A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A command injection vulnerability in the hostTime parameter in the function NTPSyncWithHostof TOTOLINK CP300+ V5.2cu.7594_B20200910 allows attackers to execute arbitrary commands via a crafted http packet.

There is a command injection vulnerability in the adslr VW2100 router with firmware version M1DV1.0. An unauthenticated attacker can exploit the vulnerability to execute system commands as the root user.

SeaCMS <=13.0 is vulnerable to command execution in phome.php via the function Ebak_RepPathFiletext().

SNMP objects in NET-SNMP used in ORing IAP-420 allows Command Injection. This issue affects IAP-420: through 2.01e.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setPptpServerCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

TOTOLINK X18 v9.1.0cu.2024_B20220329 has an unauthorized arbitrary command execution in the enable parameter' of the sub_41105C function of cstecgi .cgi.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

Linksys E5600 V1.1.0.26 is vulnerable to command injection in the runtime.macClone function via the mc.ip parameter.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mode causes os command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows unauthenticated remote code execution via an XML document.

In ProLink PRC2402M V1.0.18 and older, the set_ledonoff function in the adm.cgi binary, accessible with a page parameter value of ledonoff contains a trivial command injection where the value of the led_cmd parameter is passed directly to do_system.

Command Injection vulnerability in MagnusSolution magnusbilling 6.x and 7.x allows remote attackers to run arbitrary commands via unauthenticated HTTP request.

An issue in BL-AC2100 V1.0.4 and before allows a remote attacker to execute arbitrary code via the enable parameter passed to /goform/set_hidessid_cfg is not handled properly.

Code Injection vulnerability in EasyVirt DCScope <= 8.6.0 and CO2Scope <= 1.3.0 allows remote unauthenticated attackers to execute arbitrary code to /api/license/sendlicense/.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the command parameter in the setTracerouteCfg function.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setVpnAccountCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument User leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

huedawn-tesseract 0.3.3 and dawnsparks-node-tesseract 0.4.0 to 0.4.1 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

In Cleo Harmony before 5.8.0.24, VLTrader before 5.8.0.24, and LexiCom before 5.8.0.24, an unauthenticated user can import and execute arbitrary Bash or PowerShell commands on the host system by leveraging the default settings of the Autorun directory.

An issue in BL-AC2100 <=V1.0.4 allows a remote attacker to execute arbitrary code via the time1 and time2 parameters in the set_LimitClient_cfg of the goahead webservice.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the FileName parameter in the UploadFirmwareFile function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the hostname parameter in the setOpModeCfg function.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tty_server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

An issue was discovered in Anyka Microelectronics AK3918EV300 MCU v18. A command injection vulnerability in the network configuration script within the MCU's operating system allows attackers to perform arbitrary command execution via a crafted wifi SSID or password.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

A vulnerability classified as critical was found in AMTT Hotel Broadband Operation System 1.0. This vulnerability affects the function popen of the file /manager/network/port_setup.php. The manipulation of the argument SwitchVersion/SwitchWrite/SwitchIP/SwitchIndex/SwitchState leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

fs-path node module before 0.0.25 is vulnerable to command injection by way of user-supplied inputs via the `copy`, `copySync`, `remove`, and `removeSync` methods.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.

Jenkins Convert To Pipeline Plugin 1.0 and earlier uses basic string concatenation to convert Freestyle projects' Build Environment, Build Steps, and Post-build Actions to the equivalent Pipeline step invocations, allowing attackers able to configure Freestyle projects to prepare a crafted configuration that injects Pipeline script code into the (unsandboxed) Pipeline resulting from a convertion by Jenkins Convert To Pipeline Plugin.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Impacted is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument lan_info can lead to os command injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wanIdx leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A remote command injection vulnerability exists in the Barracuda Email Security Gateway (appliance form factor only) product effecting versions 5.1.3.001-9.2.0.006. The vulnerability arises out of a failure to comprehensively sanitize the processing of .tar file (tape archives). The vulnerability stems from incomplete input validation of a user-supplied .tar file as it pertains to the names of the files contained within the archive. As a consequence, a remote attacker can specifically format these file names in a particular manner that will result in remotely executing a system command through Perl's qx operator with the privileges of the Email Security Gateway product. This issue was fixed as part of BNSF-36456 patch. This patch was automatically applied to all customer appliances.

An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network. Affected Products: UniFi Access Reader Pro (Version 2.14.21 and earlier) UniFi Access G2 Reader Pro (Version 1.10.32 and earlier) UniFi Access G3 Reader Pro (Version 1.10.30 and earlier) UniFi Access Intercom (Version 1.7.28 and earlier) UniFi Access G3 Intercom (Version 1.7.29 and earlier) UniFi Access Intercom Viewer (Version 1.3.20 and earlier) Mitigation: Update UniFi Access Reader Pro Version 2.15.9 or later Update UniFi Access G2 Reader Pro Version 1.11.23 or later Update UniFi Access G3 Reader Pro Version 1.11.22 or later Update UniFi Access Intercom Version 1.8.22 or later Update UniFi Access G3 Intercom Version 1.8.22 or later Update UniFi Access Intercom Viewer Version 1.4.39 or later

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). Affected devices are vulnerable to command injection via the web server port 443/tcp, if the parameter “Remote Operation” is enabled. The parameter is disabled by default. The vulnerability could allow an unauthenticated remote attacker to perform arbitrary code execution on the device.

The flash_tool gem through 0.6.0 for Ruby allows command execution via shell metacharacters in the name of a downloaded file.

GreenPacket OH736's WR-1200 Indoor Unit, OT-235 with firmware versions M-IDU-1.6.0.3_V1.1 and MH-46360-2.0.3-R5-GP respectively are vulnerable to remote command injection. Commands are executed using pre-login execution and executed with root privileges allowing complete takeover.

rails-routes-to-json v1.0.0 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

A vulnerability was found in Caton Live up to 2023-04-26 and classified as critical. This issue affects some unknown processing of the file /cgi-bin/ping.cgi of the component Mini_HTTPD. The manipulation of the argument address with the input ;id;uname${IFS}-a leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-228911. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

broccoli-compass v0.2.4 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.