In the Linux kernel, the following vulnerability has been resolved: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message]

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix use-after-free and memleak on unbind Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core.

In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: tun: avoid double free in tun_free_netdev Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix even more out of bound writes from debugfs CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland)

In the Linux kernel, the following vulnerability has been resolved: ACPI: custom_method: fix potential use-after-free issue In cm_write(), buf is always freed when reaching the end of the function. If the requested count is less than table.length, the allocated buffer will be freed but subsequent calls to cm_write() will still try to access it. Remove the unconditional kfree(buf) at the end of the function and set the buf to NULL in the -EINVAL error path to match the rest of function.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix use-after-free in i40e_client_subtask() Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free")

In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

Incorrect default permissions in .NET allows an authorized attacker to elevate privileges locally.

In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once.

In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix transfer-buffer overflows The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

In the Linux kernel, the following vulnerability has been resolved: Revert "Revert "block, bfq: honor already-setup queue merges"" A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix set_fmt error handling If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Use after free in __vmbus_open() The "open_info" variable is added to the &vmbus_connection.chn_msg_list, but the error handling frees "open_info" without removing it from the list. This will result in a use after free. First remove it from the list, and then free it.

In the Linux kernel, the following vulnerability has been resolved: pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix double free issue on err path fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Fix invalid error returning in mhi_queue mhi_queue returns an error when the doorbell is not accessible in the current state. This can happen when the device is in non M0 state, like M3, and needs to be waken-up prior ringing the DB. This case is managed earlier by triggering an asynchronous M3 exit via controller resume/suspend callbacks, that in turn will cause M0 transition and DB update. So, since it's not an error but just delaying of doorbell update, there is no reason to return an error. This also fixes a use after free error for skb case, indeed a caller queuing skb will try to free the skb if the queueing fails, but in that case queueing has been done.

In the Linux kernel, the following vulnerability has been resolved: net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove Access to netdev after free_netdev() will cause use-after-free bug. Move debug log before free_netdev() call to avoid it.

In the Linux kernel, the following vulnerability has been resolved: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest.

In the Linux kernel, the following vulnerability has been resolved: bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke des ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a user-after-free in add_pble_prm When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE info list. Add the chunk entry to the PBLE info list only after successful setting of the SD in irdma_hmc_sd_one.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

In the Linux kernel, the following vulnerability has been resolved: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space.

In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore.

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix READDIR buffer overflow If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing.

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use after free on rmmod plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]

In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix ltout double free on completion race Always remove linked timeout on io_link_timeout_fn() from the master request link list, otherwise we may get use-after-free when first io_link_timeout_fn() puts linked timeout in the fail path, and then will be found and put on master's free.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context() This function is called from ethtool_set_rxfh() and "*rss_context" comes from the user. Add some bounds checking to prevent memory corruption.

In the Linux kernel, the following vulnerability has been resolved: comedi: dt9812: fix DMA buffers on stack USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.

In the Linux kernel, the following vulnerability has been resolved: drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap drm_gem_ttm_mmap() drops a reference to the gem object on success. If the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that drop will free the gem object, and the subsequent drm_gem_object_get() will be a UAF. Fix by grabbing a reference before calling the mmap helper. This issue was forseen when the reference dropping was adding in commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"): "For that to work properly the drm_gem_object_get() call in drm_gem_ttm_mmap() must be moved so it happens before calling obj->funcs->mmap(), otherwise the gem refcount would go down to zero."

In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

In the Linux kernel, the following vulnerability has been resolved: atm: iphase: fix possible use-after-free in ia_module_exit() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow.