Intelbras WiFiber 120AC inMesh before 1-1-220826 allows command injection by authenticated users, as demonstrated by the /boaform/formPing6 and /boaform/formTracert URIs for ping and traceroute.

A vulnerability, which was classified as critical, has been found in Intelbras InControl 2.21.60.9. This issue affects some unknown processing of the file /v1/operador/ of the component HTTP PUT Request Handler. The manipulation leads to permission issues. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Intelbras InControl up to 2.21.57. It has been rated as critical. Affected by this issue is some unknown functionality of the file /v1/operador/ of the component Relatório de Operadores Page. The manipulation of the argument fields leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.21.58 is able to address this issue. It is recommended to upgrade the affected component. The vendor was informed early on 2024-07-19 about this issue. The release of a fixed version 2.21.58 was announced for the end of August 2024 but then was postponed until 2024-09-20.

An issue in Intelbras RX1500 v2.2.9 and RX3000 v1.0.11 allows unauthenticated attackers to execute arbitrary code via injecting a crafted payload into the ESSID name when creating a network.

MantisBT before 1.3.20 and 2.22.1 allows Post Authentication Command Injection, leading to Remote Code Execution.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

An issue was discovered in Softing uaGate (SI, MB, 840D) firmware through 1.71.00.1225. A CGI script is vulnerable to command injection via a maliciously crafted form parameter.

A command injection vulnerability exists in the Zingbox Inspector versions 1.286 and earlier, that allows for an authenticated user to execute arbitrary system commands in the CLI.

Bitbucket Server and Bitbucket Data Center versions starting from version 3.0.0 before version 5.16.11, from version 6.0.0 before 6.0.11, from version 6.1.0 before 6.1.9, from version 6.2.0 before 6.2.7, from version 6.3.0 before 6.3.6, from version 6.4.0 before 6.4.4, from version 6.5.0 before 6.5.3, from version 6.6.0 before 6.6.3, from version 6.7.0 before 6.7.3, from version 6.8.0 before 6.8.2, and from version 6.9.0 before 6.9.1 had a Remote Code Execution vulnerability via certain user input fields. A remote attacker with user level permissions can exploit this vulnerability to run arbitrary commands on the victim's systems. Using a specially crafted payload as user input, the attacker can execute arbitrary commands on the victim's Bitbucket Server or Bitbucket Data Center instance.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an IP address input field.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the restricted shell in SSH. An authenticated remote attacker could potentially exploit this vulnerability, leading to execute arbitrary commands.

Command Injection vulnerability in EmailWebPage API which can lead to a Remote Code Execution (RCE) from the Alerts Settings page.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Vulnerability in the CommandPost, Collector, and Sensor components of Fidelis Network and Deception enables an attacker with user level access to the CLI to inject root level commands into the component and neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

A improper neutralization of special elements used in an OS command ('OS Command Injection') in Fortinet FortiWLM version 8.6.1 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an XML Injection vulnerability in the Widgets Update Layout. An attacker with admin privileges can trigger a specially crafted script to achieve remote code execution.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response in an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

A Improper neutralization of special elements used in a command ('Command Injection') in Fortinet FortiWeb version 6.3.13 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

Multiple command injection vulnerabilities in the command line interpreter of FortiWeb versions 6.4.1, 6.4.0, 6.3.0 through 6.3.15, 6.2.0 through 6.2.6, and 6.1.0 through 6.1.2 may allow an authenticated attacker to execute arbitrary commands on the underlying system shell via specially crafted command arguments.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRRuleFilter/set_firewall_level which receives parameters by POST request, and the parameter firewall_level has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

A vulnerability in the ClearPass Policy Manager web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as a non-privileged user on the underlying operating system leading to partial system compromise.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

An exploitable command execution vulnerability exists in Information Builders WebFOCUS Business Intelligence Portal 8.1 . A specially crafted web parameter can cause a command injection. An authenticated attacker can send a crafted web request to trigger this vulnerability.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7900 before 1.0.4.38, R7900P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX200 before 1.0.3.106, MR60 before 1.0.6.110, RAX45 before 1.0.2.72, RAX80 before 1.0.3.106, MS60 before 1.0.6.110, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, RBR750 before 3.2.16.6, RBR850 before 3.2.16.6, RBS750 before 3.2.16.6, RBS850 before 3.2.16.6, RBK752 before 3.2.16.6, and RBK852 before 3.2.16.6.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in task management component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 has a command injection vulnerability in their implementation of their binaries and handling of network requests.