. Other events come with different structures pointed to by "ptr" and they may be smaller than struct neighbour. Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case. The bug is mostly harmless, but it triggers KASAN on debug kernels: BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma] Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554 CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1 Hardware name: [...] Workqueue: events rt6_probe_deferred Call Trace: <IRQ> dump_stack_lvl+0x60/0xb0 print_address_description.constprop.0+0x2c/0x3f0 print_report+0xb4/0x270 kasan_report+0x92/0xc0 irdma_net_event+0x32e/0x3b0 [irdma] notifier_call_chain+0x9e/0x180 atomic_notifier_call_chain+0x5c/0x110 rt6_do_redirect+0xb91/0x1080 tcp_v6_err+0xe9b/0x13e0 icmpv6_notify+0x2b2/0x630 ndisc_redirect_rcv+0x328/0x530 icmpv6_rcv+0xc16/0x1360 ip6_protocol_deliver_rcu+0xb84/0x12e0 ip6_input_finish+0x117/0x240 ip6_input+0xc4/0x370 ipv6_rcv+0x420/0x7d0 __netif_receive_skb_one_core+0x118/0x1b0 process_backlog+0xd1/0x5d0 __napi_poll.constprop.0+0xa3/0x440 net_rx_action+0x78a/0xba0 handle_softirqs+0x2d4/0x9c0 do_softirq+0xad/0xe0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status() It's possible for cp_read() and hdmi_read() to return -EIO. Those values are further used as indexes for accessing arrays. Fix that by checking return values where it's needed. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: libceph: make decode_pool() more resilient against corrupted osdmaps If the osdmap is (maliciously) corrupted such that the encoded length of ceph_pg_pool envelope is less than what is expected for a particular encoding version, out-of-bounds reads may ensue because the only bounds check that is there is based on that length value. This patch adds explicit bounds checks for each field that is decoded or skipped.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: add VLAN id validation before using Currently, the VLAN id may be used without validation when receive a VLAN configuration mailbox from VF. The length of vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause out-of-bounds memory access once the VLAN id is bigger than or equal to VLAN_N_VID. Therefore, VLAN id needs to be checked to ensure it is within the range of VLAN_N_VID.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.4. A local user may be able to cause unexpected system termination or read kernel memory.

In the Linux kernel, the following vulnerability has been resolved: net_sched: keep alloc_hash updated after hash allocation In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash().

Information disclosure due to buffer over read in kernel in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Mobile