A denial of service (DOS) issue was found in the Linux kernel’s smb2_ioctl_query_info function in the fs/cifs/smb2ops.c Common Internet File System (CIFS) due to an incorrect return from the memdup_user function. This flaw allows a local, privileged (CAP_SYS_ADMIN) attacker to crash the system.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix queues reservation for XDP When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI.

In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe() I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:fb_destroy_modelist+0x38/0x100 ... Call Trace: ufx_usb_probe.cold+0x2b5/0xac1 [smscufx] usb_probe_interface+0x1aa/0x3c0 [usbcore] really_probe+0x167/0x460 ... ret_from_fork+0x1f/0x30 If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will be called to destroy modelist in the error handling path. But modelist has not been initialized yet, so it will result in null-ptr-deref. Initialize modelist before calling fb_alloc_cmap() to fix this bug.

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_TREE_CONNECT and SMB2_QUERY_INFO commands. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system.

A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.

A flaw was found in the Linux kernel. A null pointer dereference in bond_ipsec_add_sa() may lead to local denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix segfault in nfc_genl_dump_devices_done When kmalloc in nfc_genl_dump_devices() fails then nfc_genl_dump_devices_done() segfaults as below KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:klist_iter_exit+0x26/0x80 Call Trace: <TASK> class_dev_iter_exit+0x15/0x20 nfc_genl_dump_devices_done+0x3b/0x50 genl_lock_done+0x84/0xd0 netlink_sock_destruct+0x8f/0x270 __sk_destruct+0x64/0x3b0 sk_destruct+0xa8/0xd0 __sk_free+0x2e8/0x3d0 sk_free+0x51/0x90 netlink_sock_destruct_work+0x1c/0x20 process_one_work+0x411/0x710 worker_thread+0x6fd/0xa80

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: prevent the potentially use of null pointer There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

A flaw null pointer dereference in the Linux kernel UDF file system functionality was found in the way user triggers udf_file_write_iter function for the malicious UDF image. A local user could use this flaw to crash the system. Actual from Linux kernel 4.2-rc1 till 5.17-rc2.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Don't call kcalloc() if size arg is zero If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023)

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: fix PCI-E clock oops Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]---

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Co ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io().

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

A NULL pointer dereference vulnerability was found in netlink_dump. This issue can occur when the Netlink socket receives the message(sendmsg) for the XFRM_MSG_GETSA, XFRM_MSG_GETPOLICY type message, and the DUMP flag is set and can cause a denial of service or possibly another unspecified impact. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is unlikely.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix dereference of null pointer flow In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference")

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe When we converted this code to use dev_err_probe() we accidentally removed a return. It means that if devm_clk_get() it will lead to an Oops when we call clk_get_rate() on the next line.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again.

In the Linux kernel, the following vulnerability has been resolved: gve: Add NULL pointer checks when freeing irqs. When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX flush done handling We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way).

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.