Dell PowerScale InsightIQ, versions 5.0 through 5.2, contains an improper privilege management vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to elevation of privileges.

An issue was discovered in Xen through 4.12.x allowing 32-bit PV guest OS users to gain guest OS privileges by installing and using descriptors. There is missing descriptor table limit checking in x86 PV emulation. When emulating certain PV guest operations, descriptor table accesses are performed by the emulating code. Such accesses should respect the guest specified limits, unless otherwise guaranteed to fail in such a case. Without this, emulation of 32-bit guest user mode calls through call gates would allow guest user mode to install and then use descriptors of their choice, as long as the guest kernel did not itself install an LDT. (Most OSes don't install any LDT by default). 32-bit PV guest user mode can elevate its privileges to that of the guest kernel. Xen versions from at least 3.2 onwards are affected. Only 32-bit PV guest user mode can leverage this vulnerability. HVM, PVH, as well as 64-bit PV guests cannot leverage this vulnerability. Arm systems are unaffected.

In K7 Antivirus Premium 16.0.xxx through 16.0.0120; K7 Total Security 16.0.xxx through 16.0.0120; and K7 Ultimate Security 16.0.xxx through 16.0.0120, the module K7TSHlpr.dll improperly validates the administrative privileges of the user, allowing arbitrary registry writes in the K7AVOptn.dll module to facilitate escalation of privileges via inter-process communication with a service process.

An issue in D-Link DIR-1253 MESH V1.6.1684 allows an attacker to escalate privileges via the etc/shadow.sample component

systemd v233 and earlier fails to safely parse usernames starting with a numeric digit (e.g. "0day"), running the service in question with root privileges rather than the user intended.

Some smartphones have configuration issues. Successful exploitation of this vulnerability may cause kernel privilege escalation, which results in system service exceptions.

A piece of Huawei whole-home intelligence software has an Incorrect Privilege Assignment vulnerability. Successful exploitation of this vulnerability could allow attackers to access restricted functions.

A piece of Huawei whole-home intelligence software has an Incorrect Privilege Assignment vulnerability. Successful exploitation of this vulnerability could allow attackers to access restricted functions.

A vulnerability classified as critical has been found in Shenzhen Youkate Industrial Facial Love Cloud Payment System up to 1.0.55.0.0.1. This affects an unknown part of the file /SystemMng.ashx of the component Account Handler. The manipulation of the argument operatorRole with the input 00 leads to improper privilege management. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-245061 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Woffice CRM theme for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.4.21. This is due to a misconfiguration of excluded roles during registration. This makes it possible for unauthenticated attackers to register with an Administrator role if a custom login form is being used. This can be combined with CVE-2025-2797 to bypass the user approval process if an Administrator can be tricked into taking an action such as clicking a link.

Some smartphones have configuration issues. Successful exploitation of this vulnerability may cause privilege escalation, which results in system service exceptions.

h3c firewall <= 3.10 ESS6703 has a privilege bypass vulnerability.

Dell PowerScale OneFS 9.0.0.x - 9.4.0.x, contains an Improper Handling of Insufficient Privileges vulnerability in NFS. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to information disclosure and remote execution.

An issue in Coresmartcontracts Uniswap v.3.0 and fixed in v.4.0 allows a remote attacker to escalate privileges via the _modifyPosition function

An authentication bypass vulnerability in CA Privileged Access Manager 2.8.2 and earlier allows remote attackers to execute arbitrary commands with specially crafted requests.

Unauth. Privilege Escalation vulnerability in ARMember premium plugin <= 5.5.1 on WordPress.

Improper Privilege Management in GitHub repository ikus060/rdiffweb prior to 2.5.2.

Dolibarr Open Source ERP & CRM for Business before v14.0.1 allows attackers to escalate privileges via a crafted API.

The Login as User or Customer WordPress plugin before 3.3 lacks authorization checks to ensure that users are allowed to log in as another one, which could allow unauthenticated attackers to obtain a valid admin session.

Grails Spring Security Core plugin is vulnerable to privilege escalation. The vulnerability allows an attacker access to one endpoint (i.e. the targeted endpoint) using the authorization requirements of a different endpoint (i.e. the donor endpoint). In some Grails framework applications, access to the targeted endpoint will be granted based on meeting the authorization requirements of the donor endpoint, which can result in a privilege escalation attack. This vulnerability has been patched in grails-spring-security-core versions 3.3.2, 4.0.5 and 5.1.1. Impacted Applications: Grails Spring Security Core plugin versions: 1.x 2.x >=3.0.0 <3.3.2 >=4.0.0 <4.0.5 >=5.0.0 <5.1.1 We strongly suggest that all Grails framework applications using the Grails Spring Security Core plugin be updated to a patched release of the plugin. Workarounds: Users should create a subclass extending one of the following classes from the `grails.plugin.springsecurity.web.access.intercept` package, depending on their security configuration: * `AnnotationFilterInvocationDefinition` * `InterceptUrlMapFilterInvocationDefinition` * `RequestmapFilterInvocationDefinition` In each case, the subclass should override the `calculateUri` method like so: ``` @Override protected String calculateUri(HttpServletRequest request) { UrlPathHelper.defaultInstance.getRequestUri(request) } ``` This should be considered a temporary measure, as the patched versions of grails-spring-security-core deprecates the `calculateUri` method. Once upgraded to a patched version of the plugin, this workaround is no longer needed. The workaround is especially important for version 2.x, as no patch is available version 2.x of the GSSC plugin.

Improper Privilege Management vulnerability in IOSS WP MLM Unilevel allows Privilege Escalation.This issue affects WP MLM Unilevel: from n/a through 4.0.

The location module has a vulnerability of bypassing permission verification.Successful exploitation of this vulnerability may cause privilege escalation.

An authentication bypass vulnerability in CA Privileged Access Manager 2.8.2 and earlier allows remote attackers to execute arbitrary code or commands by poisoning a configuration file.

Improper privilege management vulnerability in API Key used in SmartThings prior to 1.7.73.22 allows an attacker to abuse the API key without limitation.

An issue discovered in TheGreenBow Windows Enterprise Certified VPN Client 6.52, Windows Standard VPN Client 6.87, and Windows Enterprise VPN Client 6.87 allows attackers to gain escalated privileges via crafted changes to memory mapped file.

The Barcode Scanner (+Mobile App) – Inventory manager, Order fulfillment system, POS (Point of Sale) plugin for WordPress is vulnerable to privilege escalation via insecure token-based authentication in all versions up to, and including, 1.11.0. This is due to the plugin trusting a user-supplied Base64-encoded user ID in the token parameter to identify users, leaking valid authentication tokens through the 'barcodeScannerConfigs' action, and lacking meta-key restrictions on the 'setUserMeta' action. This makes it possible for unauthenticated attackers to escalate their privileges to that of an administrator by first spoofing the admin user ID to leak their authentication token, then using that token to update any user's 'wp_capabilities' meta to gain full administrative access.

A CWE-269: Improper Privilege Management vulnerability exists that could cause an arbitrary command execution when the software is configured with specially crafted event actions. Affected Product: ConneXium Network Manager Software (All Versions)

Vulnerability of permissions not being strictly verified in the window management module.Successful exploitation of this vulnerability may cause features to perform abnormally.

The Realteo - Real Estate Plugin by Purethemes plugin for WordPress, used by the Findeo Theme, is vulnerable to authentication bypass in all versions up to, and including, 1.2.8. This is due to insufficient role restrictions in the 'do_register_user' function. This makes it possible for unauthenticated attackers to register an account with the Administrator role.

The SystemUI module has a privilege escalation vulnerability. Successful exploitation of this vulnerability can cause malicious applications to pop up windows or run in the background.

An issue in Adtran 411 ONT vL80.00.0011.M2 allows attackers to escalate privileges via unspecified vectors.

A vulnerability in the SonicWall Email Security version 10.0.9.x allows an attacker to create an administrative account by sending a crafted HTTP request to the remote host.

Privilege chaining vulnerability in acmailer ver. 4.0.2 and earlier, and acmailer DB ver. 1.1.4 and earlier allows remote attackers to bypass authentication and to gain an administrative privilege which may result in obtaining the sensitive information on the server via unspecified vectors.

Windows Update Stack Elevation of Privilege Vulnerability

Insecure Permissions vulnerability in JLINK Unionman Technology Co. Ltd Jlink AX1800 v.1.0 allows a remote attacker to escalate privileges via a crafted command.

An issue was discovered in IceCMS version 2.0.1, allows attackers to escalate privileges and gain sensitive information via UserID parameter in api/User/ChangeUser.

The Advanced Custom Fields: Extended plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 0.9.2.1. This is due to the 'insert_user' function not restricting the roles with which a user can register. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site. Note: The vulnerability can only be exploited if 'role' is mapped to the custom field.

Adobe Creative Cloud Desktop Application versions 5.1 and earlier have a lack of exploit mitigations vulnerability. Successful exploitation could lead to privilege escalation.

Microsoft Office Elevation of Privilege Vulnerability

The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.28.29. This is due to insufficient validation of user-supplied role values in the 'validate_value', 'pre_update_value', and 'get_fields_display' functions. This makes it possible for unauthenticated attackers to register as administrators and gain complete control of the site, granted they can access a user registration form containing a Role field.

The Swape theme before 1.2.1 for WordPress has incorrect access control, as demonstrated by allowing new administrator accounts via vectors involving xmlPath to wp-admin/admin-ajax.php.

The User Profile Builder WordPress plugin before 3.15.2 does not have a proper password reset process, allowing a few unauthenticated requests to reset the password of any user by knowing their username, such as administrator ones, and therefore gain access to their account

The JAY Login & Register plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.6.03. This is due to the plugin allowing a user to update arbitrary user meta through the 'jay_login_register_ajax_create_final_user' function. This makes it possible for unauthenticated attackers to elevate their privileges to that of an administrator.

The Ultimate Member WordPress plugin before 2.6.7 does not prevent visitors from creating user accounts with arbitrary capabilities, effectively allowing attackers to create administrator accounts at will. This is actively being exploited in the wild.

The EduKart Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.0.3. This is due to the 'edukart_pro_register_user_front_end' function not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site.

The Flex Store Users plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.1.0. This is due to the 'fsUserHandle::signup' and the 'fsSellerRole::add_role_seller' functions not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site. Note: The vulnerability can be exploited with the 'fs_type' parameter if the Flex Store Seller plugin is also activated.

The Lizza LMS Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.0.3. This is due to the 'lizza_lms_pro_register_user_front_end' function not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site.

The Tiger theme for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 101.2.1. This is due to the 'paypal-submit.php' file not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site.

The WP CarDealer plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.2.16. This is due to the 'WP_CarDealer_User::process_register' function not restricting what user roles a user can register with. This makes it possible for unauthenticated attackers to supply the 'administrator' role during registration and gain administrator access to the site.