Tenda AC15 and AC18 routers V15.03.05.19 contain stack overflow vulnerabilities in the function setSmartPowerManagement with the request /goform/PowerSaveSet
In Tenda ax1803 v1.0.0.1, the http requests handled by the fromAdvSetMacMtuWan functions, wanSpeed, cloneType, mac, can cause a stack overflow and enable remote code execution (RCE).
In rw_t2t_handle_tlv_detect_rsp of rw_t2t_ndef.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution over NFC with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-147309942
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In 1.3.3 and earlier, a heap buffer overflow vulnerability persists in the Crypto_TC_ApplySecurity function due to an incomplete validation check on the fl (frame length) field. Although CVE-2025-29912 addressed an underflow issue involving fl, the patch fails to fully prevent unsafe calculations. As a result, an attacker can still craft malicious frames that cause a negative tf_payload_len, which is then interpreted as a large unsigned value, leading to a heap buffer overflow in a memcpy call.
In p2p_process_prov_disc_req of p2p_pd.c, there is a possible out of bounds read and write due to a use after free. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-8.1 Android-9 Android-10Android ID: A-181660448
In NfcTag::discoverTechnologies (activation) of NfcTag.cpp, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote escalation of privilege with no additionalSystem execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12Android ID: A-189942532
The VMware vCenter Server contains a memory corruption vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger a memory corruption vulnerability which may bypass authentication.
Tenda AC6 v15.03.05.16 was discovered to contain a buffer overflow via the formWifiWpsOOB function.
Tenda AC6 v15.03.05.16 was discovered to contain a buffer overflow via the formSetSpeedWan function.
In GetTimeStampAndPkt of DumpstateDevice.cpp, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-179620905 References: N/A
In Builtins::Generate_ArgumentsAdaptorTrampoline of builtins-arm.cc and related files, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.1 Android-9 Android-10 Android-11Android ID: A-160610106
An issue was discovered in pdfcrack 0.17 thru 0.18, allows attackers to execute arbitrary code via a stack overflow in the MD5 function.
Multiple stack-based buffer overflows in the __dn_expand function in network/dn_expand.c in musl libc 1.1x before 1.1.2 and 0.9.13 through 1.0.3 allow remote attackers to (1) have unspecified impact via an invalid name length in a DNS response or (2) cause a denial of service (crash) via an invalid name length in a DNS response, related to an infinite loop with no output.
spimsimulator spim v9.1.24 and before is vulnerable to Buffer Overflow in READ_STRING_SYSCALL.
A stack overflow in WhatsApp for Android prior to v2.20.196.16, WhatsApp Business for Android prior to v2.20.196.12, WhatsApp for iOS prior to v2.20.90, WhatsApp Business for iOS prior to v2.20.90, and WhatsApp for Portal prior to v173.0.0.29.505 could have allowed arbitrary code execution when parsing the contents of an RTP Extension header.
Tenda AC6 v15.03.05.16 was discovered to contain a buffer overflow via the fromAddressNat function.
xbuf_format_converter, used as part of exif_read_data, was appending a terminating null character to the generated string, but was not using its standard append char function. As a result, if the buffer was full, it would result in an out-of-bounds write. This issue affects HHVM versions prior to 4.56.3, all versions between 4.57.0 and 4.80.1, all versions between 4.81.0 and 4.93.1, and versions 4.94.0, 4.95.0, 4.96.0, 4.97.0, 4.98.0.
Tenda AC8 v4 US_AC8V4.0si_V16.03.34.06_cn was discovered to contain a stack overflow via parameter firewallEn at /goform/SetFirewallCfg.
An issue was discovered in uIP 1.0, as used in Contiki 3.0 and other products. The code that reassembles fragmented packets fails to properly validate the total length of an incoming packet specified in its IP header, as well as the fragmentation offset value specified in the IP header. By crafting a packet with specific values of the IP header length and the fragmentation offset, attackers can write into the .bss section of the program (past the statically allocated buffer that is used for storing the fragmented data) and cause a denial of service in uip_reass() in uip.c, or possibly execute arbitrary code on some target architectures.
LZ4 bindings use a deprecated C API that is vulnerable to memory corruption, which could lead to arbitrary code execution if called with untrusted user input.
Buffer overflow in mDNS NSEC record registering process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Buffer overflow in IPP number-up attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Nanopb before 0.3.1 allows size_t overflows in pb_dec_bytes and pb_dec_string.
An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.
A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.
A vulnerability, which was classified as critical, was found in D-Link DAP-1620 1.03. This affects the function check_dws_cookie of the file /storage of the component Cookie Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
In Factory::CreateStrictFunctionMap of factory.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-167389063
Mozilla developers and community members reported memory safety bugs present in Firefox 81 and Firefox ESR 78.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.4, Firefox < 82, and Thunderbird < 78.4.
A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All versions < V5.2.5), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.0). The webserver of the affected devices contains a vulnerability that may lead to a heap overflow condition. An attacker could cause this condition on the webserver by sending specially crafted requests. This could stop the webserver temporarily.
Certain HP LaserJet Pro, HP LaserJet Enterprise, and HP LaserJet Managed Printers may potentially be vulnerable to Remote Code Execution and Elevation of Privilege when processing a PostScript print job.
A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
mruby through 2.1.2-rc has a heap-based buffer overflow in the mrb_yield_with_class function in vm.c because of incorrect VM stack handling. It can be triggered via the stack_copy function.
OpenConnect VPN client with GnuTLS before 5.02 contains a heap overflow if MTU is increased on reconnection.
In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.
In avrc_pars_vendor_cmd of avrc_pars_tg.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution over Bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-11, Android-8.0, Android-8.1, Android-9, Android-10; Android ID: A-168802990.
Dell Chassis Management Controller Firmware for Dell PowerEdge FX2, version(s) prior to 2.40.200.202101130302, and Dell Chassis Management Controller Firmware for Dell PowerEdge VRTX version(s) prior to 3.41.200.202209300499, contain(s) a Stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.
D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetDynamicDNSSettings module.
An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.
Out-of-bounds write in the PCX image codec in QNX SDP versions 8.0, 7.1 and 7.0 could allow an unauthenticated attacker to cause a denial-of-service condition or execute code in the context of the process using the image codec.
NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability in the Python backend, where an attacker could cause an out-of-bounds write by sending a request. A successful exploit of this vulnerability might lead to remote code execution, denial of service, data tampering, or information disclosure.
Malicious operation of the crafted web browser cookie may cause a stack-based buffer overflow in the system web server on the EDR-G902 and EDR-G903 Series Routers (versions prior to 5.4).
Delta Electronics ISPSoft version 3.20 is vulnerable to a Stack-Based buffer overflow vulnerability that could allow an attacker to execute arbitrary code when parsing DVP file.
A memory corruption vulnerability is present in bspatch as shipped in Colin Percival’s bsdiff tools version 4.3. Insufficient checks when handling external inputs allows an attacker to bypass the sanity checks in place and write out of a dynamically allocated buffer boundaries.
An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_sdp_merge in sdp.c has a stack-based buffer overflow.
A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L 9.3.5u.6146_B20201023. Affected is the function setDefResponse of the file /www/cgi-bin/cstecgi.cgi. The manipulation of the argument IpAddress leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Xjp2.dll in XnView before 2.13 allows remote attackers to execute arbitrary code via (1) the Csiz parameter in a SIZ marker, which triggers an incorrect memory allocation, or (2) the lqcd field in a QCD marker in a crafted JPEG2000 file, which leads to a heap-based buffer overflow.
Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the time parameter in the get_parentControl_list_Info function.
U.S. Air Force Sensor Data Management System extract75 has a buffer overflow that leads to code execution. An overflow in a global variable (sBuffer) leads to a Write-What-Where outcome. Writing beyond sBuffer will clobber most global variables until reaching a pointer such as DES_info or image_info. By controlling that pointer, one achieves an arbitrary write when its fields are assigned. The data written is from a potentially untrusted NITF file in the form of an integer. The attacker can gain control of the instruction pointer.
Morita Shogi 64 through 2020-05-02 for Nintendo 64 devices allows remote attackers to execute arbitrary code via crafted packet data to the built-in modem because 0x800b3e94 (aka the IF subcommand to top-level command 7) has a stack-based buffer overflow.
WebAccess Node Version 8.4.4 and prior is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.