In the Linux kernel, the following vulnerability has been resolved: xfrm: state: fix out-of-bounds read during lookup lookup and resize can run in parallel. The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array. rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask; While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) { This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again). Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent. The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side. xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.

In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future.

An issue was discovered in the Linux kernel through 5.11.3. drivers/scsi/scsi_transport_iscsi.c is adversely affected by the ability of an unprivileged user to craft Netlink messages.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix array bounds error with may_goto may_goto uses an additional 8 bytes on the stack, which causes the interpreters[] array to go out of bounds when calculating index by stack_size. 1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT cases, reject loading directly. 2. For non-JIT cases, calculating interpreters[idx] may still cause out-of-bounds array access, and just warn about it. 3. For jit_requested cases, the execution of bpf_func also needs to be warned. So move the definition of function __bpf_prog_ret0_warn out of the macro definition CONFIG_BPF_JIT_ALWAYS_ON.

Lack of boundary checking of a buffer in libSPenBase library of Samsung Notes prior to Samsung Note version 4.3.02.61 allows OOB read.

Lack of boundary checking of a buffer in libSPenBase library of Samsung Notes prior to Samsung Note version 4.3.02.61 allows OOB read

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate l_tree_depth to avoid out-of-bounds access The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is limited to OCFS2_MAX_PATH_DEPTH. Add a check to prevent out-of-bounds access if l_tree_depth has an invalid value, which may occur when reading from a corrupted mounted disk [1].

A component of the HarmonyOS has a Improper Input Validation vulnerability. Local attackers may exploit this vulnerability to cause nearby process crash.

Out of bounds read in firmware for some Intel(R) Wireless Bluetooth(R) and Killer(TM) Bluetooth(R) products before version 22.120 may allow a privileged user to potentially enable information disclosure via local access.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time". The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different. Both are required to eliminate the shift-out-of-bounds issues at mount time. This patch (of 2): If the block size exponent information written in an on-disk superblock is corrupted, nilfs_sb2_bad_offset helper function can trigger shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38983 is too large for 64-bit type 'unsigned long long' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322 nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline] nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523 init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577 nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047 nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317 ... In addition, since nilfs_sb2_bad_offset() performs multiplication without considering the upper bound, the computation may overflow if the disk layout parameters are not normal. This fixes these issues by inserting preliminary sanity checks for those parameters and by converting the comparison from one involving multiplication and left bit-shifting to one using division and right bit-shifting.

A component of the HarmonyOS has a Out-of-bounds Read vulnerability. Local attackers may exploit this vulnerability to cause system Soft Restart.

A component of the HarmonyOS has a Out-of-bounds Read vulnerability. Local attackers may exploit this vulnerability to cause kernel out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bound read in smb2_write ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If ->NextCommand is bigger than Offset + Length of smb2 write, It will allow oversized smb2 write length. It will cause OOB read in smb2_write.

There is an out of bounds read vulnerability in eSE620X vESS V100R001C10SPC200, V100R001C20SPC200, V200R001C00SPC300. A local attacker can exploit this vulnerability by sending specific message to the target device. Due to insufficient validation of internal message, successful exploit may cause the process and the service abnormal.

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix out-of-range access of vnic_info array The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics].

There is an out-of-bound read vulnerability in Taurus-AL00A 10.0.0.1(C00E1R1P1). A module does not verify the some input. Attackers can exploit this vulnerability by sending malicious input through specific app. This could cause out-of-bound, compromising normal service.

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

In the Linux kernel, the following vulnerability has been resolved: netlabel: fix out-of-bounds memory accesses There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8.

In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: add bounds checks to host bulk flow fairness counts Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow's quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it's not worth complicating the code to preserve the old behaviour.

Possible buffer over read due to lack of data length check in QVR Service configuration in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Wearables

Out-of-bounds read in the allocation of image buffer in Samsung Notes prior to version 4.4.30.63 allows local attackers to access out-of-bounds memory.

Out-of-bounds read in the parsing of image data in Samsung Notes prior to version 4.4.30.63 allows local attackers to access out-of-bounds memory.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints() Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from hid-thrustmaster driver. This array is passed to usb_check_int_endpoints function from usb.c core driver, which executes a for loop that iterates over the elements of the passed array. Not finding a null element at the end of the array, it tries to read the next, non-existent element, crashing the kernel. To fix this, a 0 element was added at the end of the array to break the for loop. [1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad

In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning.

Possible out of bounds read due to incorrect validation of incoming buffer length in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile

In the Linux kernel, the following vulnerability has been resolved: orangefs: fix a oob in orangefs_debug_write I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch.

A vulnerability was determined in Squirrel up to 3.2. Affected by this vulnerability is the function SQFuncState::PopTarget of the file src/squirrel/squirrel/sqfuncstate.cpp. Executing a manipulation of the argument _target_stack can lead to out-of-bounds read. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in niklasso minisat up to 2.2.0. This issue affects the function Solver::value in the library core/SolverTypes.h of the component DIMACS File Parser. This manipulation of the argument variable index with the input 2147483648 causes out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer over-read vulnerability occurs when processing an image with small dimension using the `-wavelet-denoise` operator. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

A vulnerability was identified in janet-lang janet up to 1.40.1. Affected by this vulnerability is the function janetc_varset of the file src/core/specials.c of the component handleattr Handler. The manipulation leads to out-of-bounds read. The attack can only be performed from a local environment. The exploit is publicly available and might be used. Upgrading to version 1.41.0 addresses this issue. The identifier of the patch is 2fabc80151a2b8834ee59cda8a70453f848b40e5. The affected component should be upgraded.

A weakness has been identified in FascinatedBox lily up to 2.3. This vulnerability affects the function count_transforms of the file src/lily_emitter.c. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was detected in CCExtractor up to 0.96.5. Affected is the function processmp4 in the library src/lib_ccx/mp4.c. Performing a manipulation results in use after free. The attack is only possible with local access. The exploit is now public and may be used. Upgrading to version 0.96.6 is able to address this issue. The patch is named fd7271bae238ccb3ae8a71304ea64f0886324925. You should upgrade the affected component.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

A vulnerability was identified in FascinatedBox lily up to 2.3. Affected by this issue is the function shorthash_for_name of the file src/lily_symtab.c. The manipulation leads to use after free. Local access is required to approach this attack. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.6, Security Update 2020-004 Mojave, Security Update 2020-004 High Sierra. A local user may be able to cause unexpected system termination or read kernel memory.

Out-of-bounds read issue in the media subsystem. Impact: Successful exploitation of this vulnerability will affect availability and confidentiality.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sq kvzalloc_node is not doing a runtime check on the node argument (__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES triggers OOB access and panic (see the trace below). Add missing cpu_to_node call to convert cpu id to node id. [ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up [ 166.479327] BUG: unable to handle page fault for address: 0000000800000010 [ 166.494592] #PF: supervisor read access in kernel mode [ 166.505995] #PF: error_code(0x0000) - not-present page ... [ 166.816958] Call Trace: [ 166.822380] <TASK> [ 166.827034] ? __die_body+0x64/0xb0 [ 166.834774] ? page_fault_oops+0x2cd/0x3f0 [ 166.843862] ? exc_page_fault+0x63/0x130 [ 166.852564] ? asm_exc_page_fault+0x22/0x30 [ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.871897] ? get_partial_node+0x1c/0x320 [ 166.880983] ? deactivate_slab+0x269/0x2b0 [ 166.890069] ___slab_alloc+0x521/0xa90 [ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.908442] __kmalloc_node_noprof+0x216/0x3f0 [ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.928354] __kvmalloc_node_noprof+0x43/0xd0 [ 166.938021] mlx5e_open_channels+0x5e2/0xc00 [ 166.947496] mlx5e_open_locked+0x3e/0xf0 [ 166.956201] mlx5e_open+0x23/0x50 [ 166.963551] __dev_open+0x114/0x1c0 [ 166.971292] __dev_change_flags+0xa2/0x1b0 [ 166.980378] dev_change_flags+0x21/0x60 [ 166.988887] do_setlink+0x38d/0xf20 [ 166.996628] ? ep_poll_callback+0x1b9/0x240 [ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70 [ 167.020782] ? __wake_up_sync_key+0x52/0x80 [ 167.030066] ? __mutex_lock+0xff/0x550 [ 167.038382] ? security_capable+0x50/0x90 [ 167.047279] rtnl_setlink+0x1c9/0x210 [ 167.055403] ? ep_poll_callback+0x1b9/0x240 [ 167.064684] ? security_capable+0x50/0x90 [ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310 [ 167.082667] ? rtnetlink_bind+0x30/0x30 [ 167.091173] netlink_rcv_skb+0xb1/0xe0 [ 167.099492] netlink_unicast+0x20f/0x2e0 [ 167.108191] netlink_sendmsg+0x389/0x420 [ 167.116896] __sys_sendto+0x158/0x1c0 [ 167.125024] __x64_sys_sendto+0x22/0x30 [ 167.133534] do_syscall_64+0x63/0x130 [ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0 [ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds in parse_sec_desc() If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd struct size. If it is smaller, It could cause slab-out-of-bounds. And when validating sid, It need to check it included subauth array size.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions the implementation of sparse reduction operations in TensorFlow can trigger accesses outside of bounds of heap allocated data. The [implementation](https://github.com/tensorflow/tensorflow/blob/a1bc56203f21a5a4995311825ffaba7a670d7747/tensorflow/core/kernels/sparse_reduce_op.cc#L217-L228) fails to validate that each reduction group does not overflow and that each corresponding index does not point to outside the bounds of the input tensor. We have patched the issue in GitHub commit 87158f43f05f2720a374f3e6d22a7aaa3a33f750. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

Address read vulnerability in the HDC module. Impact: Successful exploitation of this vulnerability will affect availability and confidentiality.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.4. A local user may be able to cause unexpected system termination or read kernel memory.