A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability was found in Ruijie BCR810W 2.5.10. It has been rated as critical. This issue affects some unknown processing of the component Tracert Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-233477 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

SUNNET WMPro portal's file management function has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege or a privileged account can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operations or disrupt service.

A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability was found in Ruijie RG-BCR860 2.5.13 and classified as critical. This issue affects some unknown processing of the component Network Diagnostic Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-232547. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.5, FortiWeb 7.4.0 through 7.4.10, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests or CLI commands.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2790 build 20240606 and later

A vulnerability has been found in Tenda CP3 11.10.00.2311090948 and classified as critical. Affected by this vulnerability is the function sub_F3C8C of the file apollo. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.

An OS command injection vulnerability has been reported to affect Container Station. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following version: Container Station 2.6.7.44 and later

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2.800 and 8.x before 8.0.410. The VIOM web application does not validate user-supplied data and appends it to OS commands and internal binaries used by the application. An attacker with root/administrator level privileges can leverage this to read sensitive data stored on the servers, modify data or server configuration, and delete data or application configuration.

An OS Command Injection vulnerability in Parks Fiberlink 210 firmware version V2.1.14_X000 was found via the /boaform/admin/formPing target_addr parameter.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier contains a buffer overflow vulnerability in the librta.so.0.0.0 library.Successful exploitation could cause denial of service or unexpected behavior with respect to all interactions relying on the targeted vulnerable binary, including the ability to log in via the web server.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in WN-7D36QR and WN-7D36QR/UE. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker.

A command injection was identified in PRTG 23.2.84.1566 and earlier versions in the Dicom C-ECHO sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

A command injection vulnerability was found in the ping functionality of the MitraStar GPT-2741GNAC router (firmware version AR_g5.8_110WVN0b7_2). The vulnerability allows an authenticated user to execute arbitrary OS commands by sending specially crafted input to the router via the ping function.

Improper neutralization of special elements in WL-WN531AX2 firmware versions prior to 2023526 allows an attacker with an administrative privilege to execute OS commands with the root privilege.

A command injection vulnerability was identified in PRTG 23.2.84.1566 and earlier versions in the HL7 sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.

A vulnerability has been found in Teledyne FLIR AX8 up to 1.46.16. This impacts the function subscribe_to_spot/subscribe_to_delta/subscribe_to_alarm of the file /usr/www/application/models/subscriptions.php of the component Backend. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.49.16 will fix this issue. It is suggested to upgrade the affected component. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

OS command injection vulnerability exists in Wi-Fi AP UNIT allows. If this vulnerability is exploited, a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. Affected products and versions are as follows: AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPUM-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B07 and earlier

A vulnerability in the Connect Mobility Router component of MiVoice Connect versions 9.6.2208.101 and earlier could allow an authenticated attacker with internal network access to conduct a command injection attack due to insufficient restriction on URL parameters.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

An authenticated command injection vulnerability exists in the Command line interface of HPE Networking Instant On Access Points. A successful exploitation could allow a remote attacker with elevated privileges to execute arbitrary commands on the underlying operating system as a highly privileged user.

Atos Unify OpenScape SBC 10 before 10R3.1.3, OpenScape Branch 10 before 10R3.1.2, and OpenScape BCF 10 before 10R10.7.0 allow remote authenticated admins to inject commands.

WBCE CMS 1.5.3 has a command execution vulnerability via admin/languages/install.php.

Zoho ManageEngine ADManager Plus before 7181 allows for authenticated users to exploit command injection via Proxy settings.

A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The web based management of affected devices does not properly validate user input, making it susceptible to command injection. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A remote authenticated command Injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Wi-Fi AP UNIT AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B08P and earlier, AC-WAPUM-300 v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B08P and earlier allow an authenticated user with an administrative privilege to execute an arbitrary OS command.

Local user may lead to privilege escalation using Gaia Portal hostnames page.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A command injection vulnerability was discovered in Array Networks APV products. A remote attacker can send a crafted packet after logging into the affected appliance as an administrator, resulting in arbitrary shell code execution. This is fixed in 8.6.1.262 or newer and 10.4.2.93 or newer.

The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability was found in Tenda AC23 16.03.07.45_cn. It has been declared as critical. This vulnerability affects unknown code of the file /bin/ate of the component Service Port 7329. The manipulation of the argument v2 leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-228778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.2, FortiSandbox 4.4.0 through 4.4.7, FortiSandbox 4.2 all versions, FortiSandbox 4.0 all versions may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests.

On Barracuda CloudGen WAN Private Edge Gateway devices before 8 webui-sdwan-1089-8.3.1-174141891, an OS command injection vulnerability exists in /ajax/update_certificate - a crafted HTTP request allows an authenticated attacker to execute arbitrary commands. For example, a name field can contain :password and a password field can contain shell metacharacters.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages an already existing vlan configuration.