A heap-based out-of-bounds read vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet.

A flaw was found in gdk-pixbuf. When parsing a specially crafted ICO file with pixel values that exceed the defined palette range, an out-of-bounds read can occur due to improper bounds checking against the actual palette size. This vulnerability causes heap bytes to be interpreted as valid palette indices and rendered as RGB pixel values in the output image, allowing an attacker to extract heap content via the generated output, such as a thumbnail.

An out-of-bounds read vulnerability exists in dnsmasq's find_soa() function in src/rfc1035.c. When parsing NS section records, extract_name() is called with extrabytes=0, failing to validate that 10 additional bytes exist for fixed-length DNS record fields. A remote attacker controlling a DNS zone can exploit this via a crafted NXDOMAIN response to cause a 10-byte heap out-of-bounds read, potentially accessing stale data from prior transactions.

A flaw was found in moodle where the description user field was not hidden when being set as a hidden user field.

When binding against a DN during authentication, the reply from 389-ds-base will be different whether the DN exists or not. This can be used by an unauthenticated attacker to check the existence of an entry in the LDAP database.

Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

A flaw was found in the OpenShift Mirror Registry. This vulnerability allows an unauthenticated, remote attacker to enumerate valid usernames and email addresses via different error messages during authentication failures and account creation.

A path traversal vulnerability was found in Undertow. This issue may allow a remote attacker to append a specially-crafted sequence to an HTTP request for an application deployed to JBoss EAP, which may permit access to privileged or restricted files and directories.

A flaw was found in Ansible Tower, versions 3.6.x before 3.6.2 and 3.5.x before 3.5.4, when /websocket is requested and the password contains the '#' character. This request would cause a socket error in RabbitMQ when parsing the password and an HTTP error code 500 and partial password disclose will occur in plaintext. An attacker could easily guess some predictable passwords or brute force the password.

A vulnerability was found in Quay, which allows successful authentication even when a truncated password version is provided. This flaw affects the authentication mechanism, reducing the overall security of password enforcement.  While the risk is relatively low due to the typical length of the passwords used (73 characters), this vulnerability can still be exploited to reduce the complexity of brute-force or password-guessing attacks. The truncation of passwords weakens the overall authentication process, thereby reducing the effectiveness of password policies and potentially increasing the risk of unauthorized access in the future.

A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.

A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.

A flaw was found in Keycloak. A remote, unauthenticated attacker can exploit this vulnerability by sending specially crafted SOAP requests to the SAML ECP (Security Assertion Markup Language Enhanced Client or Proxy) endpoint with varying client IDs. By observing distinct faultstrings in the responses, the attacker can determine the client's protocol type, leading to information disclosure.

Other issue in the JavaScript Engine component. This vulnerability was fixed in Firefox 150.0.3, Firefox ESR 115.36, Firefox ESR 140.11, and Thunderbird 140.11.

IBM Resilient SOAR 40 and earlier could disclose sensitive information by allowing a user to enumerate usernames.

When a SecurityManager is configured, a web application's ability to read system properties should be controlled by the SecurityManager. In Apache Tomcat 9.0.0.M1 to 9.0.0.M9, 8.5.0 to 8.5.4, 8.0.0.RC1 to 8.0.36, 7.0.0 to 7.0.70, 6.0.0 to 6.0.45 the system property replacement feature for configuration files could be used by a malicious web application to bypass the SecurityManager and read system properties that should not be visible.

A flaw was found in RESTEasy client in all versions of RESTEasy up to 4.5.6.Final. It may allow client users to obtain the server's potentially sensitive information when the server got WebApplicationException from the RESTEasy client call. The highest threat from this vulnerability is to data confidentiality.

A flaw was found in JBoss Enterprise Application Platform. When role-based authorization is used for Enterprise Java Beans (EJB) access, the system does not correctly call the necessary authorization modules. This prevents Java Authorization Contract for Containers (JACC) permissions from being applied, allowing remote attackers to gain unauthorized access to EJBs.

An information leak vulnerability was found in Undertow. If all headers are not written out in the first write() call then the code that handles flushing the buffer will always write out the full contents of the writevBuffer buffer, which may contain data from previous requests.

This is a concurrency issue that can result in the wrong caller principal being returned from the session context of an EJB that is configured with a RunAs principal. In particular, the org.jboss.as.ejb3.component.EJBComponent class has an incomingRunAsIdentity field. This field is used by the org.jboss.as.ejb3.security.RunAsPrincipalInterceptor to keep track of the current identity prior to switching to a new identity created using the RunAs principal. The exploit consist that the EJBComponent#incomingRunAsIdentity field is currently just a SecurityIdentity. This means in a concurrent environment, where multiple users are repeatedly invoking an EJB that is configured with a RunAs principal, it's possible for the wrong the caller principal to be returned from EJBComponent#getCallerPrincipal. Similarly, it's also possible for EJBComponent#isCallerInRole to return the wrong value. Both of these methods rely on incomingRunAsIdentity. Affects all versions of JBoss EAP from 7.1.0 and all versions of WildFly 11+ when Elytron is enabled.

Spring Security (Spring Security 4.1.x before 4.1.5, 4.2.x before 4.2.4, and 5.0.x before 5.0.1; and Spring Framework 4.3.x before 4.3.14 and 5.0.x before 5.0.3) does not consider URL path parameters when processing security constraints. By adding a URL path parameter with special encodings, an attacker may be able to bypass a security constraint. The root cause of this issue is a lack of clarity regarding the handling of path parameters in the Servlet Specification. Some Servlet containers include path parameters in the value returned for getPathInfo() and some do not. Spring Security uses the value returned by getPathInfo() as part of the process of mapping requests to security constraints. In this particular attack, different character encodings used in path parameters allows secured Spring MVC static resource URLs to be bypassed.

The web console login form in ovirt-engine before version 4.2.3 returned different errors for non-existent users and invalid passwords, allowing an attacker to discover the names of valid user accounts.

A vulnerability was found in 3Scale. There is no auth mechanism to see a PDF invoice of a Developer user if the URL is known. Anyone can see the invoice if the URL is known or guessed.

A flaw was found in Event-Driven Automation (EDA) in Ansible Automation Platform (AAP), which lacks encryption of sensitive information. An attacker with network access could exploit this vulnerability by sniffing the plaintext data transmitted between the EDA and AAP. An attacker with system access could exploit this vulnerability by reading the plaintext data stored in EDA and AAP databases.

A flaw was found in OpenShift Console. A Server Side Request Forgery (SSRF) attack can happen if an attacker supplies all or part of a URL to the server to query. The server is considered to be in a privileged network position and can often reach exposed services that aren't readily available to clients due to network filtering. Leveraging such an attack vector, the attacker can have an impact on other services and potentially disclose information or have other nefarious effects on the system. The /api/dev-console/proxy/internet endpoint on the OpenShift Console allows authenticated users to have the console's pod perform arbitrary and fully controlled HTTP(s) requests. The full response to these requests is returned by the endpoint. While the name of this endpoint suggests the requests are only bound to the internet, no such checks are in place. An authenticated user can therefore ask the console to perform arbitrary HTTP requests from outside the cluster to a service inside the cluster.

A flaw was found in the OpenShift console. Several endpoints in the application use the authHandler() and authHandlerWithUser() middleware functions. When the default authentication provider ("openShiftAuth") is set, these functions do not perform any authentication checks, relying instead on the targeted service to handle authentication and authorization. This issue leads to various degrees of data exposure due to a lack of proper credential verification.

A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation.

In mutt and neomutt, PGP encryption does not use the --hidden-recipient mode which may leak the Bcc email header field by inferring from the recipients info.

A flaw was found in RESTEasy in all versions of RESTEasy up to 4.6.0.Final. The endpoint class and method names are returned as part of the exception response when RESTEasy cannot convert one of the request URI path or query values to the matching JAX-RS resource method's parameter value. The highest threat from this vulnerability is to data confidentiality.

It has been discovered in redhat-certification that any unauthorized user may download any file under /var/www/rhcert, provided they know its name. Red Hat Certification 6 and 7 is vulnerable to this issue.

Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2.

When using the gdImageCreateFromXbm() function in the GD Graphics Library (aka LibGD) 2.2.5, as used in the PHP GD extension in PHP versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6, it is possible to supply data that will cause the function to use the value of uninitialized variable. This may lead to disclosing contents of the stack that has been left there by previous code.

A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`.

IBM Robotic Process Automation 21.0.0 through 21.0.7.1 runtime is vulnerable to information disclosure of script content if the remote REST request computer policy is enabled. IBM X-Force ID: 263470.

OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.

A path disclosure vulnerability was found in Samba. As part of the Spotlight protocol, Samba discloses the server-side absolute path of shares, files, and directories in the results for search queries. This flaw allows a malicious client or an attacker with a targeted RPC request to view the information that is part of the disclosed path.

IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.4 and 23.0.0 through 23.0.5 is vulnerable to disclosing server version information which may be used to determine software vulnerabilities at the operating system level. IBM X-Force ID: 259368.

The Birthday attack against 64-bit block ciphers flaw (CVE-2016-2183) was reported for the health checks port (9979) on etcd grpc-proxy component. Even though the CVE-2016-2183 has been fixed in the etcd components, to enable periodic health checks from kubelet, it was necessary to open up a new port (9979) on etcd grpc-proxy, hence this port might be considered as still vulnerable to the same type of vulnerability. The health checks on etcd grpc-proxy do not contain sensitive data (only metrics data), therefore the potential impact related to this vulnerability is minimal. The CVE-2023-0296 has been assigned to this issue to track the permanent fix in the etcd component.

IBM Robotic Process Automation 20.12 through 21.0.6 is vulnerable to exposure of the name and email for the creator/modifier of platform level objects. IBM X-Force ID: 238678.

A flaw was found in the authentication enforcement mechanism of a model inference API in ai-inference-server. All /v1/* endpoints are expected to enforce API key validation. However, the POST /invocations endpoint failed to do so, resulting in an authentication bypass. This vulnerability allows unauthorized users to access the same inference features available on protected endpoints, potentially exposing sensitive functionality or allowing unintended access to backend resources.

A flaw was found in libwebp in versions before 1.0.1. An out-of-bounds read was found in function ChunkVerifyAndAssign. The highest threat from this vulnerability is to data confidentiality and to the service availability.

The tt_face_load_hdmx function in truetype/ttpload.c in FreeType before 2.5.4 does not establish a minimum record size, which allows remote attackers to cause a denial of service (out-of-bounds read) or possibly have unspecified other impact via a crafted TrueType font.

Multiple integer overflows in sfnt/ttcmap.c in FreeType before 2.5.4 allow remote attackers to cause a denial of service (out-of-bounds read or memory corruption) or possibly have unspecified other impact via a crafted cmap SFNT table.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds read may lead to denial of service, information disclosure, or data tampering.

An out-of-bounds memory read flaw was found in the Linux kernel's BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.

MIT Kerberos 5 (aka krb5) before 1.12.2 allows remote attackers to cause a denial of service (buffer over-read and application crash) by injecting invalid tokens into a GSSAPI application session.

Shim allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted DHCPv6 packet.

The DECnet parser in tcpdump before 4.9.2 has a buffer over-read in print-decnet.c:decnet_print().

The libxul.so!gfxContext::Polygon function in Mozilla Firefox before 28.0, Firefox ESR 24.x before 24.4, Thunderbird before 24.4, and SeaMonkey before 2.25 allows remote attackers to obtain sensitive information from process memory, cause a denial of service (out-of-bounds read and application crash), or possibly bypass the Same Origin Policy via vectors involving MathML polygon rendering.