A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.0.28 and earlier) allows a malicious actor with UniFi Network Application Administrator credentials to escalate privileges to root on the host device. Affected Products: UniFi Network Application (Version 8.0.28 and earlier) . Mitigation: Update UniFi Network Application to Version 8.1.113 or later.

A command injection vulnerability in the DHCP Client function of all UniFi Access Points and Switches, excluding the Switch Flex Mini, could allow a Remote Code Execution (RCE). Affected Products: All UniFi Access Points (Version 6.5.53 and earlier) All UniFi Switches (Version 6.5.32 and earlier) -USW Flex Mini excluded. Mitigation: Update UniFi Access Points to Version 6.5.62 or later. Update UniFi Switches to Version 6.5.59 or later.

Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite. Affected Products: UniFi Connect EV Station Lite (Version 1.5.1 and earlier) Mitigation: Update UniFi Connect EV Station Lite to Version 1.5.2 or later

An integer overflow vulnerability in all UniFi Access Points and Switches, excluding the Switch Flex Mini, with SNMP Monitoring and default settings enabled could allow a Remote Code Execution (RCE). Affected Products: All UniFi Access Points (Version 6.5.50 and earlier) All UniFi Switches (Version 6.5.32 and earlier) -USW Flex Mini excluded. Mitigation: Update UniFi Access Points to Version 6.5.62 or later. Update the UniFi Switches to Version 6.5.59 or later.

A Missing Authentication for Critical Function vulnerability in the UniFi Connect EV Station Pro may allow a malicious actor with physical or adjacent access to perform an unauthorized factory reset. Affected Products: UniFi Connect EV Station Pro (Version 1.5.18 and earlier) Mitigation: Update UniFi Connect EV Station Pro to Version 1.5.27 or later

A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.3.32 and earlier) allows a malicious actor with unifi user shell access to escalate privileges to root on the host device.

A malformed discovery packet sent by a malicious actor with preexisting access to the network could interrupt the functionality of device management and discovery. Affected Products: UniFi Access Points UniFi Switches UniFi LTE Backup UniFi Express (Only Mesh Mode, Router mode is not affected) Mitigation: Update UniFi Access Points to Version 6.6.55 or later. Update UniFi Switches to Version 6.6.61 or later. Update UniFi LTE Backup to Version 6.6.57 or later. Update UniFi Express to Version 3.2.5 or later.

A malicious actor in Wi-Fi range of the affected product could leverage a vulnerability in the airMAX Wireless Protocol to achieve a remote code execution (RCE) within the affected product. Affected Products: airMAX AC (Version 8.7.20 and earlier) airMAX M (Version 6.3.22 and earlier) airFiber AF60-XG (Version 1.2.2 and earlier) airFiber AF60 (Version 2.6.7 and earlier) Mitigation: Update your airMAX AC to Version 8.7.21 or later. Update your airMAX M to Version 6.3.24 or later. Update your airFiber AF60-XG to Version 1.2.3 or later. Update your airFiber AF60 to Version 2.6.8 or later.

A malicious actor in Wi-Fi range of the affected product could leverage a vulnerability in the airMAX Wireless Protocol to achieve a remote code execution (RCE) within the affected product. Affected Products: UBB-XG (Version 1.2.2 and earlier) UDB-Pro/UDB-Pro-Sector (Version 1.4.1 and earlier) UBB (Version 3.1.5 and earlier) Mitigation: Update your UBB-XG to Version 1.2.3 or later. Update your UDB-Pro/UDB-Pro-Sector to Version 1.4.2 or later. Update your UBB to Version 3.1.7 or later.

An Improper Input Validation in UISP Application could allow a Command Injection by a malicious actor with High Privileges and local access.

An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network. Affected Products: EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) Mitigation: Update the EdgeMAX EdgeSwitch to Version 1.11.1 or later.

An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.10.4 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network.

An Improper Neutralization of Escape Sequences vulnerability could allow an Authentication Bypass with a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras adjacent network.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ruequest_certificate function.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Microchip Technology (Microsemi) SyncServer S650 was discovered to contain a command injection vulnerability.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. xmldom parses XML that is not well-formed because it contains multiple top level elements, and adds all root nodes to the `childNodes` collection of the `Document`, without reporting any error or throwing. This breaks the assumption that there is only a single root node in the tree, which led to issuance of CVE-2022-39299 as it is a potential issue for dependents. Update to @xmldom/xmldom@~0.7.7, @xmldom/xmldom@~0.8.4 (dist-tag latest) or @xmldom/xmldom@>=0.9.0-beta.4 (dist-tag next). As a workaround, please one of the following approaches depending on your use case: instead of searching for elements in the whole DOM, only search in the `documentElement`or reject a document with a document that has more then 1 `childNode`.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Dataease is an open source data visualization analysis tool. Dataease prior to 1.15.2 has a deserialization vulnerability. In Dataease, the Mysql data source in the data source function can customize the JDBC connection parameters and the Mysql server target to be connected. In `backend/src/main/java/io/dataease/provider/datasource/JdbcProvider.java`, the `MysqlConfiguration` class does not filter any parameters. If an attacker adds some parameters to a JDBC url and connects to a malicious mysql server, the attacker can trigger the mysql jdbc deserialization vulnerability. Through the deserialization vulnerability, the attacker can execute system commands and obtain server privileges. Version 1.15.2 contains a patch for this issue.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

An OS command injection vulnerability has been reported to affect several product versions. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.3.103 and later

ChangingTech MegaServiSignAdapter component has a vulnerability of improper input validation. An unauthenticated remote attacker can exploit this vulnerability to access and modify HKEY_CURRENT_USER subkey (ex: AutoRUN) in Registry where malicious scripts can be executed to take control of the system or to terminate the service.

This vulnerable is about a potential code injection when an attacker has control of the target LDAP server using in the JDBC JNDI URL. The function jaas.modules.src.main.java.porg.apache.karaf.jass.modules.jdbc.JDBCUtils#doCreateDatasource use InitialContext.lookup(jndiName) without filtering. An user can modify `options.put(JDBCUtils.DATASOURCE, "osgi:" + DataSource.class.getName());` to `options.put(JDBCUtils.DATASOURCE,"jndi:rmi://x.x.x.x:xxxx/Command");` in JdbcLoginModuleTest#setup. This is vulnerable to a remote code execution (RCE) attack when a configuration uses a JNDI LDAP data source URI when an attacker has control of the target LDAP server.This issue affects all versions of Apache Karaf up to 4.4.1 and 4.3.7. We encourage the users to upgrade to Apache Karaf at least 4.4.2 or 4.3.8

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Tenda i9 v1.0.0.8(3828) was discovered to contain a command injection vulnerability via the FormexeCommand function.

There is a command injection vulnerability in ZTE MF286R, Due to insufficient validation of the input parameters, an attacker could use the vulnerability to execute arbitrary commands.

QVidium Technologies Amino A140 (prior to firmware version 1.0.0-283) was discovered to contain a command injection vulnerability.

Possible buffer overflow due to lack of parameter length check during MBSSID scan IE parse in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the setup_cacertificate function.

isolated-vm is a library for nodejs which gives the user access to v8's Isolate interface. In versions 4.3.6 and prior, if the untrusted v8 cached data is passed to the API through CachedDataOptions, attackers can bypass the sandbox and run arbitrary code in the nodejs process. Version 4.3.7 changes the documentation to warn users that they should not accept `cachedData` payloads from a user.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

NuProcess is an external process execution implementation for Java. In all the versions of NuProcess where it forks processes by using the JVM's Java_java_lang_UNIXProcess_forkAndExec method (1.2.0+), attackers can use NUL characters in their strings to perform command line injection. Java's ProcessBuilder isn't vulnerable because of a check in ProcessBuilder.start. NuProcess is missing that check. This vulnerability can only be exploited to inject command line arguments on Linux. Version 2.0.5 contains a patch. As a workaround, users of the library can sanitize command strings to remove NUL characters prior to passing them to NuProcess for execution.

An OS command injection vulnerability has been reported to affect HBS 3 Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 25.1.1.673 and later

A Command injection vulnerability in RaspAP 2.8.0 thru 2.8.7 allows unauthenticated attackers to execute arbitrary commands via the cfg_id parameter in /ajax/openvpn/activate_ovpncfg.php and /ajax/openvpn/del_ovpncfg.php.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in OpenNebula OpenNebula core on Linux allows Remote Code Inclusion.

An issue in Lens Visual integration with Power BI v.4.0.0.3 allows a remote attacker to execute arbitrary code via the Natural language processing component

An issue in DCME-320-L <=9.3.2.114 allows a remote attacker to execute arbitrary code via the log_u_umount.php component.

Nginx UI is a web user interface for the Nginx web server. Prior to version 2.0.0-beta.36, when Nginx UI configures logrotate, it does not verify the input and directly passes it to exec.Command, causing arbitrary command execution. Version 2.0.0-beta.36 fixes this issue.

A Command injection vulnerability in requestLetsEncryptSsl in NginxProxyManager 2.11.3 allows an attacker to RCE via Add Let's Encrypt Certificate.

CVE-2024-45824 IMPACT A remote code vulnerability exists in the affected products. The vulnerability occurs when chained with Path Traversal, Command Injection, and XSS Vulnerabilities and allows for full unauthenticated remote code execution. The link in the mitigations section below contains patches to fix this issue.