An OS command injection vulnerability exists due to incomplete validation of user-supplied input. Validation fails to enforce sufficient formatting rules, which could permit attackers to append arbitrary data. This could allow an unauthenticated attacker to inject arbitrary commands.

An OS command injection vulnerability exists due to insufficient sanitization of user-supplied input. The application accepts parameters that are later incorporated into OS commands without adequate validation. This could allow an unauthenticated attacker to execute arbitrary commands remotely.

A Path Traversal vulnerability in the Allsky WebUI version v2024.12.06_06 allows an unauthenticated remote attacker to achieve arbitrary command execution. By sending a crafted HTTP request to the /html/execute.php endpoint with a malicious payload in the id parameter, an attacker can execute arbitrary commands on the underlying operating system, leading to full remote code execution (RCE).

Snort Report versions < 1.3.2 contains a remote command execution vulnerability in the nmap.php and nbtscan.php scripts. These scripts fail to properly sanitize user input passed via the target GET parameter, allowing attackers to inject arbitrary shell commands. Exploitation requires no authentication and can result in full compromise of the underlying system.

An OS command injection vulnerability exists in the httpd iperfrun.cgi functionality of FreshTomato 2023.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

Unrestricted Upload of File with Dangerous Type, Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in SMG Software Information Portal allows Code Injection, Upload a Web Shell to a Web Server, Code Inclusion.This issue affects Information Portal: before 13.06.2025.

ContentKeeper Web Appliance (now maintained by Impero Software) versions prior to 125.10 are vulnerable to remote command execution due to insecure handling of file uploads via the mimencode CGI utility. The vulnerability allows unauthenticated attackers to upload and execute arbitrary scripts as the Apache user. Additionally, the exploit can optionally escalate privileges by abusing insecure PATH usage in the benetool binary, resulting in root-level access if successful.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in ZkTeco-based OEM devices allows OS Command Injection. Since all the found command implementations are executed from the superuser, their impact is the maximum possible. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly other.

A vulnerability has been identified in OZW672 (All versions < V8.0), OZW772 (All versions < V8.0). The web service in affected devices does not sanitize the input parameters required for the `exportDiagramPage` endpoint. This could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm  in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC.

An OS command injection vulnerability exists in EnGenius EnShare Cloud Service version 1.4.11 and earlier. The usbinteract.cgi script fails to properly sanitize user input passed to the path parameter, allowing unauthenticated remote attackers to inject arbitrary shell commands. The injected commands are executed with root privileges, leading to full system compromise. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-05 UTC.

An unauthenticated command injection vulnerability exists in stamparm/maltrail (Maltrail) versions <=0.54. A remote attacker can execute arbitrary operating system commands via the username parameter in a POST request to the /login endpoint. This occurs due to unsafe handling of user-supplied input passed to subprocess.check_output() in core/http.py, allowing injection of shell metacharacters. Exploitation does not require authentication and commands are executed with the privileges of the Maltrail process.

vm2 is an open source vm/sandbox for Node.js. In vm2 for versions up to and including 3.9.19, Node.js custom inspect function allows attackers to escape the sandbox and run arbitrary code. This may result in Remote Code Execution, assuming the attacker has arbitrary code execution primitive inside the context of vm2 sandbox. There are no patches and no known workarounds. Users are advised to find an alternative software.

A remote command injection vulnerability exists in Vacron Network Video Recorder (NVR) devices v1.4 due to improper input sanitization in the board.cgi script. The vulnerability allows unauthenticated attackers to pass arbitrary commands to the underlying operating system via crafted HTTP requests. These commands are executed with the privileges of the web server process, enabling remote code execution and potential full device compromise. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet allows attacker to execute unauthorized code or commands via crafted API requests.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote, unauthenticated attacker may use an attribute of a specific HTTP POST request releated to date/time operations to gain full access to the device.

A flaw was found in Samba, in the front-end WINS hook handling: NetBIOS names from registration packets are passed to a shell without proper validation or escaping. Unsanitized NetBIOS name data from WINS registration packets are inserted into a shell command and executed by the Samba Active Directory Domain Controller’s wins hook, allowing an unauthenticated network attacker to achieve remote command execution as the Samba process.

DELL EMC Avamar Server, versions 19.1, 19.2, 19.3, contain an OS Command Injection Vulnerability in Fitness Analyzer. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS with high privileges. This vulnerability is considered critical as it can be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

ssh2 is client and server modules written in pure JavaScript for node.js. In ssh2 before version 1.4.0 there is a command injection vulnerability. The issue only exists on Windows. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This is fixed in version 1.4.0.

Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above

An unauthenticated command injection vulnerability exists in AVTECH DVR devices via Search.cgi?action=cgi_query. The use of wget without input sanitization allows attackers to inject shell commands through the username or queryb64str parameters, executing commands as root. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-04 UTC.

OS Command Injection in GitHub repository sbs20/scanservjs prior to v2.27.0.

Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

An OS command injection vulnerability exists in the Chinese versions of Sangfor Endpoint Detection and Response (EDR) management platform versions 3.2.16, 3.2.17, and 3.2.19. The vulnerability allows unauthenticated attackers to construct and send malicious HTTP requests to the EDR Manager interface, leading to arbitrary command execution with elevated privileges. This flaw only affects the Chinese-language EDR builds. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC.

The device has two web servers that expose unauthenticated REST APIs on the management network (TCP ports 8084 and 8086). Exploiting OS command injection through these APIs, an attacker can send arbitrary commands that are executed with administrative permissions by the underlying operating system.

An OS command injection vulnerability exists in white-labeled DVRs manufactured by TVT, affecting a custom HTTP service called "Cross Web Server" that listens on TCP ports 81 and 82. The web interface fails to sanitize input in the URI path passed to the language extraction functionality. When the server processes a request to /language/[lang]/index.html, it uses the [lang] input unsafely in a tar extraction command without proper escaping. This allows an unauthenticated remote attacker to inject shell commands and achieve arbitrary command execution as root. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC.

AnyShare contains a critical unauthenticated remote code execution vulnerability in the ServiceAgent API exposed on port 10250. The endpoint /api/ServiceAgent/start_service accepts user-supplied input via POST and fails to sanitize command-like payloads. An attacker can inject shell syntax that is interpreted by the backend, enabling arbitrary command execution. The vulnerability is presumed to affect builds released prior to August 2025 and is said to be remediated in newer versions of the product, though the exact affected range remains undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 UTC.

An authenticated multi-stage remote code execution vulnerability exists in Riverbed SteelCentral NetProfiler and NetExpress 10.8.7 virtual appliances. A SQL injection vulnerability in the '/api/common/1.0/login' endpoint can be exploited to create a new user account in the appliance database. This user can then trigger a command injection vulnerability in the '/index.php?page=licenses' endpoint to execute arbitrary commands. The attacker may escalate privileges to root by exploiting an insecure sudoers configuration that allows the 'mazu' user to execute arbitrary commands as root via SSH key extraction and command chaining. Successful exploitation allows full remote root access to the virtual appliance.

An OS command injection vulnerability exists in sar2html version 3.2.2 and prior via the plot parameter in index.php. The application fails to sanitize user-supplied input before using it in a system-level context. Remote, unauthenticated attackers can inject shell commands by appending them to the plot parameter (e.g., ?plot=;id) in a crafted GET request. The output of the command is displayed in the application's interface after interacting with the host selection UI. Successful exploitation leads to arbitrary command execution on the underlying system. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC.

In MITRE Caldera through 4.2.0 and 5.0.0 before 35bc06e, a Remote Code Execution (RCE) vulnerability was found in the dynamic agent (implant) compilation functionality of the server. This allows remote attackers to execute arbitrary code on the server that Caldera is running on via a crafted web request to the Caldera server API used for compiling and downloading of Caldera's Sandcat or Manx agent (implants). This web request can use the gcc -extldflags linker flag with sub-commands.

WeGIA is a Web manager for charitable institutions. An OS Command Injection vulnerability was discovered in versions prior to 3.2.15 of the WeGIA application, `importar_dump.php` endpoint. This vulnerability could allow an attacker to execute arbitrary code remotely. The command is basically a command to move a temporary file, so a webshell upload is also possible. Version 3.2.15 contains a patch for the issue.

WeGIA is an open source Web Manager for Institutions with a focus on Portuguese language users. An OS Command Injection vulnerability was discovered in the WeGIA application, `gerenciar_backup.php` endpoint. This vulnerability could allow an attacker to execute arbitrary code remotely. This issue has been addressed in version 3.2.14 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

NPM package gitlabhook version 0.0.17 is vulnerable to a Command Injection vulnerability. Arbitrary commands can be injected through the repository name.

IBM API Connect 5.0.0.0 and 5.0.8.6 Developer Portal is vulnerable to command injection. An attacker with a specially crafted request can run arbitrary code on the server and gain complete access to the system. IBM X-Force ID: 159123.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Veribilim Software Veribase Order Management allows OS Command Injection.This issue affects Veribase Order Management: before v4.010.2.

Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment.

An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.

Multiple D-Link DIR-series routers, including DIR-110, DIR-412, DIR-600, DIR-610, DIR-615, DIR-645, and DIR-815 firmware version 1.03, contain a vulnerability in the service.cgi endpoint that allows remote attackers to execute arbitrary system commands without authentication. The flaw stems from improper input handling in the EVENT=CHECKFW parameter, which is passed directly to the system shell without sanitization. A crafted HTTP POST request can inject commands that are executed with root privileges, resulting in full device compromise. These router models are no longer supported at the time of assignment and affected version ranges may vary. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-08-21 UTC.

GeoVision embedded IP devices, confirmed on GV-BX1500 and GV-MFD1501, contain a remote command injection vulnerability via /PictureCatch.cgi that enables an attacker to execute arbitrary commands on the device. The vulnerable models have been declared end-of-life (EOL) by the vendor. VulnCheck has observed this vulnerability being exploited in the wild as of 2025-10-19 08:55:13.141502 UTC.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.