Improper validation of certificate with host mismatch in Apache Log4j SMTP appender. This could allow an SMTPS connection to be intercepted by a man-in-the-middle attack which could leak any log messages sent through that appender. Fixed in Apache Log4j 2.12.3 and 2.13.1

Secrets in Variables saved as JSON dictionaries were not properly redacted - in case thee variables were retrieved by the user the secrets stored as nested fields were not masked. If you do not store variables with sensitive values in JSON form, you are not affected. Otherwise please upgrade to Apache Airflow 3.2.0 that has the fix implemented

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input.

The simplified implementation of blocking reads and writes introduced in Tomcat 10 and back-ported to Tomcat 9.0.47 onwards exposed a long standing (but extremely hard to trigger) concurrency bug in Apache Tomcat 10.1.0 to 10.1.0-M12, 10.0.0-M1 to 10.0.18, 9.0.0-M1 to 9.0.60 and 8.5.0 to 8.5.77 that could cause client connections to share an Http11Processor instance resulting in responses, or part responses, to be received by the wrong client.

A timing attack against mod_auth_digest in Apache HTTP Server 2.4.66 allows a bypass of Digest authentication by a remote attacker. Users are recommended to upgrade to version 2.4.67, which fixes this issue.

Apache Hive cookie signature verification used a non constant time comparison which is known to be vulnerable to timing attacks. This could allow recovery of another users cookie signature. The issue was addressed in Apache Hive 2.3.8

Observable Timing Discrepancy vulnerability in Apache Shiro. This issue affects Apache Shiro: from 1.*, 2.* before 2.0.7. Users are recommended to upgrade to version 2.0.7 or later, which fixes the issue. Prior to Shiro 2.0.7, code paths for non-existent vs. existing users are different enough, that a brute-force attack may be able to tell, by timing the requests only, determine if the request failed because of a non-existent user vs. wrong password. The most likely attack vector is a local attack only. Shiro security model  https://shiro.apache.org/security-model.html#username_enumeration  discusses this as well. Typically, brute force attack can be mitigated at the infrastructure level.

Use of Arrays.equals() in LlapSignerImpl in Apache Hive to compare message signatures allows attacker to forge a valid signature for an arbitrary message byte by byte. The attacker should be an authorized user of the product to perform this attack. Users are recommended to upgrade to version 4.0.0, which fixes this issue. The problem occurs when an application doesn’t use a constant-time algorithm for validating a signature. The method Arrays.equals() returns false right away when it sees that one of the input’s bytes are different. It means that the comparison time depends on the contents of the arrays. This little thing may allow an attacker to forge a valid signature for an arbitrary message byte by byte. So it might allow malicious users to submit splits/work with selected signatures to LLAP without running as a privileged user, potentially leading to DDoS attack. More details in the reference section.

The authentication method in Apache Doris versions before 2.0.0 was vulnerable to timing attacks. Users are recommended to upgrade to version 2.0.0 + or 1.2.8, which fixes this issue.

Silverware Games is a premium social network where people can play games online. When using the Recovery form, a noticeably different amount of time passes depending of whether the specified email address presents in our database or not. This has been fixed in version 1.3.7.

Mattermost versions 10.5.x <= 10.5.10, 10.11.x <= 10.11.2 fail to use constant-time comparison for sensitive string comparisons which allows attackers to exploit timing oracles to perform byte-by-byte brute force attacks via response time analysis on Cloud API keys and OAuth client secrets

Hono before 4.11.10 contains a timing attack vulnerability in the basicAuth and bearerAuth middlewares due to non-constant-time string comparison in the timingSafeEqual function. Attackers can exploit early termination of string equality checks to infer valid credentials through precise timing measurements.

A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure.

OpenClaw before 2026.4.2 contains a timing side channel vulnerability in shared-secret comparison call sites that use early length-mismatch checks instead of fixed-length comparison helpers. Attackers can measure timing differences to leak secret-length information, weakening constant-time handling for shared secrets.

phpseclib is a PHP secure communications library. Starting in 0.1.1 and prior to 3.0.51, 2.0.53, and 1.0.28, phpseclib\Net\SSH2::get_binary_packet() uses PHP's != operator to compare a received SSH packet HMAC against the locally computed HMAC. != on equal-length binary strings in PHP uses memcmp(), which short-circuits on the first differing byte. This is a real variable-time comparison (CWE-208), proven by scaling benchmarks. This vulnerability is fixed in 3.0.51, 2.0.53, and 1.0.28.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.8.0-alpha.6 and 8.6.74, he login endpoint response time differs measurably depending on whether the submitted username or email exists in the database. When a user is not found, the server responds immediately. When a user exists but the password is wrong, a bcrypt comparison runs first, adding significant latency. This timing difference allows an unauthenticated attacker to enumerate valid usernames. This vulnerability is fixed in 9.8.0-alpha.6 and 8.6.74.

OpenClaw versions prior to 2026.2.13 use non-constant-time string comparison for hook token validation, allowing attackers to infer tokens through timing measurements. Remote attackers with network access to the hooks endpoint can exploit timing side-channels across multiple requests to gradually recover the authentication token.

Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 comtain BasicAuth middleware that allows username enumeration via a timing attack. When a submitted username exists, the middleware performs a bcrypt password comparison taking ~166ms. When the username does not exist, the response returns immediately in ~0.6ms. This ~298x timing difference is observable over the network and allows an unauthenticated attacker to reliably distinguish valid from invalid usernames. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2.

Vulnerability in Spring Spring Security. If an application is using the UserDetails#isEnabled, #isAccountNonExpired, or #isAccountNonLocked user attributes, to enable, expire, or lock users, then DaoAuthenticationProvider's timing attack defense can be bypassed for users who are disabled, expired, or locked.This issue affects Spring Security: from 5.7.0 through 5.7.22, from 5.8.0 through 5.8.24, from 6.3.0 through 6.3.15, from 6.5.0 through 6.5.9, from 7.0.0 through 7.0.4.

CryptX versions before 0.088_001 for Perl compare AEAD authentication tags in non-constant time in the streaming decrypt_done path. The decrypt_done($tag) form compares it against the computed tag with memNE (memcmp() != 0), which short-circuits on the first differing byte, so its run time depends on the number of matching leading bytes. This affects all five AEAD modes: GCM, CCM, ChaCha20Poly1305, EAX and OCB. The one-shot *_decrypt_verify helpers are unaffected; they verify the tag inside libtomcrypt with a constant-time comparison. The timing difference is a tag-verification oracle. An attacker who can submit many candidate tags for the same nonce, ciphertext and associated data while measuring the timing precisely enough may recover the expected tag byte by byte and forge a message that verifies.

Shopware is an open commerce platform. Prior to versions 6.6.10.18 and 6.7.10.1, an attacker is able to enumerate the usernames of administrator users by performing a timing attack. Versions 6.6.10.18 and 6.7.10.1 fix the issue.

An issue was discovered in OpenSlides before 4.2.5. During login at the /system/auth/login/ endpoint, the system's response times differ depending on whether a user exists in the system. The timing discrepancy stems from the omitted hashing of the password (e.g., more than 100 milliseconds).

ApostropheCMS is an open-source Node.js content management system. Versions 4.28.0 and prior contain a timing side-channel vulnerability in the password reset endpoint (/api/v1/@apostrophecms/login/reset-request) that allows unauthenticated username and email enumeration. When a user is not found, the handler returns after a fixed 2-second artificial delay, but when a valid user is found, it performs a MongoDB update and SMTP email send with no equivalent delay normalization, producing measurably different response times. The endpoint also accepts both username and email via an $or query, and has no rate limiting as the existing checkLoginAttempts throttle only applies to the login flow. This enables automated enumeration of valid accounts for use in credential stuffing or targeted phishing. Only instances that have explicitly enabled the passwordReset option are affected, as it defaults to false. This issue has been fixed in version 4.29.0.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a timing side-channel vulnerability in Traefik's BasicAuth middleware that allows an attacker to enumerate valid usernames through response-time differences. The variable intended to hold a constant-time fallback secret always resolves to an empty string, causing the constant-time comparison to short-circuit in microseconds rather than performing a full bcrypt evaluation. This restores the original timing oracle and makes it possible to distinguish existing users from non-existing ones by measuring authentication response times. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

FastAPI Api Key provides a backend-agnostic library that provides an API key system. Version 1.1.0 has a timing side-channel vulnerability in verify_key(). The method applied a random delay only on verification failures, allowing an attacker to statistically distinguish valid from invalid API keys by measuring response latencies. With enough repeated requests, an adversary could infer whether a key_id corresponds to a valid key, potentially accelerating brute-force or enumeration attacks. All users relying on verify_key() for API key authentication prior to the fix are affected. Users should upgrade to version 1.1.0 to receive a patch. The patch applies a uniform random delay (min_delay to max_delay) to all responses regardless of outcome, eliminating the timing correlation. Some workarounds are available. Add an application-level fixed delay or random jitter to all authentication responses (success and failure) before the fix is applied and/or use rate limiting to reduce the feasibility of statistical timing attacks.

Note Mark is an open-source note-taking application. In versions 0.19.1 and prior, the login endpoint performs bcrypt password verification only when the supplied username exists, returning immediately for nonexistent usernames. This timing discrepancy allows unauthenticated attackers to enumerate valid usernames by measuring response times, enabling targeted credential attacks. This issue has been fixed in version 0.19.2.

A flaw was found in 389 Directory Server. The PBKDF2-SHA256 password verification function uses standard memcmp() for comparing password hashes instead of a constant-time comparison function. A remote attacker could potentially use timing measurements of LDAP bind attempts to infer partial hash information, though practical exploitation is extremely difficult due to PBKDF2 computational overhead.

The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). It is possible to find out usernames from the response time of login requests. This could aid attackers in credential attacks. Version 4.2.0 patches this vulnerability.