In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix memleak when mt7615_unregister_device() mt7615_tx_token_put() should get call before mt76_free_pending_txwi().

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in cfusbl_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_fill_super Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()' All error handling paths lead to 'out' where many resources are freed. Do it as well here instead of a direct return, otherwise 'log', 'ra' and 'log->one_page_buf' (at least) will leak.

In the Linux kernel, the following vulnerability has been resolved: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. [wsa: fixed title]

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error.

In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: sai: fix OF node leak on probe The reference taken to the sync provider OF node when probing the platform device is currently only dropped if the set_sync() callback fails during DAI probe. Make sure to drop the reference on platform probe failures (e.g. probe deferral) and on driver unbind. This also avoids a potential use-after-free in case the DAI is ever reprobed without first rebinding the platform driver.

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: socinfo: Add kfree for kstrdup Add kfree() in the later error handling in order to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails.

In the Linux kernel, the following vulnerability has been resolved: net: skb_partial_csum_set() fix against transport header magic value skb->transport_header uses the special 0xFFFF value to mark if the transport header was set or not. We must prevent callers to accidentaly set skb->transport_header to 0xFFFF. Note that only fuzzers can possibly do this today. syzbot reported: WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 skb_transport_offset include/linux/skbuff.h:2956 [inline] WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Modules linked in: CPU: 0 PID: 2340 Comm: syz-executor.0 Not tainted 6.3.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:skb_transport_header include/linux/skbuff.h:2847 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2956 [inline] RIP: 0010:virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Code: 41 39 df 0f 82 c3 04 00 00 48 8b 7c 24 10 44 89 e6 e8 08 6e 59 ff 48 85 c0 74 54 e8 ce 36 7e fc e9 37 f8 ff ff e8 c4 36 7e fc <0f> 0b e9 93 f8 ff ff 44 89 f7 44 89 e6 e8 32 38 7e fc 45 39 e6 0f RSP: 0018:ffffc90004497880 EFLAGS: 00010293 RAX: ffffffff84fea55c RBX: 000000000000ffff RCX: ffff888120be2100 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc90004497990 R08: ffffffff84fe9de5 R09: 0000000000000034 R10: ffffea00048ebd80 R11: 0000000000000034 R12: ffff88811dc2d9c8 R13: dffffc0000000000 R14: ffff88811dc2d9ae R15: 1ffff11023b85b35 FS: 00007f9211a59700(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200002c0 CR3: 00000001215a5000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> packet_snd net/packet/af_packet.c:3076 [inline] packet_sendmsg+0x4590/0x61a0 net/packet/af_packet.c:3115 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] __sys_sendto+0x472/0x630 net/socket.c:2144 __do_sys_sendto net/socket.c:2156 [inline] __se_sys_sendto net/socket.c:2152 [inline] __x64_sys_sendto+0xe5/0x100 net/socket.c:2152 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f9210c8c169 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9211a59168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9210dabf80 RCX: 00007f9210c8c169 RDX: 000000000000ffed RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00007f9210ce7ca1 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe135d65cf R14: 00007f9211a59300 R15: 0000000000022000

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fw: fix memory leak in debugfs Fix a memory leak that occurs when reading the fw_info file all the way, since we return NULL indicating no more data, but don't free the status tracking object.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: fix memory leaks and invalid access at probe error path Deinitialize at reverse order when probe fails. When init_sw_vars fails, rtl_deinit_core should not be called, specially now that it destroys the rtl_wq workqueue. And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be leaked. Remove pci_set_drvdata call as it will already be cleaned up by the core driver code and could lead to memory leaks too. cf. commit 8d450935ae7f ("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory").

In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix possible memory leak for vcap_dup_rule() Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak occurs. If kzalloc() for duprule succeeds, but the following kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree them in the error path. unreferenced object 0xffff122744c50600 (size 192): comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'... backtrace: [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8 [<0000000001bedc67>] kmalloc_trace+0x38/0x88 [<00000000b0612f98>] vcap_dup_rule+0x50/0x460 [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038 [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494 [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698 [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94 [<00000000f6864acf>] kthread+0x2e8/0x374 [<0000000022e639b3>] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential memleak in dasd_eckd_init() `dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it also needs to be freed before the error returns, just like the other cases in this function.

In the Linux kernel, the following vulnerability has been resolved: staging: pi433: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. This requires saving off the root directory dentry to make creation of individual device subdirectories easier.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix leak of 'r10bio->remaining' for recovery raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create The memory pointed to by the fs->any pointer is not freed in the error path of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_fs_tt_redirect_any_destroy().

In the Linux kernel, the following vulnerability has been resolved: spi: qup: Don't skip cleanup in remove's error path Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails.

In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp().

In the Linux kernel, the following vulnerability has been resolved: cassini: Fix a memory leak in the error handling path of cas_init_one() cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows: [cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the -wait- process indefinitely. In commit 3288666c7256 ("fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()"), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed. By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix fout leak in hbm's run_bpf_prog Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope.

In the Linux kernel, the following vulnerability has been resolved: USB: dwc3: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed.

In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe() If 'mipid_detect()' fails, we must free 'md' to avoid a memory leak.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix memory leaks in i915 selftests This patch fixes memory leaks on error escapes in function fake_get_pages (cherry picked from commit 8bfbdadce85c4c51689da10f39c805a7106d4567)

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request() The memory allocated in tb_queue_dp_bandwidth_request() needs to be released once the request is handled to avoid leaking it.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix memory leak on last export_udmabuf() error path In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix skb_copy_ubufs() vs BIG TCP David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy using hugepages, and skb length bigger than ~68 KB. skb_copy_ubufs() assumed it could copy all payload using up to MAX_SKB_FRAGS order-0 pages. This assumption broke when BIG TCP was able to put up to 512 KB per skb. We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45 and limit gso_max_size to 180000. A solution is to use higher order pages if needed. v2: add missing __GFP_COMP, or we leak memory.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix memory leak in rtw_usb_probe() drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix memory leak in mes self test The fences associated with mes queue have to be freed up during amdgpu_ring_fini.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Do `kfree_skb(new)` before `goto out` to prevent potential leak.

In the Linux kernel, the following vulnerability has been resolved: media: mdp3: Fix resource leaks in of_find_device_by_node Use put_device to release the object get through of_find_device_by_node, avoiding resource leaks.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning.

In the Linux kernel, the following vulnerability has been resolved: tun: Fix memory leak for detached NAPI queue. syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [< ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drivers: base: component: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: ionic: Fix netdev notifier unregister on failure If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered.

In the Linux kernel, the following vulnerability has been resolved: misc: vmw_balloon: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reset_method_store() memory leak In reset_method_store(), a string is allocated via kstrndup() and assigned to the local "options". options is then used in with strsep() to find spaces: while ((name = strsep(&options, " ")) != NULL) { If there are no remaining spaces, then options is set to NULL by strsep(), so the subsequent kfree(options) doesn't free the memory allocated via kstrndup(). Fix by using a separate tmp_options to iterate with strsep() so options is preserved.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix SKB corruption in REO destination ring While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix fget leak when fs don't support nowait buffered read Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1] Do the following steps can reproduce this BUG: mount -t ocfs2 /dev/vdc /mnt/ocfs2 cp testfile /mnt/ocfs2/ ./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1 umount /mnt/ocfs2 Then umount will fail, and it outputs: umount: /mnt/ocfs2: target is busy. While tracing umount, it blames mnt_get_count() not return as expected. Do a deep investigation for fget()/fput() on related code flow, I've finally found that fget() leaks since ocfs2 doesn't support nowait buffered read. io_issue_sqe |-io_assign_file // do fget() first |-io_read |-io_iter_do_read |-ocfs2_file_read_iter // return -EOPNOTSUPP |-kiocb_done |-io_rw_done |-__io_complete_rw_common // set REQ_F_REISSUE |-io_resubmit_prep |-io_req_prep_async // override req->file, leak happens This was introduced by commit a196c78b5443 in v5.18. Fix it by don't re-assign req->file if it has already been assigned. [1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() There is a memory leaks problem reported by kmemleak: unreferenced object 0xffff888102007a00 (size 128): comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi] [<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi] [<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi] [<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170 [<ffffffff83c142a5>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This is due to a mismatch between create and destroy interfaces, and in detail that "new_eba_tbl" created by ubi_eba_create_table() but destroyed by kfree(), while will causing "new_eba_tbl->entries" not freed. Fix it by replacing kfree(new_eba_tbl) with ubi_eba_destroy_table(new_eba_tbl)

drivers/bluetooth/virtio_bt.c in the Linux kernel before 5.16.3 has a memory leak (socket buffers have memory allocated but not freed).

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix a memory leak Add a forgotten kfree().

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup} If the filename casefolding fails, we'll be leaking memory from the fscrypt_name struct, namely from the 'crypto_buf.name' member. Make sure we free it in the error path on both ext4_fname_setup_filename() and ext4_fname_prepare_lookup() functions.

In the Linux kernel, the following vulnerability has been resolved: tracing: Free error logs of tracing instances When a tracing instance is removed, the error messages that hold errors that occurred in the instance needs to be freed. The following reports a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger # cat instances/foo/error_log [ 117.404795] hist:sched:sched_switch: error: Couldn't find field Command: hist:keys=x ^ # rmdir instances/foo Then check for memory leaks: # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88810d8ec700 (size 192): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff `.ha....`.ha.... a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00 .0......&....... backtrace: [<00000000dae26536>] kmalloc_trace+0x2a/0xa0 [<00000000b2938940>] tracing_log_err+0x277/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff888170c35a00 (size 32): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74 . Command: hist 3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00 :keys=x......... backtrace: [<000000006a747de5>] __kmalloc+0x4d/0x160 [<000000000039df5f>] tracing_log_err+0x29b/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc The problem is that the error log needs to be freed when the instance is removed.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: fix of_iomap memory leak Smatch reports: drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn: 'base' from of_iomap() not released on lines: 496. This problem was also found in linux-next. In mtk_clk_simple_probe(), base is not released when handling errors if clk_data is not existed, which may cause a leak. So free_base should be added here to release base.