Addressed remote code execution vulnerability in DsdkProxy.php due to insufficient sanitization and insufficient validation of user input in Western Digital My Cloud NAS devices prior to 5.04.114

An issue was discovered on Western Digital My Cloud NAS devices before 5.04.114. They allow remote code execution with resultant escalation of privileges.

Addressed remote code execution vulnerability in cgi_api.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114.

Addressed remote code execution vulnerability in reg_device.php due to insufficient validation of user input.in Western Digital My Cloud Devices prior to 5.4.1140.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that was caused by a command that read files from a privileged location and created a system command without sanitizing the read data. This command could be triggered by an attacker remotely to cause code execution and gain a reverse shell in Western Digital My Cloud OS 5 devices.This issue affects My Cloud OS 5: before 5.26.119.

Addressed a remote code execution vulnerability by resolving a command injection vulnerability and closing an AWS S3 bucket that potentially allowed an attacker to execute unsigned code on My Cloud Home devices.

On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.)

A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.

Addressed remote code execution vulnerability in AvailableApps.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114 (issue 3 of 3).

Addressed multiple stack buffer overflow vulnerabilities that could allow an attacker to carry out escalation of privileges through unauthorized remote code execution in Western Digital My Cloud devices before 5.04.114.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.

An authentication bypass issue via spoofing was discovered in the token-based authentication mechanism that could allow an attacker to carry out an impersonation attack. This issue affects My Cloud OS 5 devices: before 5.26.202.

Western Digital WD My Book World through II 1.02.12 suffers from Broken Authentication, which allows an attacker to access the /admin/ directory without credentials. An attacker can easily enable SSH from /admin/system_advanced.php?lang=en and login with the default root password welc0me.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could allow an attacker to write files to locations with certain critical filesystem types leading to remote code execution was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This issue requires an authentication bypass issue to be triggered before this can be exploited.  This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202.

A vulnerability in the FTP service of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to read and write arbitrary files. This could lead to a full NAS compromise and would give remote execution capabilities to the attacker.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119.

My Cloud OS 5 was vulnerable to a pre-authenticated stack overflow vulnerability on the FTP service that could be exploited by unauthenticated attackers on the network. Addressed the vulnerability by adding defenses against stack overflow issues.

The combination of primitives offered by SMB and AFP in their default configuration allows the arbitrary writing of files. By exploiting these combination of primitives, an attacker can execute arbitrary code.

A command injection remote code execution vulnerability was discovered on Western Digital My Cloud Devices that could allow an attacker to execute arbitrary system commands on the device. The vulnerability was addressed by escaping individual arguments to shell functions coming from user input.

An OS command injection vulnerability in user interface in Western Digital My Cloud firmware prior to 5.31.108 on NAS platforms allows remote attackers to execute arbitrary system commands via a specially crafted HTTP POST.

A malicious user on the same LAN could use DNS spoofing followed by a command injection attack to trick a NAS device into loading through an unsecured HTTP call. Addressed this vulnerability by disabling checks for internet connectivity using HTTP.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

Post-authentication remote command injection vulnerability in Western Digital My Cloud OS 5 devices that could allow an attacker to execute code in the context of the root user on vulnerable CGI files. This vulnerability can only be exploited over the network and the attacker must already have admin/root privileges to carry out the exploit. An authentication bypass is required for this exploit, thereby making it more complex. The attack may not require user interaction. Since an attacker must already be authenticated, the confidentiality impact is low while the integrity and availability impact is high.  This issue affects My Cloud OS 5 devices: before 5.26.300.

An issue was discovered on Fastweb Askey RTV1907VW 0.00.81_FW_200_Askey 2018-10-02 18:08:18 devices. By using the usb_remove service through an HTTP request, it is possible to inject and execute a command between two & characters in the mount parameter.

In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

APKLeaks is an open-source project for scanning APK file for URIs, endpoints & secrets. APKLeaks prior to v2.0.3 allows remote attackers to execute arbitrary OS commands via package name inside application manifest. An attacker could include arguments that allow unintended commands or code to be executed, allow sensitive data to be read or modified or could cause other unintended behavior through malicious package name. The problem is fixed in version v2.0.6-dev and above.

MyBuilder viewer before 6.2.2019.814 allow an attacker to execute arbitrary command via specifically crafted configuration file. This can be leveraged for code execution.

An issue was found on TRENDnet TEW-831DR 1.0 601.130.1.1356 devices. An OS injection vulnerability exists within the web interface, allowing an attacker with valid credentials to execute arbitrary shell commands.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/dgUpload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

resi-calltrace in RESI Gemini-Net 4.2 is affected by OS Command Injection. It does not properly check the parameters sent as input before they are processed on the server. Due to the lack of validation of user input, an unauthenticated attacker can bypass the syntax intended by the software (e.g., concatenate `&|;\r\ commands) and inject arbitrary system commands with the privileges of the application user.

ActiveX Control in MyBuilder before 6.2.2019.814 allow an attacker to execute arbitrary command via the ShellOpen method. This can be leveraged for code execution

Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 does not property sanitize user-controlled parameters within the crtcswitchsimprofile function of the crtcrpc JSON listener. A remote attacker on the local network can inject shell metacharacters into /usr/lib/lua/5.1/luci/controller/rpc.lua to achieve remote code execution as root,

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.

It is found that there is a command injection vulnerability in the setopenvpnclientcfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows attackers to execute arbitrary commands through a carefully constructed payload

Verizon 5G Home LVSKIHP InDoorUnit (IDU) 3.4.66.162 does not properly sanitize user-controlled parameters within the crtcreadpartition function of the crtcrpc JSON listener in /usr/lib/lua/luci/crtc.lua. A remote attacker on the local network can inject shell metacharacters to achieve remote code execution as root.

SolarView Compact ver.6.00 was discovered to contain a command injection vulnerability via conf_mail.php.

Compal CH7465LG CH7465LG-NCIP-6.12.18.24-5p8-NOSH devices have Incorrect Access Control because of Improper Input Validation. The attacker can send a maliciously modified POST (HTTP) request containing shell commands, which will be executed on the device, to an backend API endpoint of the cable modem.

The npm-dependency-versions package through 0.3.0 for Node.js allows command injection if an attacker is able to call dependencyVersions with a JSON object in which pkgs is a key, and there are shell metacharacters in a value.