upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.
Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/exeCommand.
A Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in wrangler of SUSE Rancher allows remote attackers to inject commands in the underlying host via crafted commands passed to Wrangler. This issue affects: SUSE Rancher wrangler version 0.7.3 and prior versions; wrangler version 0.8.4 and prior versions; wrangler version 1.0.0 and prior versions.
pfSense pfBlockerNG through 2.1.4_26 allows remote attackers to execute arbitrary OS commands as root via shell metacharacters in the HTTP Host header. NOTE: 3.x is unaffected.
Nortek Linear eMerge E3-Series devices before 0.32-08f allow an unauthenticated attacker to inject OS commands via ReaderNo. NOTE: this issue exists because of an incomplete fix for CVE-2019-7256.
Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.
SmartFabric storage software version 1.0.0 contains a Command-Injection vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access and perform actions on the affected system.
An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.
Tenda AC10 US_AC10V1.0RTL_V15.03.06.26_multi_TD01 was discovered to contain a remote code execution (RCE) vulnerability via the lanIp parameter.
IBM CICS TX Standard and Advanced 11.1 could allow a remote attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 227980.
An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request.
Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where a specific function does not sanitize the input provided by the user, which may expose the affected to an OS command injection vulnerability.
D-Link DIR-645 v1.03 was discovered to contain a command injection vulnerability via the QUERY_STRING parameter at __ajax_explorer.sgi.
An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.
An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the grel_finfo function in grel.php. An attacker is able to influence the username (user), password (pw), and file-name (file) parameters and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.
An unauthenticated attacker can update the hostname with a specially crafted name that will allow for shell commands to be executed during the core collection process. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.302 for the LP series and 1.296 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable. The injected commands only get executed during start up or when unsafe calls regarding the hostname are used. This allows the attacker to gain remote access to the device and can make their persistence permanent by modifying the filesystem.
Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 6.1.1.0 are subject to a remote code execution vulnerability. System commands can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Attackers need not be authenticated to exploit this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability.
A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.
An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.
A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument setIptvCfg results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
GNOME OCRFeeder before 0.8.4 allows OS command injection via shell metacharacters in a PDF or image filename.
NewSoftOA developed by NewSoft has an OS Command Injection vulnerability, allowing unauthenticated local attackers to inject arbitrary OS commands and execute them on the server.
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
A remote code execution vulnerability in the installUpdateThemePluginAction function in index.php in WonderCMS 3.1.3, allows remote attackers to upload a custom plugin which can contain arbitrary code and obtain a webshell via the theme/plugin installer.
A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setStorageCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sambaEnabled results in os command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.
A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.
A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. This issue affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enable can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.
A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.
OS Command Injection vulnerability in NEC Platforms, Ltd. Aterm Series allows a attacker to execute arbitrary OS commands via network.
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
Spryker Commerce OS 1.4.2 allows Remote Command Execution.
TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the webwlanidx parameter in /setting/setWebWlanIdx.
TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.
A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.
A command injection vulnerability in the DDNS service configuration of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to execute code in the context of the root user.
TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicename parameter in /setting/setDeviceName.
TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicemac parameter in /setting/setDeviceName.
A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.8 may allow attacker to execute unauthorized code or commands via <insert attack vector here>
documentconverter in OX App Suite through 7.10.6, in a non-default configuration with ghostscript, allows OS Command Injection because file conversion may occur for an EPS document that is disguised as a PDF document.
A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.
A command injection in the command parameter of Razer Sila Gaming Router v2.0.441_api-2.0.418 allows attackers to execute arbitrary commands via a crafted POST request.
A command injection vulnerability in the component /setnetworksettings/IPAddress of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.
A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.
A command injection vulnerability has been found on D-Link DIR-823G devices with firmware version 1.02B03 that allows an attacker to execute arbitrary operating system commands through well-designed /HNAP1 requests. Before the HNAP API function can process the request, the system function executes an untrusted command that triggers the vulnerability.
A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.
The web console of FUJITSU Network IPCOM series (IPCOM EX2 IN(3200, 3500), IPCOM EX2 LB(1100, 3200, 3500), IPCOM EX2 SC(1100, 3200, 3500), IPCOM EX2 NW(1100, 3200, 3500), IPCOM EX2 DC, IPCOM EX2 DC, IPCOM EX IN(2300, 2500, 2700), IPCOM EX LB(1100, 1300, 2300, 2500, 2700), IPCOM EX SC(1100, 1300, 2300, 2500, 2700), and IPCOM EX NW(1100, 1300, 2300, 2500, 2700)) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.
In Carlo Gavazzi UWP3.0 in multiple versions and CPY Car Park Server in Version 2.8.3 a remote, unauthenticated attacker could utilize an improper input validation on an API-submitted parameter to execute arbitrary OS commands.
PraisonAI is a multi-agent teams system. In versions below 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents, the workflow engine is vulnerable to arbitrary command and code execution through untrusted YAML files. When praisonai workflow run <file.yaml> loads a YAML file with type: job, the JobWorkflowExecutor in job_workflow.py processes steps that support run: (shell commands via subprocess.run()), script: (inline Python via exec()), and python: (arbitrary Python script execution)—all without any validation, sandboxing, or user confirmation. The affected code paths include action_run() in workflow.py and _exec_shell(), _exec_inline_python(), and _exec_python_script() in job_workflow.py. An attacker who can supply or influence a workflow YAML file (particularly in CI pipelines, shared repositories, or multi-tenant deployment environments) can achieve full arbitrary command execution on the host system, compromising the machine and any accessible data or credentials. This issue has been fixed in versions 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents.