An authentication flaw in the AVPNC_RP service in Aviatrix VPN Client through 2.2.10 allows an attacker to gain elevated privileges through arbitrary code execution on Windows, Linux, and macOS.

Improper initialization in the Intel(R) SGX SDK before v2.6.100.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

An issue was discovered in Eracent EPA Agent through 10.2.26. The agent executable, when installed for non-root operations (scanning), can be used to start external programs with elevated permissions because of an Untrusted Search Path.

An issue was discovered in the Linux kernel before 5.0.10. SMB2_negotiate in fs/cifs/smb2pdu.c has an out-of-bounds read because data structures are incompletely updated after a change from smb30 to smb21.

In shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, shiftfs_btrfs_ioctl_fd_replace() calls fdget(oldfd), then without further checks passes the resulting file* into shiftfs_real_fdget(), which casts file->private_data, a void* that points to a filesystem-dependent type, to a "struct shiftfs_file_info *". As the private_data is not required to be a pointer, an attacker can use this to cause a denial of service or possibly execute arbitrary code.

An issue was discovered in the Linux kernel before 5.2.3. An out of bounds access exists in the function hclge_tm_schd_mode_vnet_base_cfg in the file drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv" instead of afe_priv which has the size of "struct mt8365_afe_private". Otherwise the KASAN complains about. [ 59.389765] BUG: KASAN: global-out-of-bounds in mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm] ... [ 59.394789] Call trace: [ 59.395167] dump_backtrace+0xa0/0x128 [ 59.395733] show_stack+0x20/0x38 [ 59.396238] dump_stack_lvl+0xe8/0x148 [ 59.396806] print_report+0x37c/0x5e0 [ 59.397358] kasan_report+0xac/0xf8 [ 59.397885] kasan_check_range+0xe8/0x190 [ 59.398485] asan_memcpy+0x3c/0x98 [ 59.399022] mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm] [ 59.399928] mt8365_dai_i2s_register+0x1e8/0x2b0 [snd_soc_mt8365_pcm] [ 59.400893] mt8365_afe_pcm_dev_probe+0x4d0/0xdf0 [snd_soc_mt8365_pcm] [ 59.401873] platform_probe+0xcc/0x228 [ 59.402442] really_probe+0x340/0x9e8 [ 59.402992] driver_probe_device+0x16c/0x3f8 [ 59.403638] driver_probe_device+0x64/0x1d8 [ 59.404256] driver_attach+0x1dc/0x4c8 [ 59.404840] bus_for_each_dev+0x100/0x190 [ 59.405442] driver_attach+0x44/0x68 [ 59.405980] bus_add_driver+0x23c/0x500 [ 59.406550] driver_register+0xf8/0x3d0 [ 59.407122] platform_driver_register+0x68/0x98 [ 59.407810] mt8365_afe_pcm_driver_init+0x2c/0xff8 [snd_soc_mt8365_pcm]

In the Linux kernel, the following vulnerability has been resolved: fuse: fix runtime warning on truncate_folio_batch_exceptionals() The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80afcfa6 ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]---

IBM CICS TX Standard 11.1 and IBM CICS TX Advanced 10.1 and 11.1 could allow a local user to execute arbitrary code on the system due to failure to handle DNS return requests by the gethostbyaddr function.

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6 index -84 is out of range for type 's8[341]' (aka 'signed char[341]') CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAllocDmapLev+0x3e5/0x430 fs/jfs/jfs_dmap.c:1965 dbAllocCtl+0x113/0x920 fs/jfs/jfs_dmap.c:1809 dbAllocAG+0x28f/0x10b0 fs/jfs/jfs_dmap.c:1350 dbAlloc+0x658/0xca0 fs/jfs/jfs_dmap.c:874 dtSplitUp fs/jfs/jfs_dtree.c:974 [inline] dtInsert+0xda7/0x6b00 fs/jfs/jfs_dtree.c:863 jfs_create+0x7b6/0xbb0 fs/jfs/namei.c:137 lookup_open fs/namei.c:3492 [inline] open_last_lookups fs/namei.c:3560 [inline] path_openat+0x13df/0x3170 fs/namei.c:3788 do_filp_open+0x234/0x490 fs/namei.c:3818 do_sys_openat2+0x13f/0x500 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_openat fs/open.c:1388 [inline] __se_sys_openat fs/open.c:1383 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1383 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1f4e33f7e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc21129578 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f4e33f7e9 RDX: 000000000000275a RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f1f4e2ff080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1f4e2ff110 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The bug occurs when the dbAllocDmapLev()function attempts to access dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative. To rectify this, the patch introduces a safeguard within the dbAllocDmapLev() function. A check has been added to verify if leafidx is negative. If it is, the function immediately returns an I/O error, preventing any further execution that could potentially cause harm. Tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() The function mpi3mr_get_all_tgt_info() has four issues: 1) It calculates valid entry length in alltgt_info assuming the header part of the struct mpi3mr_device_map_info would equal to sizeof(u32). The correct size is sizeof(u64). 2) When it calculates the valid entry length kern_entrylen, it excludes one entry by subtracting 1 from num_devices. 3) It copies num_device by calling memcpy(). Substitution is enough. 4) It does not specify the calculated length to sg_copy_from_buffer(). Instead, it specifies the payload length which is larger than the alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds". Fix the issues by using the correct header size, removing the subtraction from num_devices, replacing the memcpy() with substitution and specifying the correct length to sg_copy_from_buffer().

arch/x86/kernel/entry_64.S in the Linux kernel before 3.17.5 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to gain privileges by triggering an IRET instruction that leads to access to a GS Base address from the wrong space.

IBM CICS TX Standard 11.1 and IBM CICS TX Advanced 10.1 and 11.1  could allow a local user to execute arbitrary code on the system due to failure to handle DNS return requests by the gethostbyname function.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Don't balance task to its current running CPU We've run into the case that the balancer tries to balance a migration disabled task and trigger the warning in set_task_cpu() like below: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240 Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip> CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021 pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : set_task_cpu+0x188/0x240 lr : load_balance+0x5d0/0xc60 sp : ffff80000803bc70 x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040 x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001 x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78 x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000 x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530 x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001 Call trace: set_task_cpu+0x188/0x240 load_balance+0x5d0/0xc60 rebalance_domains+0x26c/0x380 _nohz_idle_balance.isra.0+0x1e0/0x370 run_rebalance_domains+0x6c/0x80 __do_softirq+0x128/0x3d8 ____do_softirq+0x18/0x24 call_on_irq_stack+0x2c/0x38 do_softirq_own_stack+0x24/0x3c __irq_exit_rcu+0xcc/0xf4 irq_exit_rcu+0x18/0x24 el1_interrupt+0x4c/0xe4 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x18/0x4c default_idle_call+0x58/0x194 do_idle+0x244/0x2b0 cpu_startup_entry+0x30/0x3c secondary_start_kernel+0x14c/0x190 __secondary_switched+0xb0/0xb4 ---[ end trace 0000000000000000 ]--- Further investigation shows that the warning is superfluous, the migration disabled task is just going to be migrated to its current running CPU. This is because that on load balance if the dst_cpu is not allowed by the task, we'll re-select a new_dst_cpu as a candidate. If no task can be balanced to dst_cpu we'll try to balance the task to the new_dst_cpu instead. In this case when the migration disabled task is not on CPU it only allows to run on its current CPU, load balance will select its current CPU as new_dst_cpu and later triggers the warning above. The new_dst_cpu is chosen from the env->dst_grpmask. Currently it contains CPUs in sched_group_span() and if we have overlapped groups it's possible to run into this case. This patch makes env->dst_grpmask of group_balance_mask() which exclude any CPUs from the busiest group and solve the issue. For balancing in a domain with no overlapped groups the behaviour keeps same as before.

Improper Privilege Management vulnerability in AlgoSec Firewall Analyzer on Linux, 64 bit allows Privilege Escalation, Parameter Injection. A local user with access to the command line may escalate their privileges by abusing the parameters of a command that is approved in the sudoers file.  This issue affects Firewall Analyzer: A33.0, A33.10.

A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat.

There is heap-based buffer overflow in Linux kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.

A vulnerability was found in Linux Kernel, where a Heap Overflow was found in mwifiex_set_wmm_params() function of Marvell Wifi Driver.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

Insufficient input validation in Intel(R) SGX SDK multiple Linux and Windows versions may allow an authenticated user to enable information disclosure, escalation of privilege or denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix clobbered r15 during livepatching While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is not restored in livepatch sequence leading to not so obvious fails like below: BUG: Unable to handle kernel data access on write at 0xc0000000000f9078 Faulting instruction address: 0xc0000000018ff958 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790 REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000 CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1 GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488 GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000 GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070 GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88 GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000 GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078 ... Call Trace: check_heap_object+0x34/0x390 (unreliable) __mutex_unlock_slowpath.isra.0+0xe4/0x230 seq_read_iter+0x430/0xa90 proc_reg_read_iter+0xa4/0x200 vfs_read+0x41c/0x510 ksys_read+0xa4/0x190 system_call_exception+0x1d0/0x440 system_call_vectored_common+0x15c/0x2ec Fix it by restoring r15 always.

Insufficient initialization in Intel(R) SGX SDK Windows versions 2.4.100.51291 and earlier, and Linux versions 2.6.100.51363 and earlier, may allow an authenticated user to enable information disclosure, escalation of privilege or denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a race condition between btf_put() and map_free() When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem ---truncated---

In the Linux Kernel before versions 4.20.8 and 4.19.21 a use-after-free error in the "sctp_sendmsg()" function (net/sctp/socket.c) when handling SCTP_SENDALL flag can be exploited to corrupt memory.

An integer coercion error was found in the openvswitch kernel module. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, the reserve_sfa_size() function does not return -EMSGSIZE as expected, potentially leading to an out-of-bounds write access. This flaw allows a local user to crash or potentially escalate their privileges on the system.

st21nfca_connectivity_event_received in drivers/nfc/st21nfca/se.c in the Linux kernel through 5.16.12 has EVT_TRANSACTION buffer overflows because of untrusted length parameters.

In the Linux kernel through 4.20.11, af_alg_release() in crypto/af_alg.c neglects to set a NULL value for a certain structure member, which leads to a use-after-free in sockfs_setattr.

It was discovered that the cls_route filter implementation in the Linux kernel would not remove an old filter from the hashtable before freeing it if its handle had the value 0.

i915_gem_userptr_get_pages in drivers/gpu/drm/i915/i915_gem_userptr.c in the Linux kernel 4.15.0 on Ubuntu 18.04.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) or possibly have unspecified other impact via crafted ioctl calls to /dev/dri/card0.

It was discovered that when exec'ing from a non-leader thread, armed POSIX CPU timers would be left on a list but freed, leading to a use-after-free.

A null pointer dereference flaw was found in the hugetlbfs_fill_super function in the Linux kernel hugetlbfs (HugeTLB pages) functionality. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.

A memory leak flaw was found in the Linux kernel’s io_uring functionality in how a user registers a buffer ring with IORING_REGISTER_PBUF_RING, mmap() it, and then frees it. This flaw allows a local user to crash or potentially escalate their privileges on the system.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

It was discovered that a nft object or expression could reference a nft set on a different nft table, leading to a use-after-free once that table was deleted.

A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where a user can cause an untrusted pointer dereference by executing a driver API. A successful exploit of this vulnerability might lead to denial of service, information disclosure, and data tampering.

In Qt 5.9.x through 5.15.x before 5.15.9 and 6.x before 6.2.4 on Linux and UNIX, QProcess could execute a binary from the current working directory when not found in the PATH.

In the Linux kernel, the following vulnerability has been resolved: spi: Fix use-after-free with devm_spi_alloc_* We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98) [<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24) r4:b6700140 [<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40) [<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup.

In the Linux kernel, the following vulnerability has been resolved: smackfs: restrict bytes count in smk_set_cipso() Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login().

In sk_clone_lock of sock.c, there is a possible memory corruption due to type confusion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-113509306. References: Upstream kernel.

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock.

Buffer overflow in i40e driver for Intel(R) Ethernet 700 Series Controllers versions before 7.0 may allow an authenticated user to potentially enable an escalation of privilege via local access.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859