xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the `AdminPaymentPluginUpload` endpoint lets admins upload any file to `plugins/payment/`. It only checks a hardcoded password (`qweasd123456`) and ignores file content. A background watcher (`StartWatcher`) then scans this folder every 5 seconds. If it finds a new executable, it runs it immediately, resulting in RCE. Version 4.0.0 fixes the issue.

A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.

A command injection vulnerability exists where an authenticated, remote attacker with administrator privileges on the Security Center application could modify Logging parameters, which could lead to the execution of arbitrary code on the Security Center host.

A security flaw has been discovered in D-Link DNS-320 2.06B01. This affects the function delete/rename/copy/move/chmod/chown of the file /cgi-bin/webfile_mgr.cgi. The manipulation results in os command injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

An issue was discovered in Zimbra Collaboration (ZCS) 8.8.15 and 9.0. Remote code execution can occur through ClientUploader by an authenticated admin user. An authenticated admin user can upload files through the ClientUploader utility, and traverse to any other directory for remote code execution.

An arbitrary file upload vulnerability in /queuing/admin/ajax.php?action=save_settings of Dynamic Transaction Queuing System v1.0 allows attackers to execute arbitrary code via a crafted PHP file.

In AeroCms v0.0.1, there is an arbitrary file upload vulnerability at /admin/posts.php?source=edit_post , through which we can upload webshell and control the web server.

The MDJM Event Management plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.7.8.3 via the mdjm_send_comm_email function. This is due to no file type, extension, or MIME type validation being performed on uploaded files. This makes it possible for authenticated attackers, with administrator-level access and above, to upload files that may be executable, which makes remote code execution possible.

Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.

The "NagVis" component within Checkmk is vulnerable to remote code execution. An authenticated attacker with administrative level privileges is able to upload a malicious PHP file and modify specific settings to execute the contents of the file as PHP.

A vulnerability has been found in wander-chu SpringBoot-Blog 1.0 and classified as critical. This vulnerability affects the function upload of the file src/main/java/com/my/blog/website/controller/admin/AttachtController.java of the component Admin Attachment Handler. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An arbitrary file upload vulnerability in the Server Settings module of WBCE CMS v1.5.4 allows attackers to execute arbitrary code via a crafted PHP file.

A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

Concrete CMS 9.5.0 and below fails to sanitize path traversal sequences in the ptComposerFormLayoutSetControlCustomTemplate field when saving page type composer form layouts. An authenticated rogue administrator with composer form editing rights can exploit this to include arbitrary readable files on the server. Combined with the file uploader's extension-only validation (which permits PHP code in files saved with image extensions like .png), this can result in authenticated remote code execution. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 9.4 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H   Thanks Yonatan Drori (Tenzai) for reporting.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Byzoro Smart S40 Management Platform up to 20240126. Affected by this issue is some unknown functionality of the file /useratte/web.php of the component Import Handler. The manipulation of the argument file_upload leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252992. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OS command injection in Ivanti Virtual Traffic Manager before version 22.9r4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Arbitrary file upload in the PowerPress WordPress plugin, versions before 8.3.8, did not verify some of the uploaded feed images (such as the ones from Podcast Artwork section), allowing high privilege accounts (admin+) being able to upload arbitrary files, such as php, leading to RCE.

Online Leave Management System v1.0 was discovered to contain an arbitrary file upload vulnerability at /leave_system/classes/SystemSettings.php?f=update_settings. This vulnerability allows attackers to execute arbitrary code via a crafted PHP file.

Tenda W20E V16.01.0.6(3392) is vulnerable to Command injection via cmd_get_ping_output.

The Simple Schools Staff Directory WordPress plugin through 1.1 does not validate uploaded logo pictures to ensure that are indeed images, allowing high privilege users such as admin to upload arbitrary file like PHP, leading to RCE

A vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) which can allow an attacker with existing administrative privileges to inject commands and run as a site user.

A vulnerability was found in donglight bookstore电商书城系统说明 1.0. It has been declared as critical. Affected by this vulnerability is the function uploadPicture of the file src/main/java/org/zdd/bookstore/web/controller/admin/AdminBookController. java. The manipulation of the argument pictureFile leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Some Dahua software products have a vulnerability of unrestricted upload of file. After obtaining the permissions of administrators, by sending a specific crafted packet to the vulnerable interface, an attacker can upload arbitrary files.

Loomio version 2.22.0 allows executing arbitrary commands on the server. This is possible because the application is vulnerable to OS Command Injection.

A post-authentication command injection vulnerability in the ”zyUtilMailSend” function of the Zyxel AX7501-B1 firmware version V5.17(ABPC.5.3)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

An authenticated remote code execution in Kentico Xperience allows authenticated users Staging Sync Server to upload arbitrary data to path relative locations. This results in path traversal and arbitrary file upload, including content that can be executed server side leading to remote code execution.This issue affects Kentico Xperience through 13.0.178.

An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Dell Wyse Management Suite, versions prior to WMS 5.1, contains an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of service, Information disclosure, and Remote execution

LibreNMS versions before 26.3.0 are affected by an authenticated remote code execution vulnerability by abusing the Binary Locations config and the Netcommand feature. Successful exploitation requires administrative privileges. Exploitation could result in compromise of the underlying web server.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator to perform a file write via a maliciously crafted archive uploaded in the administrator web interface.

A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

An improper neutralization of special elements used in an OS Command vulnerability in the administrative interface of FortiMail before 6.4.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted HTTP requests.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

admin/app/mediamanager in Schlix CMS 2.1.8-7 allows Authenticated Unrestricted File Upload, leading to remote code execution. NOTE: "While inadvertently allowing a PHP file to be uploaded via Media Manager was an oversight, it still requires an admin permission. We think it's pretty rare for an administrator to exploit a bug on his/her own site to own his/her own site.

A Write to Arbitrary Location in Disk vulnerability exists in PRTG Network Monitor 19.1.49 and below that allows attackers to place files in arbitrary locations with SYSTEM privileges (although not controlling the contents of such files) due to insufficient sanitisation when passing arguments to the phantomjs.exe binary. In order to exploit the vulnerability, remote authenticated administrators need to create a new HTTP Full Web Page Sensor and set specific settings when executing the sensor.

The WordPress Backup and Migrate Plugin – Backup Guard WordPress plugin before 1.6.0 did not ensure that the imported files are of the SGBP format and extension, allowing high privilege users (admin+) to upload arbitrary files, including PHP ones, leading to RCE.

An issue was discovered in Poly (formerly Polycom) HDX 3.1.13. A feature exists that allows the creation of a server / client certificate, or the upload of the user certificate, on the administrator's page. The value received from the user is the factor value of a shell script on the equipment. By entering a special character (such as a single quote) in a CN or other CSR field, one can insert a command into a factor value. A system command can be executed as root.