In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Check tbo resource pointer Validate tbo resource pointer, skip if NULL

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip wbscl_set_scaler_filter if filter is null Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: video/aperture: optionally match the device in sysfb_disable() In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled()

In the Linux kernel, the following vulnerability has been resolved: ice: protect XDP configuration with a mutex The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range [Why & How] ASSERT if return NULL from kcalloc.

In the Linux kernel, the following vulnerability has been resolved: ice: Add netif_device_attach/detach into PF reset flow Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner.

In the Linux kernel, the following vulnerability has been resolved: filemap: Handle sibling entries in filemap_get_read_batch() If a read races with an invalidation followed by another read, it is possible for a folio to be replaced with a higher-order folio. If that happens, we'll see a sibling entry for the new folio in the next iteration of the loop. This manifests as a NULL pointer dereference while holding the RCU read lock. Handle this by simply returning. The next call will find the new folio and handle it correctly. The other ways of handling this rare race are more complex and it's just not worth it.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future.

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Fix RTAS MSR[HV] handling for Cell The semi-recent changes to MSR handling when entering RTAS (firmware) cause crashes on IBM Cell machines. An example trace: kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0x2fff01a8 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207 NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000 REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a) MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000 ... NIP 0x2fff01a8 LR 0x32608 Call Trace: 0xc00000000143c5f8 (unreliable) .rtas_call+0x224/0x320 .rtas_get_boot_time+0x70/0x150 .read_persistent_clock64+0x114/0x140 .read_persistent_wall_and_boot_offset+0x24/0x80 .timekeeping_init+0x40/0x29c .start_kernel+0x674/0x8f0 start_here_common+0x1c/0x50 Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell machines Linux runs with MSR[HV] set but also uses RTAS, provided by SLOF. Fix it by copying the MSR[HV] bit from the MSR value we've just read using mfmsr into the value used for RTAS. It seems like we could also fix it using an #ifdef CELL to set MSR[HV], but that doesn't work because it's possible to build a single kernel image that runs on both Cell native and pseries.

In the Linux kernel, the following vulnerability has been resolved: rose: Fix NULL pointer dereference in rose_send_frame() The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash at mt7921_pci_remove The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync() BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems.

In the Linux kernel, the following vulnerability has been resolved: mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: eth: mlx4: Fix IS_ERR() vs NULL check bug in mlx4_en_create_rx_ring Replace NULL check with IS_ERR() check after calling page_pool_create() since this function returns error pointers (ERR_PTR). Using NULL check could lead to invalid pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed.

In the Linux kernel, the following vulnerability has been resolved: kernfs: fix potential NULL dereference in __kernfs_remove When lockdep is enabled, lockdep_assert_held_write would cause potential NULL pointer dereference. Fix the following smatch warnings: fs/kernfs/dir.c:1353 __kernfs_remove() warn: variable dereferenced before check 'kn' (see line 1346)

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix NULL deref in ntfs_update_mftmirr If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL. Code should check this ptr before dereferencing. Syzbot hit this issue via passing wrong mount param as can be seen from log below Fail log: ntfs3: Unknown parameter 'iochvrset' general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0 ... Call Trace: <TASK> put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463 ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363 put_fs_context+0x119/0x7a0 fs/fs_context.c:469 do_new_mount+0x2b4/0xad0 fs/namespace.c:3044 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline]

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Allow probing without .driver_data Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type.

In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: locking/csd_lock: Change csdlock_debug from early_param to __setup The csdlock_debug kernel-boot parameter is parsed by the early_param() function csdlock_debug(). If set, csdlock_debug() invokes static_branch_enable() to enable csd_lock_wait feature, which triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and CONFIG_SPARSEMEM_VMEMMAP=n. With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in static_key_enable() and returns NULL, resulting in a NULL dereference because mem_section is initialized only later in sparse_init(). This is also a problem for powerpc because early_param() functions are invoked earlier than jump_label_init(), also resulting in static_key_enable() failures. These failures cause the warning "static key 'xxx' used before call to jump_label_init()". Thus, early_param is too early for csd_lock_wait to run static_branch_enable(), so changes it to __setup to fix these.

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then.

In the Linux kernel, the following vulnerability has been resolved: iio: light: isl29028: Fix the warning in isl29028_remove() The driver use the non-managed form of the register function in isl29028_remove(). To keep the release order as mirroring the ordering in probe, the driver should use non-managed form in probe, too. The following log reveals it: [ 32.374955] isl29028 0-0010: remove [ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI [ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0 [ 32.385461] Call Trace: [ 32.385807] sysfs_unmerge_group+0x59/0x110 [ 32.386110] dpm_sysfs_remove+0x58/0xc0 [ 32.386391] device_del+0x296/0xe50 [ 32.386959] cdev_device_del+0x1d/0xd0 [ 32.387231] devm_iio_device_unreg+0x27/0xb0 [ 32.387542] devres_release_group+0x319/0x3d0 [ 32.388162] i2c_device_remove+0x93/0x1f0

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereferences without iommu Check if 'aspace' is set before using it as it will stay null without IOMMU, such as on msm8974.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing.

In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix missing i_op in ntfs_read_mft There is null pointer dereference because i_op == NULL. The bug happens because we don't initialize i_op for records in $Extend.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix error handling in ata_tdev_add() In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: do not print NULL LLI during error During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix null pointer dereference of pointer perfmon In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked.

In the Linux kernel, the following vulnerability has been resolved: soc: bcm: Check for NULL return of devm_kzalloc() As the potential failure of allocation, devm_kzalloc() may return NULL. Then the 'pd->pmb' and the follow lines of code may bring null pointer dereference. Therefore, it is better to check the return value of devm_kzalloc() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix null pointer dereference Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032)

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset Issuing a reset when the driver is loaded without RDMA support, will results in a crash as it attempts to remove RDMA's non-existent auxbus device: echo 1 > /sys/class/net/<if>/device/reset BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice] ... Call Trace: <TASK> ice_prepare_for_reset+0x77/0x260 [ice] pci_dev_save_and_disable+0x2c/0x70 pci_reset_function+0x88/0x130 reset_store+0x5a/0xa0 kernfs_fop_write_iter+0x15e/0x210 vfs_write+0x273/0x520 ksys_write+0x6b/0xe0 do_syscall_64+0x79/0x3b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but pf->cdev_info will also be NULL, leading to the deref in the trace above. Introduce a flag to be set when the creation of the auxbus device is successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.

In the Linux kernel, the following vulnerability has been resolved: reset: uniphier-glue: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(res) invoked, if platform_get_resource() returns NULL.