In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix race between cache write completion and ALL_QUEUED being set When netfslib is issuing subrequests, the subrequests start processing immediately and may complete before we reach the end of the issuing function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED to indicate to the collector that we aren't going to issue any more subreqs and that it can do the final notifications and cleanup. Now, this isn't a problem if the request is synchronous (NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be done in-thread and we're guaranteed an opportunity to run the collector. However, if the request is asynchronous, collection is primarily triggered by the termination of subrequests queuing it on a workqueue. Now, a race can occur here if the app thread sets ALL_QUEUED after the last subrequest terminates. This can happen most easily with the copy2cache code (as used by Ceph) where, in the collection routine of a read request, an asynchronous write request is spawned to copy data to the cache. Folios are added to the write request as they're unlocked, but there may be a delay before ALL_QUEUED is set as the write subrequests may complete before we get there. If all the write subreqs have finished by the ALL_QUEUED point, no further events happen and the collection never happens, leaving the request hanging. Fix this by queuing the collector after setting ALL_QUEUED. This is a bit heavy-handed and it may be sufficient to do it only if there are no extant subreqs. Also add a tracepoint to cross-reference both requests in a copy-to-request operation and add a trace to the netfs_rreq tracepoint to indicate the setting of ALL_QUEUED.

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history.

In the Linux kernel, the following vulnerability has been resolved: USB: wdm: close race between wdm_open and wdm_wwan_port_stop Clearing WDM_WWAN_IN_USE must be the last action or we can open a chardev whose URBs are still poisoned

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix data race in show_numa_info() The following data-race was found in show_numa_info(): ================================================================== BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0: show_numa_info mm/vmalloc.c:4936 [inline] vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1: show_numa_info mm/vmalloc.c:4934 [inline] vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... value changed: 0x0000008f -> 0x00000000 ================================================================== According to this report,there is a read/write data-race because m->private is accessible to multiple CPUs. To fix this, instead of allocating the heap in proc_vmalloc_init() and passing the heap address to m->private, vmalloc_info_show() should allocate the heap.

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs' runqueues. If one of the locks aren't readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: initialize state_ptrs earlier in xfrm_state_find In case of preemption, xfrm_state_look_at will find a different pcpu_id and look up states for that other CPU. If we matched a state for CPU2 in the state_cache while the lookup started on CPU1, we will jump to "found", but the "best" state that we got will be ignored and we will enter the "acquire" block. This block uses state_ptrs, which isn't initialized at this point. Let's initialize state_ptrs just after taking rcu_read_lock. This will also prevent a possible misuse in the future, if someone adjusts this function.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid Priority Inversion in SRIOV RLCG Register Access is a way for virtual functions to safely access GPU registers in a virtualized environment., including TLB flushes and register reads. When multiple threads or VFs try to access the same registers simultaneously, it can lead to race conditions. By using the RLCG interface, the driver can serialize access to the registers. This means that only one thread can access the registers at a time, preventing conflicts and ensuring that operations are performed correctly. Additionally, when a low-priority task holds a mutex that a high-priority task needs, ie., If a thread holding a spinlock tries to acquire a mutex, it can lead to priority inversion. register access in amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical. The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being called, which attempts to acquire the mutex. This function is invoked from amdgpu_sriov_wreg, which in turn is called from gmc_v11_0_flush_gpu_tlb. The [ BUG: Invalid wait context ] indicates that a thread is trying to acquire a mutex while it is in a context that does not allow it to sleep (like holding a spinlock). Fixes the below: [ 253.013423] ============================= [ 253.013434] [ BUG: Invalid wait context ] [ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 253.013464] ----------------------------- [ 253.013475] kworker/0:1/10 is trying to lock: [ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.013815] other info that might help us debug this: [ 253.013827] context-{4:4} [ 253.013835] 3 locks held by kworker/0:1/10: [ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu] [ 253.014154] stack backtrace: [ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024 [ 253.014224] Workqueue: events work_for_cpu_fn [ 253.014241] Call Trace: [ 253.014250] <TASK> [ 253.014260] dump_stack_lvl+0x9b/0xf0 [ 253.014275] dump_stack+0x10/0x20 [ 253.014287] __lock_acquire+0xa47/0x2810 [ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014321] lock_acquire+0xd1/0x300 [ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014562] ? __lock_acquire+0xa6b/0x2810 [ 253.014578] __mutex_lock+0x85/0xe20 [ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014782] ? sched_clock_noinstr+0x9/0x10 [ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014808] ? local_clock_noinstr+0xe/0xc0 [ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.015029] mutex_lock_nested+0x1b/0x30 [ 253.015044] ? mutex_lock_nested+0x1b/0x30 [ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu] [ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu] [ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu] [ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu] [ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu] [ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu] [ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu] [ 253.0170 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: kcm: Fix race condition in kcm_unattach() syzbot found a race condition when kcm_unattach(psock) and kcm_release(kcm) are executed at the same time. kcm_unattach() is missing a check of the flag kcm->tx_stopped before calling queue_work(). If the kcm has a reserved psock, kcm_unattach() might get executed between cancel_work_sync() and unreserve_psock() in kcm_release(), requeuing kcm->tx_work right before kcm gets freed in kcm_done(). Remove kcm->tx_stopped and replace it by the less error-prone disable_work_sync().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a race between renames and directory logging We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning af ---truncated---

In the Linux kernel, the following vulnerability has been resolved: virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN syzbot reports a data-race when accessing the event_triggered, here is the simplified stack when the issue occurred: ================================================================== BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0: virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653 start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3800 [inline] read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1: virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline] virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566 skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777 vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715 __handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158 handle_irq_event_percpu kernel/irq/handle.c:193 [inline] value changed: 0x01 -> 0x00 ================================================================== When the data race occurs, the function virtqueue_enable_cb_delayed() sets event_triggered to false, and virtqueue_disable_cb_split/packed() reads it as false due to the race condition. Since event_triggered is an unreliable hint used for optimization, this should only cause the driver temporarily suggest that the device not send an interrupt notification when the event index is used. Fix this KCSAN reported data-race issue by explicitly tagging the access as data_racy.

In the Linux kernel, the following vulnerability has been resolved: NFS/localio: Fix a race in nfs_local_open_fh() Once the clp->cl_uuid.lock has been dropped, another CPU could come in and free the struct nfsd_file that was just added. To prevent that from happening, take the RCU read lock before dropping the spin lock.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE

In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned.

In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd() Memory hot remove unmaps and tears down various kernel page table regions as required. The ptdump code can race with concurrent modifications of the kernel page tables. When leaf entries are modified concurrently, the dump code may log stale or inconsistent information for a VA range, but this is otherwise not harmful. But when intermediate levels of kernel page table are freed, the dump code will continue to use memory that has been freed and potentially reallocated for another purpose. In such cases, the ptdump code may dereference bogus addresses, leading to a number of potential problems. To avoid the above mentioned race condition, platforms such as arm64, riscv and s390 take memory hotplug lock, while dumping kernel page table via the sysfs interface /sys/kernel/debug/kernel_page_tables. Similar race condition exists while checking for pages that might have been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages which in turn calls ptdump_check_wx(). Instead of solving this race condition again, let's just move the memory hotplug lock inside generic ptdump_check_wx() which will benefit both the scenarios. Drop get_online_mems() and put_online_mems() combination from all existing platform ptdump code paths.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between async reclaim worker and close_ctree() Syzbot reported an assertion failure due to an attempt to add a delayed iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state: WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Modules linked in: CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: btrfs-endio-write btrfs_work_helper RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Code: 4e ad 5d (...) RSP: 0018:ffffc9000213f780 EFLAGS: 00010293 RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000 RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001 R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635 btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312 btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> This can happen due to a race with the async reclaim worker like this: 1) The async metadata reclaim worker enters shrink_delalloc(), which calls btrfs_start_delalloc_roots() with an nr_pages argument that has a value less than LONG_MAX, and that in turn enters start_delalloc_inodes(), which sets the local variable 'full_flush' to false because wbc->nr_to_write is less than LONG_MAX; 2) There it finds inode X in a root's delalloc list, grabs a reference for inode X (with igrab()), and triggers writeback for it with filemap_fdatawrite_wbc(), which creates an ordered extent for inode X; 3) The unmount sequence starts from another task, we enter close_ctree() and we flush the workqueue fs_info->endio_write_workers, which waits for the ordered extent for inode X to complete and when dropping the last reference of the ordered extent, with btrfs_put_ordered_extent(), when we call btrfs_add_delayed_iput() we don't add the inode to the list of delayed iputs because it has a refcount of 2, so we decrement it to 1 and return; 4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state; 5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now calls btrfs_add_delayed_iput() for inode X and there we trigger an assertion failure since the fs_info state has the flag BTRFS_FS_STATE_NO_DELAYED_IPUT set. Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for the async reclaim workers to finish, after we call cancel_work_sync() for them at close_ctree(), and by running delayed iputs after wait for the reclaim workers to finish and before setting the bit. This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed"). Without the new validation at btrfs_add_delayed_iput(), ---truncated---

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix race between nfsd registration and exports_proc As of now nfsd calls create_proc_exports_entry() at start of init_nfsd and cleanup by remove_proc_entry() at last of exit_nfsd. Which causes kernel OOPs if there is race between below 2 operations: (i) exportfs -r (ii) mount -t nfsd none /proc/fs/nfsd for 5.4 kernel ARM64: CPU 1: el1_irq+0xbc/0x180 arch_counter_get_cntvct+0x14/0x18 running_clock+0xc/0x18 preempt_count_add+0x88/0x110 prep_new_page+0xb0/0x220 get_page_from_freelist+0x2d8/0x1778 __alloc_pages_nodemask+0x15c/0xef0 __vmalloc_node_range+0x28c/0x478 __vmalloc_node_flags_caller+0x8c/0xb0 kvmalloc_node+0x88/0xe0 nfsd_init_net+0x6c/0x108 [nfsd] ops_init+0x44/0x170 register_pernet_operations+0x114/0x270 register_pernet_subsys+0x34/0x50 init_nfsd+0xa8/0x718 [nfsd] do_one_initcall+0x54/0x2e0 CPU 2 : Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 PC is at : exports_net_open+0x50/0x68 [nfsd] Call trace: exports_net_open+0x50/0x68 [nfsd] exports_proc_open+0x2c/0x38 [nfsd] proc_reg_open+0xb8/0x198 do_dentry_open+0x1c4/0x418 vfs_open+0x38/0x48 path_openat+0x28c/0xf18 do_filp_open+0x70/0xe8 do_sys_open+0x154/0x248 Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu(). and same is happening on latest 6.14 kernel as well: [ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty ... [ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48 ... [ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4 ... [ 285.469695] Call trace: [ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P) [ 285.470488] seq_read+0xe0/0x11c [ 285.470675] proc_reg_read+0x9c/0xf0 [ 285.470874] vfs_read+0xc4/0x2fc [ 285.471057] ksys_read+0x6c/0xf4 [ 285.471231] __arm64_sys_read+0x1c/0x28 [ 285.471428] invoke_syscall+0x44/0x100 [ 285.471633] el0_svc_common.constprop.0+0x40/0xe0 [ 285.471870] do_el0_svc_compat+0x1c/0x34 [ 285.472073] el0_svc_compat+0x2c/0x80 [ 285.472265] el0t_32_sync_handler+0x90/0x140 [ 285.472473] el0t_32_sync+0x19c/0x1a0 [ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3) [ 285.473422] ---[ end trace 0000000000000000 ]--- It reproduced simply with below script: while [ 1 ] do /exportfs -r done & while [ 1 ] do insmod /nfsd.ko mount -t nfsd none /proc/fs/nfsd umount /proc/fs/nfsd rmmod nfsd done & So exporting interfaces to user space shall be done at last and cleanup at first place. With change there is no Kernel OOPs.

In the Linux kernel, the following vulnerability has been resolved: fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount() Normally do_lock_mount(path, _) is locking a mountpoint pinned by *path and at the time when matching unlock_mount() unlocks that location it is still pinned by the same thing. Unfortunately, for 'beneath' case it's no longer that simple - the object being locked is not the one *path points to. It's the mountpoint of path->mnt. The thing is, without sufficient locking ->mnt_parent may change under us and none of the locks are held at that point. The rules are * mount_lock stabilizes m->mnt_parent for any mount m. * namespace_sem stabilizes m->mnt_parent, provided that m is mounted. * if either of the above holds and refcount of m is positive, we are guaranteed the same for refcount of m->mnt_parent. namespace_sem nests inside inode_lock(), so do_lock_mount() has to take inode_lock() before grabbing namespace_sem. It does recheck that path->mnt is still mounted in the same place after getting namespace_sem, and it does take care to pin the dentry. It is needed, since otherwise we might end up with racing mount --move (or umount) happening while we were getting locks; in that case dentry would no longer be a mountpoint and could've been evicted on memory pressure along with its inode - not something you want when grabbing lock on that inode. However, pinning a dentry is not enough - the matching mount is also pinned only by the fact that path->mnt is mounted on top it and at that point we are not holding any locks whatsoever, so the same kind of races could end up with all references to that mount gone just as we are about to enter inode_lock(). If that happens, we are left with filesystem being shut down while we are holding a dentry reference on it; results are not pretty. What we need to do is grab both dentry and mount at the same time; that makes inode_lock() safe *and* avoids the problem with fs getting shut down under us. After taking namespace_sem we verify that path->mnt is still mounted (which stabilizes its ->mnt_parent) and check that it's still mounted at the same place. From that point on to the matching namespace_unlock() we are guaranteed that mount/dentry pair we'd grabbed are also pinned by being the mountpoint of path->mnt, so we can quietly drop both the dentry reference (as the current code does) and mnt one - it's OK to do under namespace_sem, since we are not dropping the final refs. That solves the problem on do_lock_mount() side; unlock_mount() also has one, since dentry is guaranteed to stay pinned only until the namespace_unlock(). That's easy to fix - just have inode_unlock() done earlier, while it's still pinned by mp->m_dentry.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race condition in AF_XDP generic RX path Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop.

In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix race in netlink owner interface destruction My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once.

A use-after-free vulnerability was found in network namespaces code affecting the Linux kernel before 4.14.11. The function get_net_ns_by_id() in net/core/net_namespace.c does not check for the net::count value after it has found a peer network in netns_ids idr, which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is thought to be unlikely.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix crash on racing fsync and size-extending write into prealloc We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix race between unprepare and queue_buf A client driver may use mhi_unprepare_from_transfer() to quiesce incoming data during the client driver's tear down. The client driver might also be processing data at the same time, resulting in a call to mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs after mhi_unprepare_from_transfer() has torn down the channel, a panic will occur due to an invalid dereference leading to a page fault. This occurs because mhi_gen_tre() does not verify the channel state after locking it. Fix this by having mhi_gen_tre() confirm the channel state is valid, or return error to avoid accessing deinitialized data. [mani: added stable tag]

In the Linux kernel, the following vulnerability has been resolved: mm: fix kernel BUG when userfaultfd_move encounters swapcache userfaultfd_move() checks whether the PTE entry is present or a swap entry. - If the PTE entry is present, move_present_pte() handles folio migration by setting: src_folio->index = linear_page_index(dst_vma, dst_addr); - If the PTE entry is a swap entry, move_swap_pte() simply copies the PTE to the new dst_addr. This approach is incorrect because, even if the PTE is a swap entry, it can still reference a folio that remains in the swap cache. This creates a race window between steps 2 and 4. 1. add_to_swap: The folio is added to the swapcache. 2. try_to_unmap: PTEs are converted to swap entries. 3. pageout: The folio is written back. 4. Swapcache is cleared. If userfaultfd_move() occurs in the window between steps 2 and 4, after the swap PTE has been moved to the destination, accessing the destination triggers do_swap_page(), which may locate the folio in the swapcache. However, since the folio's index has not been updated to match the destination VMA, do_swap_page() will detect a mismatch. This can result in two critical issues depending on the system configuration. If KSM is disabled, both small and large folios can trigger a BUG during the add_rmap operation due to: page_pgoff(folio, page) != linear_page_index(vma, address) [ 13.336953] page: refcount:6 mapcount:1 mapping:00000000f43db19c index:0xffffaf150 pfn:0x4667c [ 13.337520] head: order:2 mapcount:1 entire_mapcount:0 nr_pages_mapped:1 pincount:0 [ 13.337716] memcg:ffff00000405f000 [ 13.337849] anon flags: 0x3fffc0000020459(locked|uptodate|dirty|owner_priv_1|head|swapbacked|node=0|zone=0|lastcpupid=0xffff) [ 13.338630] raw: 03fffc0000020459 ffff80008507b538 ffff80008507b538 ffff000006260361 [ 13.338831] raw: 0000000ffffaf150 0000000000004000 0000000600000000 ffff00000405f000 [ 13.339031] head: 03fffc0000020459 ffff80008507b538 ffff80008507b538 ffff000006260361 [ 13.339204] head: 0000000ffffaf150 0000000000004000 0000000600000000 ffff00000405f000 [ 13.339375] head: 03fffc0000000202 fffffdffc0199f01 ffffffff00000000 0000000000000001 [ 13.339546] head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 13.339736] page dumped because: VM_BUG_ON_PAGE(page_pgoff(folio, page) != linear_page_index(vma, address)) [ 13.340190] ------------[ cut here ]------------ [ 13.340316] kernel BUG at mm/rmap.c:1380! [ 13.340683] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 13.340969] Modules linked in: [ 13.341257] CPU: 1 UID: 0 PID: 107 Comm: a.out Not tainted 6.14.0-rc3-gcf42737e247a-dirty #299 [ 13.341470] Hardware name: linux,dummy-virt (DT) [ 13.341671] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 13.341815] pc : __page_check_anon_rmap+0xa0/0xb0 [ 13.341920] lr : __page_check_anon_rmap+0xa0/0xb0 [ 13.342018] sp : ffff80008752bb20 [ 13.342093] x29: ffff80008752bb20 x28: fffffdffc0199f00 x27: 0000000000000001 [ 13.342404] x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000001 [ 13.342575] x23: 0000ffffaf0d0000 x22: 0000ffffaf0d0000 x21: fffffdffc0199f00 [ 13.342731] x20: fffffdffc0199f00 x19: ffff000006210700 x18: 00000000ffffffff [ 13.342881] x17: 6c203d2120296567 x16: 6170202c6f696c6f x15: 662866666f67705f [ 13.343033] x14: 6567617028454741 x13: 2929737365726464 x12: ffff800083728ab0 [ 13.343183] x11: ffff800082996bf8 x10: 0000000000000fd7 x9 : ffff80008011bc40 [ 13.343351] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000829eebf8 [ 13.343498] x5 : c0000000fffff000 x4 : 0000000000000000 x3 : 0000000000000000 [ 13.343645] x2 : 0000000000000000 x1 : ffff0000062db980 x0 : 000000000000005f [ 13.343876] Call trace: [ 13.344045] __page_check_anon_rmap+0xa0/0xb0 (P) [ 13.344234] folio_add_anon_rmap_ptes+0x22c/0x320 [ 13.344333] do_swap_page+0x1060/0x1400 [ 13.344417] __handl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race condition when gathering fdinfo group samples Commit e16635d88fa0 ("drm/panthor: add DRM fdinfo support") failed to protect access to groups with an xarray lock, which could lead to use-after-free errors.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix type confusion via race condition when using ipc_msg_send_request req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on ida_alloc. req->handle from ksmbd_ipc_login_request and FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion between messages, resulting in access to unexpected parts of memory after an incorrect delivery. ksmbd check type of ipc response but missing add continue to check next ipc reponse.

In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block group refcount race in btrfs_create_pending_block_groups() Block group creation is done in two phases, which results in a slightly unintuitive property: a block group can be allocated/deallocated from after btrfs_make_block_group() adds it to the space_info with btrfs_add_bg_to_space_info(), but before creation is completely completed in btrfs_create_pending_block_groups(). As a result, it is possible for a block group to go unused and have 'btrfs_mark_bg_unused' called on it concurrently with 'btrfs_create_pending_block_groups'. This causes a number of issues, which were fixed with the block group flag 'BLOCK_GROUP_FLAG_NEW'. However, this fix is not quite complete. Since it does not use the unused_bg_lock, it is possible for the following race to occur: btrfs_create_pending_block_groups btrfs_mark_bg_unused if list_empty // false list_del_init clear_bit else if (test_bit) // true list_move_tail And we get into the exact same broken ref count and invalid new_bgs state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to prevent. The broken refcount aspect will result in a warning like: [1272.943527] refcount_t: underflow; use-after-free. [1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs] [1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G W 6.14.0-rc5+ #108 [1272.946368] Tainted: [W]=WARN [1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs] [1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110 [1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282 [1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000 [1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff [1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268 [1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0 [1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0 [1272.952850] FS: 0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000 [1272.953458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0 [1272.954474] Call Trace: [1272.954655] <TASK> [1272.954812] ? refcount_warn_saturate+0xba/0x110 [1272.955173] ? __warn.cold+0x93/0xd7 [1272.955487] ? refcount_warn_saturate+0xba/0x110 [1272.955816] ? report_bug+0xe7/0x120 [1272.956103] ? handle_bug+0x53/0x90 [1272.956424] ? exc_invalid_op+0x13/0x60 [1272.956700] ? asm_exc_invalid_op+0x16/0x20 [1272.957011] ? refcount_warn_saturate+0xba/0x110 [1272.957399] btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs] [1272.957853] btrfs_put_block_group.cold+0x5d/0x8e [btrfs] [1272.958289] btrfs_discard_workfn+0x194/0x380 [btrfs] [1272.958729] process_one_work+0x130/0x290 [1272.959026] worker_thread+0x2ea/0x420 [1272.959335] ? __pfx_worker_thread+0x10/0x10 [1272.959644] kthread+0xd7/0x1c0 [1272.959872] ? __pfx_kthread+0x10/0x10 [1272.960172] ret_from_fork+0x30/0x50 [1272.960474] ? __pfx_kthread+0x10/0x10 [1272.960745] ret_from_fork_asm+0x1a/0x30 [1272.961035] </TASK> [1272.961238] ---[ end trace 0000000000000000 ]--- Though we have seen them in the async discard workfn as well. It is most likely to happen after a relocation finishes which cancels discard, tears down the block group, etc. Fix this fully by taking the lock arou ---truncated---

In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ]

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error This patch addresses a race condition for an ODP MR that can result in a CQE with an error on the UMR QP. During the __mlx5_ib_dereg_mr() flow, the following sequence of calls occurs: mlx5_revoke_mr() mlx5r_umr_revoke_mr() mlx5r_umr_post_send_wait() At this point, the lkey is freed from the hardware's perspective. However, concurrently, mlx5_ib_invalidate_range() might be triggered by another task attempting to invalidate a range for the same freed lkey. This task will: - Acquire the umem_odp->umem_mutex lock. - Call mlx5r_umr_update_xlt() on the UMR QP. - Since the lkey has already been freed, this can lead to a CQE error, causing the UMR QP to enter an error state [1]. To resolve this race condition, the umem_odp->umem_mutex lock is now also acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke, we set umem_odp->private which points to that MR to NULL, preventing any further invalidation attempts on its lkey. [1] From dmesg: infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2 WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] [..] Call Trace: <TASK> mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib] mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x1e1/0x240 zap_page_range_single+0xf1/0x1a0 madvise_vma_behavior+0x677/0x6e0 do_madvise+0x1a2/0x4b0 __x64_sys_madvise+0x25/0x30 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: net: hns3: don't auto enable misc vector Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq..

In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Fix a race during cpuhp processing There is another found exception that the "timerlat/1" thread was scheduled on CPU0, and lead to timer corruption finally: ``` ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220 WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0 Modules linked in: CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: <TASK> ? __warn+0x7c/0x110 ? debug_print_object+0x7d/0xb0 ? report_bug+0xf1/0x1d0 ? prb_read_valid+0x17/0x20 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? debug_print_object+0x7d/0xb0 ? debug_print_object+0x7d/0xb0 ? __pfx_timerlat_irq+0x10/0x10 __debug_object_init+0x110/0x150 hrtimer_init+0x1d/0x60 timerlat_main+0xab/0x2d0 ? __pfx_timerlat_main+0x10/0x10 kthread+0xb7/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ``` After tracing the scheduling event, it was discovered that the migration of the "timerlat/1" thread was performed during thread creation. Further analysis confirmed that it is because the CPU online processing for osnoise is implemented through workers, which is asynchronous with the offline processing. When the worker was scheduled to create a thread, the CPU may has already been removed from the cpu_online_mask during the offline process, resulting in the inability to select the right CPU: T1 | T2 [CPUHP_ONLINE] | cpu_device_down() osnoise_hotplug_workfn() | | cpus_write_lock() | takedown_cpu(1) | cpus_write_unlock() [CPUHP_OFFLINE] | cpus_read_lock() | start_kthread(1) | cpus_read_unlock() | To fix this, skip online processing if the CPU is already offline.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix race in z_erofs_get_gbuf() In z_erofs_get_gbuf(), the current task may be migrated to another CPU between `z_erofs_gbuf_id()` and `spin_lock(&gbuf->lock)`. Therefore, z_erofs_put_gbuf() will trigger the following issue which was found by stress test: <2>[772156.434168] kernel BUG at fs/erofs/zutil.c:58! .. <4>[772156.435007] <4>[772156.439237] CPU: 0 PID: 3078 Comm: stress Kdump: loaded Tainted: G E 6.10.0-rc7+ #2 <4>[772156.439239] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 1.0.0 01/01/2017 <4>[772156.439241] pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) <4>[772156.439243] pc : z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.439252] lr : z_erofs_lz4_decompress+0x600/0x6a0 [erofs] .. <6>[772156.445958] stress (3127): drop_caches: 1 <4>[772156.446120] Call trace: <4>[772156.446121] z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.446761] z_erofs_lz4_decompress+0x600/0x6a0 [erofs] <4>[772156.446897] z_erofs_decompress_queue+0x740/0xa10 [erofs] <4>[772156.447036] z_erofs_runqueue+0x428/0x8c0 [erofs] <4>[772156.447160] z_erofs_readahead+0x224/0x390 [erofs] ..

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback.

In the Linux kernel, the following vulnerability has been resolved: filelock: Fix fcntl/close race recovery compat path When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels. Thanks to Greg KH for stumbling over this while doing the stable backport... Apply exactly the same fix to the compat path for 32-bit kernels.

In the Linux kernel, the following vulnerability has been resolved: netpoll: Fix race condition in netpoll_owner_active KCSAN detected a race condition in netpoll: BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10: net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822) <snip> read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2: netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393) netpoll_send_udp (net/core/netpoll.c:?) <snip> value changed: 0x0000000a -> 0xffffffff This happens because netpoll_owner_active() needs to check if the current CPU is the owner of the lock, touching napi->poll_owner non atomically. The ->poll_owner field contains the current CPU holding the lock. Use an atomic read to check if the poll owner is the current CPU.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix races between hole punching and AIO+DIO After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block", fstests/generic/300 become from always failed to sometimes failed: ======================================================================== [ 473.293420 ] run fstests generic/300 [ 475.296983 ] JBD2: Ignoring recovery information on journal [ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode. [ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found [ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted. [ 494.292018 ] OCFS2: File system is now read-only. [ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30 [ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3 fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072 ========================================================================= In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten extents to a list. extents are also inserted into extent tree in ocfs2_write_begin_nolock. Then another thread call fallocate to puch a hole at one of the unwritten extent. The extent at cpos was removed by ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list found there is no such extent at the cpos. T1 T2 T3 inode lock ... insert extents ... inode unlock ocfs2_fallocate __ocfs2_change_file_space inode lock lock ip_alloc_sem ocfs2_remove_inode_range inode ocfs2_remove_btree_range ocfs2_remove_extent ^---remove the extent at cpos 78723 ... unlock ip_alloc_sem inode unlock ocfs2_dio_end_io ocfs2_dio_end_io_write lock ip_alloc_sem ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_search_extent_list ^---failed to find extent ... unlock ip_alloc_sem In most filesystems, fallocate is not compatible with racing with AIO+DIO, so fix it by adding to wait for all dio before fallocate/punch_hole like ext4.

In the Linux kernel, the following vulnerability has been resolved: sock_map: avoid race between sock_map_close and sk_psock_put sk_psock_get will return NULL if the refcount of psock has gone to 0, which will happen when the last call of sk_psock_put is done. However, sk_psock_drop may not have finished yet, so the close callback will still point to sock_map_close despite psock being NULL. This can be reproduced with a thread deleting an element from the sock map, while the second one creates a socket, adds it to the map and closes it. That will trigger the WARN_ON_ONCE: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Modules linked in: CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02 RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293 RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000 RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0 RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3 R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840 R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870 FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0 Call Trace: <TASK> unix_release+0x87/0xc0 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0xbe/0x240 net/socket.c:1421 __fput+0x42b/0x8a0 fs/file_table.c:422 __do_sys_close fs/open.c:1556 [inline] __se_sys_close fs/open.c:1541 [inline] __x64_sys_close+0x7f/0x110 fs/open.c:1541 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb37d618070 Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070 RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Use sk_psock, which will only check that the pointer is not been set to NULL yet, which should only happen after the callbacks are restored. If, then, a reference can still be gotten, we may call sk_psock_stop and cancel psock->work. As suggested by Paolo Abeni, reorder the condition so the control flow is less convoluted. After that change, the reproducer does not trigger the WARN_ON_ONCE anymore.

In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: Use set_bit() and test_bit() at worker->flags Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq to address potential data races. The structure io_worker->flags may be accessed through various data paths, leading to concurrency issues. When KCSAN is enabled, it reveals data races occurring in io_worker_handle_work and io_wq_activate_free_worker functions. BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28: io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569) io_wq_worker (io_uring/io-wq.c:?) <snip> read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5: io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285) io_wq_enqueue (io_uring/io-wq.c:947) io_queue_iowq (io_uring/io_uring.c:524) io_req_task_submit (io_uring/io_uring.c:1511) io_handle_tw_list (io_uring/io_uring.c:1198) <snip> Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm"). These races involve writes and reads to the same memory location by different tasks running on different CPUs. To mitigate this, refactor the code to use atomic operations such as set_bit(), test_bit(), and clear_bit() instead of basic "and" and "or" operations. This ensures thread-safe manipulation of worker flags. Also, move `create_index` to avoid holes in the structure.

In the Linux kernel, the following vulnerability has been resolved: Revert "xsk: Support redirect to any socket bound to the same umem" This reverts commit 2863d665ea41282379f108e4da6c8a2366ba66db. This patch introduced a potential kernel crash when multiple napi instances redirect to the same AF_XDP socket. By removing the queue_index check, it is possible for multiple napi instances to access the Rx ring at the same time, which will result in a corrupted ring state which can lead to a crash when flushing the rings in __xsk_flush(). This can happen when the linked list of sockets to flush gets corrupted by concurrent accesses. A quick and small fix is not possible, so let us revert this for now.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix a race between readers and resize checks The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab792705c ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix uninit-value access in __ip_make_skb() KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable idle reallow as part of command/gpint execution [Why] Workaroud for a race condition where DMCUB is in the process of committing to IPS1 during the handshake causing us to miss the transition into IPS2 and touch the INBOX1 RPTR causing a HW hang. [How] Disable the reallow to ensure that we have enough of a gap between entry and exit and we're not seeing back-to-back wake_and_executes.

In the Linux kernel, the following vulnerability has been resolved: eeprom: at24: fix memory corruption race condition If the eeprom is not accessible, an nvmem device will be registered, the read will fail, and the device will be torn down. If another driver accesses the nvmem device after the teardown, it will reference invalid memory. Move the failure point before registering the nvmem device.

In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio() When I did memory failure tests recently, below warning occurs: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0 Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0 Call Trace: <TASK> lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> panic+0x326/0x350 check_panic_on_warn+0x4f/0x50 __warn+0x98/0x190 report_bug+0x18e/0x1a0 handle_bug+0x3d/0x70 exc_invalid_op+0x18/0x70 asm_exc_invalid_op+0x1a/0x20 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> After git bisecting and digging into the code, I believe the root cause is that _deferred_list field of folio is unioned with _hugetlb_subpool field. In __update_and_free_hugetlb_folio(), folio->_deferred_ ---truncated---