OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1040` performs `chan->width * chan->bytes_per_element` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other decoders by CVE-2026-34589/34588/34544, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1040`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, the DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.7, an attacker providing a crafted .exr file with HTJ2K compression and a channel width of 32768 can write controlled data beyond the output heap buffer in any application that decodes EXR images. The write primitive is 2 bytes per overflow iteration or 4 bytes (by another path), repeating for each additional pixel past the overflow point. In this context, a heap write overflow can lead to remote code execution on systems. This issue has been patched in version 3.4.7.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, a crafted B44 or B44A EXR file can cause an out-of-bounds write in any application that decodes it via exr_decoding_run(). Consequences range from immediate crash (most likely) to corruption of adjacent heap allocations (layout-dependent). This issue has been patched in version 3.4.8.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In CompositeDeepScanLine::readPixels, per-pixel totals are accumulated in vector<unsigned int> total_sizes for attacker-controlled large counts across many parts, total_sizes[ptr] wraps modulo 2^32. overall_sample_count is then derived from wrapped totals and used in samples[channel].resize(overall_sample_count). Decode pointer setup/consumption proceeds with true sample counts, and write operations in core unpack (generic_unpack_deep_pointers) overrun the undersized composite sample buffer. This vulnerability is fixed in v3.2.6, v3.3.8, and v3.4.6.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.3.2 through 3.3.0, there is a heap-based buffer overflow during a write operation when decompressing ZIPS-packed deep scan-line EXR files with a maliciously forged chunk header. This is fixed in version 3.3.3.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.4.0 to before 3.4.9, a missing bounds check on the dataWindow attribute in EXR file headers allows an attacker to trigger a signed integer overflow in generic_unpack(). By setting dataWindow.min.x to a large negative value, OpenEXRCore computes an enormous image width, which is later used in a signed integer multiplication that overflows, causing the process to terminate with SIGILL via UBSan. This vulnerability is fixed in 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. Versions 3.4.0 through 3.4.9 have a signed integer overflow vulnerability in OpenEXR's HTJ2K (High-Throughput JPEG 2000) decompression path. The `ht_undo_impl()` function in `src/lib/OpenEXRCore/internal_ht.cpp` accumulates a bytes-per-line value (`bpl`) using a 32-bit signed integer with no overflow guard. A crafted EXR file with 16,385 FLOAT channels at the HTJ2K maximum width of 32,767 causes `bpl` to overflow `INT_MAX`, producing undefined behavior confirmed by UBSan. On an allocator-permissive host where the required ~64 GB allocation succeeds, the wrapped negative `bpl` value would subsequently be used as a per-scanline pointer advance, which would produce a heap out-of-bounds write. On a memory-constrained host, the allocation fails before `ht_undo_impl()` is entered. This is the second distinct integer overflow in `ht_undo_impl()`. CVE-2026-34545 addressed a different overflow in the same function — the `int16_t p` pixel-loop counter at line ~302 that overflows when iterating over channels whose `width` exceeds 32,767. The CVE-2026-34545 fix did not touch the `int bpl` accumulator at line 211, which is the subject of this advisory. The `bpl` accumulator was also not addressed by any of the 8 advisories in the 2026-04-05 v3.4.9 release batch. This finding is structurally identical to CVE-2026-34588 (PIZ `wcount*nx` overflow in `internal_piz.c`) and should be remediated with the same pattern. The CVE-2026-34588 fix did not touch `internal_ht.cpp`. Version 3.4.10 contains a remediation that addresses the vulnerability in `internal_ht.cpp`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.1.0 to before 3.2.7, 3.3.9, and 3.4.9, internal_exr_undo_piz() advances the working wavelet pointer with signed 32-bit arithmetic. Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undo_pxr24_impl() in src/lib/OpenEXRCore/internal_pxr24.c at line 377. The expression (uint64_t)(w * 3) computes w * 3 as a signed 32-bit integer before casting to uint64_t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positive integer, which may allow the subsequent bounds check to pass incorrectly. If the check is bypassed, the decoding loop proceeds to write pixel data through dout, potentially extending far beyond the allocated output buffer. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

An issue was discovered in OpenEXR before 2.4.1. Because of integer overflows in CompositeDeepScanLine::Data::handleDeepFrameBuffer and readSampleCountForLineBlock, an attacker can write to an out-of-bounds pointer.

There's a flaw in OpenEXR's deep tile sample size calculations in versions before 3.0.0-beta. An attacker who is able to submit a crafted file to be processed by OpenEXR could trigger an integer overflow, subsequently leading to an out-of-bounds read. The greatest risk of this flaw is to application availability.

An issue in Academy Software Foundation openexr v.3.2.3 and before allows a local attacker to cause a denial of service (DoS) via the convert function of exrmultipart.cpp.

An integer overflow could occur when OpenEXR processes a crafted file on systems where size_t < 64 bits. This could cause an invalid bytesPerLine and maxBytesPerLine value, which could lead to problems with application stability or lead to other attack paths.

There is a flaw in OpenEXR in versions before 3.0.0-beta. An attacker who can submit a crafted file to be processed by OpenEXR could cause an integer overflow, potentially leading to problems with application availability.

A flaw was found in OpenEXR's B44 uncompression functionality in versions before 3.0.0-beta. An attacker who is able to submit a crafted file to OpenEXR could trigger shift overflows, potentially affecting application availability.

There's a flaw in OpenEXR in versions before 3.0.0-beta. A crafted input file that is processed by OpenEXR could cause a shift overflow in the FastHufDecoder, potentially leading to problems with application availability.

An integer overflow leading to a heap-buffer overflow was found in the DwaCompressor of OpenEXR in versions before 3.0.1. An attacker could use this flaw to crash an application compiled with OpenEXR. This is a different flaw from CVE-2021-23215.

An integer overflow leading to a heap-buffer overflow was found in OpenEXR in versions before 3.0.1. An attacker could use this flaw to crash an application compiled with OpenEXR.

An integer overflow leading to a heap-buffer overflow was found in the DwaCompressor of OpenEXR in versions before 3.0.1. An attacker could use this flaw to crash an application compiled with OpenEXR.

A flaw was found in OpenEXR's hufDecode functionality. This flaw allows an attacker who can pass a crafted file to be processed by OpenEXR, to trigger an undefined right shift error. The highest threat from this vulnerability is to system availability.

A flaw was found in OpenEXR's hufUncompress functionality in OpenEXR/IlmImf/ImfHuf.cpp. This flaw allows an attacker who can submit a crafted file that is processed by OpenEXR, to trigger an integer overflow. The highest threat from this vulnerability is to system availability.

A flaw found in function dataWindowForTile() of IlmImf/ImfTiledMisc.cpp. An attacker who is able to submit a crafted file to be processed by OpenEXR could trigger an integer overflow, leading to an out-of-bounds write on the heap. The greatest impact of this flaw is to application availability, with some potential impact to data integrity as well.

libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. Versions 1.8.7 and prior contain an integer overflow which leads to a heap buffer overflow via sixel_frame_convert_to_rgb888() in frame.c, where allocation size and pointer offset computations for palettised images (PAL1, PAL2, PAL4) are performed using int arithmetic before casting to size_t. For images whose pixel count exceeds INT_MAX / 4, the overflow produces an undersized heap allocation for the conversion buffer and a negative pointer offset for the normalization sub-buffer, after which sixel_helper_normalize_pixelformat() writes the full image data starting from the invalid pointer, causing massive heap corruption confirmed by ASAN. An attacker providing a specially crafted large palettised PNG can corrupt the heap of the victim process, resulting in a reliable crash and potential arbitrary code execution. This issue has been fixed in version 1.8.7-r1.

GPAC MP4box 2.1-DEV-rev574-g9d5bb184b is contains an Integer overflow vulnerability in gf_hevc_read_sps_bs_internal function of media_tools/av_parsers.c:8316